Benro S4PRO Video Head
The Benro S4PRO Video Head is both robust and lightweight, supporting DSLR or Mirrorless cameras up to 4 kg. It is equipped with a 60mm flat base with a 3/8" thread, allowing efficient movement between compatible tripods and sliders, jibs, monopods, and various other support gear. For lighter loads, the S4PRO utilises 1-2 steps of adjustable counterbalance via a button on one side - offers fixed pan and tilt drag. This video head has a versatile tilt range of +90/-7 More
Finance options available
The Benro S4PRO Video Head is both robust and lightweight, supporting DSLR or Mirrorless cameras up to 4 kg. It is equipped with a 60mm flat base with a 3/8" thread, allowing efficient movement between compatible tripods and sliders, jibs, monopods, and various other support gear. For lighter loads, the S4PRO utilises 1-2 steps of adjustable counterbalance via a button on one side - offers fixed pan and tilt drag. This video head has a versatile tilt range of +90/-75° and a full 360° pan range; attach additional accessories via two 1/4"-20 threaded holes (can secure articulating arms). The rugged magnesium/aluminium construction of the S4PRO Head incorporates two rosette adapters (L and R) to attach the pan bar. For optimal camera balance, the camera plate can be adjusted forward/back - safety lock ensures the plate cannot slip out of place.
Benro S4PRO Video Head Key Features:
- 60mm flat base with ?"-16 thread
- 4kg payload
- Compatible with 60mm flat base tripods - or attached directly to most sliders, jibs, and monopods
- 1-2 steps of counterbalance
- Fixed pan and tilt drag
- Independent pan and tilt locks
- +90/-75° tilt range
- 360° pan range
- 1/4"-20 and 3/8"-16 camera screws included - stored underneath camera plate
- Two1/4"-20 threaded holes for the addition of accessories
- Magnesium and aluminium construction
- Pan bar attached via rosette adapters (L and R)
- Sliding camera plate with secure safety lock
Expanded Benro S4PRO Video Head Key Features:
Counterbalance
The S4PRO differs from the heavier-set S6PRO and S8PRO by being neutrally set at 1 step of counterbalance. By pressing the button to the side of the head, an additional step is added to increase the overall steps of counterbalance to 2 - by the side of the release button is a switch to reverse it back to 1.
What's in the box?
- 1 x Benro S4PRO Video Head
- 1 x Quick Release Plate for S4PRO
- 1 x 1/4"-20 Camera Screw
- 1 x 3/8"-16 Camera Screw
- 1 x Pan Bar
Benro S4 Pro Video Head Product Video:
Benro S4PRO Video Head
FAQs:
Where are Benro tripods made?
Benro tripods and tripod heads (Benro Precision Photography Industry Co. LTD) are made from a facility in Hong Kong.
Back to top