Boom Arms and Supports

86 Matching Products Displaying Page 5 of 8

Rotolight Anova Double Yoke

Find out more about the Rotolight Anova Double Yoke

The Rotolight Double Yoke will allow you to mount two Anova lights to one lighting stand (not included). It comes complete with a T connector plate and mounting plate.

In StockSave £10Free delivery available
£95.00Was £105.00

1x Rotolight Anova Double Yoke

This item is already in your basket

Rotolight Anova Double Yoke

Manfrotto Dado - 6 Rods
4.0

Find out more about the Manfrotto Dado - 6 Rods

The Manfrotto Dado is a universal junction that can be used to connect every kind of device from monitors to cameras, and from lights to supports. You can create your own professional set up in the most intuitive way. It is designed to be a small, versatile and sturdy solution that provides a multiple attachment point for lights, cameras and accessories

Special OrderFree delivery available
£94.00

1x Manfrotto Dado - 6 Rods

This item is already in your basket

Manfrotto Dado - 6 Rods

Calumet Boom Arm - Standard

Find out more about the Calumet Boom Arm - Standard

The Calumet Boom Arm – Standard, assembles in less than 5 minutes and features an angle indicator that rotates the head 360 degrees on its arm. The boom measures 290cm with a reach of 180cm. A unique double-beam parallelogram design maintains the angle of light as you move it up and down.It includes two 5.6Kg shot counterweight bag. Mounts to any Cine stand

Awaiting StockFree delivery available
£285.00

1x Calumet Boom Arm - Standard

This item is already in your basket

Calumet Boom Arm - Standard

Manfrotto 396B-2 2-Section Double Arm with Camera Bracket

Find out more about the Manfrotto 396B-2 2-Section Double Arm with Camera Bracket

The Manfrotto 396B-3 2-Section Double Arm is a lightweight double articulated arm which can be used to support studio equipment weighing up to 5kg at maximum extension. The locking system is simple to operate and adjust. The arm features a 16mm hexagonal/universal spigot on the bottom end and a 16mm spigot 3/8 inch light attachment on the top, which attaches

Special OrderFree delivery available
£109.00

1x Manfrotto 396B-2 2-Section Double Arm with Camera Bracket

This item is already in your basket

Manfrotto 396B-2 2-Section Double Arm with Camera Bracket

Manfrotto 231ARM Sliding Support Arm

Find out more about the Manfrotto 231ARM Sliding Support Arm

This quick-realease support arm is for attaching lighting fixtures to a Manfrotto 231 or 231CS column stand, or any other 9.5mm pole. The hand grip release allows the height to be easily adjusted. It is equipped with a stadnard lighting spigot.

Special OrderSave £2
£44.00RRP £46.95

1x Manfrotto 231ARM Sliding Support Arm

This item is already in your basket

Manfrotto 231ARM Sliding Support Arm

Rotolight AEOS Yoke

Find out more about the Rotolight AEOS Yoke

A yoke for the Rotolight AEOS LED light which enables the AEOS to be mounted in a traditional method, for C stand, or studio operation. Includes mounting knobs.

Special OrderFree delivery available
£74.99

1x Rotolight AEOS Yoke

This item is already in your basket

Rotolight AEOS Yoke

Manfrotto 024B Black Light Boom

Find out more about the Manfrotto 024B Black Light Boom

The Manfrotto 024B Black Light Boom attaches to light stands with diameters of 19, 20, 25 or 28mm. It has three sections - the slimmest of which is 25mm in diameter - and includes a Manfrotto 124 Pivot Clamp, counter-weight, cable clips and locking key.

Special OrderFree delivery available
£164.00

1x Manfrotto 024B Black Light Boom

This item is already in your basket

Manfrotto 024B Black Light Boom

Rotolight 6inch Articulated Arm Kit

Find out more about the Rotolight 6inch Articulated Arm Kit

The Rotolight 6inch Articulated Arm Kit is manufactured from anodised steel and allows you to mount your Rotolight directly to the included clamp which in turn can then be attached to a tube up to 35mm in diameter. This cinematic arm features 1/4" 20 screws, and two fully adjustable 360 degree ballheads, allowing you to mount your accessory in virtually

Special OrderFree delivery available
£95.99

1x Rotolight 6inch Articulated Arm Kit

This item is already in your basket

Rotolight 6inch Articulated Arm Kit

Manfrotto 396AB-3 3-Section Double Arm

Find out more about the Manfrotto 396AB-3 3-Section Double Arm

The Manfrotto 396AB-3 3-Section Double Arm is a lightweight double articulated arm which can be used to support studio equipment weighing up to 4.5kg, at maximum extension. The locking system is simple to operate and adjust and the arm features a 16mm hexagonal/universal spigot on the bottom end and a 16mm spigot 3/8 inch light attachment on the top.

Special OrderFree delivery available
£124.00

1x Manfrotto 396AB-3 3-Section Double Arm

This item is already in your basket

Manfrotto 396AB-3 3-Section Double Arm

Rosco LitePad Swivel Arm
5.0

Find out more about the Rosco LitePad Swivel Arm

The Rosco LitePad Swivel Arm is a ball-and-socket construction that allows for positioning of all LitePads except the 24"x24" model.

Special Order
£31.00

1x Rosco LitePad Swivel Arm

This item is already in your basket

Rosco LitePad Swivel Arm

Dedo 510mm Flexible Stand Extension

Find out more about the Dedo 510mm Flexible Stand Extension

This flexible friend simply pops on top of an existing lighting stand or other 16mm lighting stud, adding both reach and flexibility to the mount; enabling you to better pose a head or reflector.

Special OrderFree delivery available
£62.00

1x Dedo 510mm Flexible Stand Extension

This item is already in your basket

Dedo 510mm Flexible Stand Extension

Dedo Dedoflex Holder

Find out more about the Dedo Dedoflex Holder

A flexible holder which attaches to your Dedo head, for safely securing panel reflectors and diffusers of around 30cm diameter. The flexible nature allows you to pose the light modifier to best illuminate the set.

Special OrderFree delivery available
£58.00

1x Dedo Dedoflex Holder

This item is already in your basket

Dedo Dedoflex Holder