Boom Arms and Supports
The California Sunbounce Enterprise Grip Head offers an ideal way to mount all sizes (except 20 x 20 inch Sun-Scrim) of Sunbounce frames to a light-stand. The grip head's tunnel clamps are two different sizes to accommodate the two sizes of tubing used by California Sunbounce. It has a 5/8 inch (16 mm) receiver for standard light-stand stud mounts.
This lighting boom is designed to attach to a wall and folds neaty against the wall when not in use. There are two telescoping sections with a 180° horizontal and 160° vertical range of motion, extending a maximum of 1.22m. Lighting kit is affixed via a 5/8 inch socket and double ended 1/4 inch and 3/8 inch stud.
Manfrotto's aluminium Autopole simply clamps between the studio floor and ceiling. This shorter model extends between 1.5 and 2.7m in height. Pole diameters are 45mm and 40mm.
The Manfrotto 033B Autopole Extension Bar is a 40mm diameter bar designed to either be used in conjunction with a Super Clamp or similar clamp as a crossbar or to extend your Autopole by 2m.
The Manfrotto 032BASEB is a tripod base for use with Manfrotto Autopoles, allowing you to use your Autopole on location or where the ceilings are particularly high. The legs have a spread of 130cm, providing a stable base platform.
The Manfrotto 396B-3 3-Section Double Arm is a lightweight double articulated arm which can be used to support studio equipment weighing up to 4.5kg, at maximum extension. The locking system is simple to operate and adjust and the arm features a 16mm hexagonal/universal spigot on the bottom end and a 16mm spigot 3/8 inch light attachment on the top which
The Manfrotto 170 Mini Floor to Ceiling Pole is a spring-loaded pole which extends between 175cm and 330cm.
The Rotolight 10inch Articulated Arm Kit is manufactured from anodised steel and allows you to mount your Rotolight directly to the included clamp which in turn can then be attached to a tube up to 35mm in diameter. This cinematic arm features 1/4" 20 screws, and two fully adjustable 360 degree ballheads, allowing you to mount your accessory in virtually
Steel-constructed for extra strength and rigidity, the Matthews Mini Boom extends from 115cm to 203cm and mounts on a standard 5/8 inch lighting stand. The boom-end terminated with a 5/8 inch lighting stud at one end, and a hook for ballast at the other.
The Limelite Mosaic 2x1 Panel Mounting Kit allows two Mosaic LED panels to be mounted side by side onto a single medium/heavy-duty lighting stand. It includes a wide mounting stirrup with full swivel and tilt for stand/HiGlide mounting and is cabled to allow both Mosaic panels to be simultaneously controlled from either panel via their on-board DMX in/out
The Rosco LitePad Axiom Wall Plate Bracket has a wall plate which allows a LitePad to be attached or screwed onto almost any surface. The maximum load capacity is 20lbs.
For rock-steady stability and peace of mind, these solid stainless steel, industry standard arms and grip heads are hard to beat. Both the arm and the 64mm grip head are equipped with 9.5mm (3/8) and 16mm (5/8) holes.