Boom Arms and Supports

86 Matching Products

Interfit Adjustable Reflector Bracket
4.0

Find out more about the Interfit Adjustable Reflector Bracket

This Interfit INT274 adjustable reflector bracket will hold your reflector firmly in place and the swivel joint allows you to precisely position the reflector exactly where you want it. The bracket attaches to any lighting stand (not included) although larger models with a wider leg spread will provide a more stable platform and will support reflectors

In Stock
£28.99

1x Interfit Adjustable Reflector Bracket

This item is already in your basket

Interfit Adjustable Reflector Bracket

Interfit Wall Mounting Kit
4.5

Find out more about the Interfit Wall Mounting Kit

A complete wall mounting kit, the Interfit INT312 is simple to install and it allows you to use full width paper backdrops in the studio (although it is not for use with heavy vinyl rolls). The Interfit Wall mounting kit comprises of a pair of wall brackets, three pairs of paper holders, three sets of plastic colour-coded chains and weights plus four wall

In StockFree delivery available
£61.99

1x Interfit Wall Mounting Kit

This item is already in your basket

Interfit Wall Mounting Kit

Interfit C - Stand Boom Arm 100cm (4ft) with 2 Grip Heads

Find out more about the Interfit C - Stand Boom Arm 100cm (4ft) with 2 Grip Heads

The Interfit C Studio Essentials 4' Boom Arm 100cm (LS305) is designed for use with C-Stands and most other heavy-duty light stands. This boom features 5/8" studs on both ends, with a 1/4"-20 thread on one side, and a 3/8" thread on the other side. Included with the boom arm are two grip heads that are used to secure the boom to the stand and attach additional

In StockFree delivery available
£59.99

1x Interfit C - Stand Boom Arm 100cm (4ft) with 2 Grip Heads

This item is already in your basket

Interfit C - Stand Boom Arm 100cm (4ft) with 2 Grip Heads

Elinchrom RQ Boom Arm

Find out more about the Elinchrom RQ Boom Arm

The Elinchrom RQ Boom Arm is designed primarily for use with the Ranger Quadra heads (other small lightweight heads can also be used). The arm extends from 63cm up to a maximum of 156cm and the rubberised grip means the light can be easily and safely positioned as required particularly when used above the subject. The two sections of the EL-Boom Arm can

In Stock
£38.00

1x Elinchrom RQ Boom Arm

This item is already in your basket

Elinchrom RQ Boom Arm

Manfrotto 143 Magic Arm Kit
5.0

Find out more about the Manfrotto 143 Magic Arm Kit

The Manfrotto 143 Magic Arm is a versatile, aluminium articulating arm which can support up to 3kg and is designed to securely hold various accessories and enable quick positioning of whatever you attach to it (IE. lighting equipment or an additional camera). The arm comes with a central locking lever that can lock all three pivot points. On one end is

In StockSave £23Free delivery available
£145.00RRP £168.95

1x Manfrotto 143 Magic Arm Kit

This item is already in your basket

Manfrotto 143 Magic Arm Kit

Manfrotto MN032B Autopole - Black
5.0

Find out more about the Manfrotto MN032B Autopole - Black

Manfrotto's aluminium Autopole simply clamps between the studio floor and ceiling and extends between 2.1 and 3.7m in height. Pole diameters are 45mm and 40mm.

In StockSave £23
£128.00RRP £151.95

1x Manfrotto MN032B Autopole - Black

This item is already in your basket

Manfrotto MN032B Autopole - Black

Manfrotto 085BS Light Boom
4.0

Find out more about the Manfrotto 085BS Light Boom

The Manfrotto 085BS Boom features a 35mm diameter 3 section boom arm complete with Pivoting Clamp 123, Counter Weight 022, Cine Stand with casters, cable clips and locking key. The maximum load at the full extension of 2.8m is 6kg and the light boom weighs 16.4kg.

In StockSave £52
£429.00RRP £481.95

1x Manfrotto 085BS Light Boom

This item is already in your basket

Manfrotto 085BS Light Boom

Manfrotto 244N Magic Arm
4.5

Find out more about the Manfrotto 244N Magic Arm

The Manfrotto 244N Magic Arm is a versitile variable friction aluminium support arm with a central locking knob. Each end features a Type 17 attachment and the arm can secure loads of up to 3kg.

In StockFree delivery available
£114.00

1x Manfrotto 244N Magic Arm

This item is already in your basket

Manfrotto 244N Magic Arm

Lastolite Universal Bracket for 50 - 120cm Collapsible Reflectors
4.5

Find out more about the Lastolite Universal Bracket for 50 - 120cm Collapsible Reflectors

The Lastolite Universal Bracket is suitable for all Bottletops and Reflectors, allowing for versatile positioning. Simply clamp the reflector in place and attach to a lighting stand or clamp with spigot attachment. Adjustable between 50 and 120cm.

In StockSave £3Free delivery available
£64.00RRP £67.95

1x Lastolite Universal Bracket for 50 - 120cm Collapsible Reflectors

This item is already in your basket

Lastolite Universal Bracket for 50 - 120cm Collapsible Reflectors

Manfrotto 038 Double Super Clamp

Find out more about the Manfrotto 038 Double Super Clamp

The Manfrotto 038 Double Super Clamp consists of two Super Clamps connected at a 90 degree angle to each other. They are ideal for connecting horizontal bars or supports to vertical stands and can be used to clamp onto any tube with a diameter of 12mm to 54mm.

In StockSave £6Free delivery available
£54.00RRP £60.95

1x Manfrotto 038 Double Super Clamp

This item is already in your basket

Manfrotto 038 Double Super Clamp

Manfrotto 24cm Mini Friction Arm
4.0

Find out more about the Manfrotto 24cm Mini Friction Arm

The Mini Friction Arm is a useful, multi-role arm; handy for positioning and securing accessories, cameras, smaller lights and miscellaneous ancillaries. Fully extended length is 24cm and maximum payload is 3kg. Two 1/4 inch and a 3/8nch end adapters are supplied and fitted as standard, and other adapter options are available.

In StockFree delivery available
£79.00

1x Manfrotto 24cm Mini Friction Arm

This item is already in your basket

Manfrotto 24cm Mini Friction Arm

Lastolite Skylite Griphead
5.0

Find out more about the Lastolite Skylite Griphead

The Lastolite Skylite Griphead is designed to allow the Skylite to be attached to lighting stands and tilted as required.

In StockSave £3Free delivery available
£54.00RRP £57.95

1x Lastolite Skylite Griphead

This item is already in your basket

Lastolite Skylite Griphead

Manfrotto 143N Magic Arm without Camera Bracket
5.0

Find out more about the Manfrotto 143N Magic Arm without Camera Bracket

The Manfrotto 143N Magic Arm is a versatile aluminium support arm with a central locking lever. Each end features a Type 17 attachment and the arm can secure loads of up to 3kg.

In StockSave £9Free delivery available
£99.00RRP £108.95

1x Manfrotto 143N Magic Arm without Camera Bracket

This item is already in your basket

Manfrotto 143N Magic Arm without Camera Bracket

Interfit Wall Mounting Boom Arm
5.0

Find out more about the Interfit Wall Mounting Boom Arm

Designed to be fixed to a solid wall, this Interfit INT309 bracket can be used to support both studio lighting and accessories such as reflectors. The arm may be extended from 74cm to 124cm and bear a maximum load of 5kg at full extension. The arm should only be mounted to a solid wall.

Awaiting Stock
£44.99

1x Interfit Wall Mounting Boom Arm

This item is already in your basket

Interfit Wall Mounting Boom Arm

Interfit INT290 Background / Reflector Support Stand
3.5

Find out more about the Interfit INT290 Background / Reflector Support Stand

This reflector stand can be used with 5 in 1 reflectors, collapsible backgrounds, or larger reflectors. It will support round or rectangular reflectors up to 200cm wide. Two special clips grip the rims to enable them to be firmly held in position. Ideal for use with the new Interfit double sided collapsible backgrounds

Awaiting Stock
£39.99

1x Interfit INT290 Background / Reflector Support Stand

This item is already in your basket

Interfit INT290 Background / Reflector Support Stand

Lastolite TriGrip Bracket
4.0

Find out more about the Lastolite TriGrip Bracket

Lastolite's TriGrip reflectors are excellent as they can be held and manoeuvred one handed. But what if you require both hands to operate your camera and don't have the luxury of an assistant to hold the reflector for you? Fear not, for Lastolite's TriGrip Bracket is here to help! The bracket is designed to grip the moulded handle of the TriGrip reflector

Awaiting StockSave £12Free delivery available
£77.00RRP £89.95

1x Lastolite TriGrip Bracket

This item is already in your basket

Lastolite TriGrip Bracket

Manfrotto Micro Arm and Nano Clamp Kit

Find out more about the Manfrotto Micro Arm and Nano Clamp Kit

The Micro Friction Arm is a useful, multi-role arm; handy for positioning and securing accessories, cameras, smaller lights and miscellaneous ancillaries. Fully extended length is 15cm and maximum payload is 3kg. A non-rotating 3/8 inch adapter fitting and Nano clamp are fitted as standard, and a standard 3/8 inch adapter is also included. Other adapter

In StockFree delivery available
£104.00

1x Manfrotto Micro Arm and Nano Clamp Kit

This item is already in your basket

Manfrotto Micro Arm and Nano Clamp Kit

Manfrotto 15cm Micro Friction Arm

Find out more about the Manfrotto 15cm Micro Friction Arm

The Micro Friction Arm is a useful, multi-role arm; handy for positioning and securing accessories, cameras, smaller lights and miscellaneous ancillaries. Fully extended length is 15cm and maximum payload is 3kg. Two 3/8 inch and a ¼ inch end adapters are supplied and fitted as standard, and other adapter options are available.

Awaiting StockSave £4Free delivery available
£67.00RRP £71.95

1x Manfrotto 15cm Micro Friction Arm

This item is already in your basket

Manfrotto 15cm Micro Friction Arm

Manfrotto Wall Mounted Stand Holder for 8 Stands

Find out more about the Manfrotto Wall Mounted Stand Holder for 8 Stands

Keep your studio a little tidier with one of these smart, black steel wall racks for lighting stands. As well as presenting a professional image, a wall rack such as this one will reduce trip hazards and provide you with more working space. The rack holds up to eight lighting stands and is 115cm wide. Distance between fixing holes is 64.4cm and the bar

Special OrderSave £2
£39.95RRP £41.95

1x Manfrotto Wall Mounted Stand Holder for 8 Stands

This item is already in your basket

Manfrotto Wall Mounted Stand Holder for 8 Stands

Calumet Studio Pole

Find out more about the Calumet Studio Pole

The Calumet Studio Pole is a sturdy, fully adjustable pole support system that is ideal for creating a background support or suspending a lighting system. The cam-lever arm provides smooth action while exerting the correct amount of pressure for easy installation. The safety latch auto-engages and assures your equipment is secured properly.

In Stock
£62.00

1x Calumet Studio Pole

This item is already in your basket

Calumet Studio Pole

Manfrotto 085BSL Light Boom without Stand - Black
5.0

Find out more about the Manfrotto 085BSL Light Boom without Stand - Black

This Manfrotto Light Boom 35 Black A25 without Stand is supplied with a counterweight and pivot clamp. The boom itself is of three-section aluminium construction with a 35mm diameter arm tube.

In StockSave £15Free delivery available
£229.00RRP £244.95

1x Manfrotto 085BSL Light Boom without Stand - Black

This item is already in your basket

Manfrotto 085BSL Light Boom without Stand - Black

Manfrotto 143A Magic Arm with Bracket

Find out more about the Manfrotto 143A Magic Arm with Bracket

The Manfrotto 143A Magic Arm is a versatile, aluminium articulating arm which can support up to 3KG and is designed to securely hold various accessories and enable quick positioning of whatever you attach to it (IE. lighting equipment or an additional camera). The arm comes with a central locking lever that can lock all three pivot points. Tge arm has

In StockSave £10Free delivery available
£104.00RRP £114.95

1x Manfrotto 143A Magic Arm with Bracket

This item is already in your basket

Manfrotto 143A Magic Arm with Bracket

Manfrotto 806 Mini Salon 190

Find out more about the Manfrotto 806 Mini Salon 190

The Manfrotto 806 Mini Salon 190 has been designed for 35mm and medium format cameras. The Mini Salon 190 allows working heights from 56cm to 182cm and the counter-balanced column is black anodised aluminium and is mounted on a heavy cast iron base with two pivoting wheels which lock firmly into place with individual wheel locks. The Manfrotto 806 Mini

Special OrderSave £399Free delivery available
£849.00RRP £1,248.95

1x Manfrotto 806 Mini Salon 190

This item is already in your basket

Manfrotto 806 Mini Salon 190

Manfrotto MN032 Autopole Silver
5.0

Find out more about the Manfrotto MN032 Autopole Silver

Manfrotto's Autopole system is a superb background support for hanging up to 3 rolls of paper, and can be used anywhere. The Autopole simply clamps between the studio floor and ceiling, and a pair of Superclamps that hold two Triple Hooks on which 3 rolls of background paper can be hung via 3 Expans. Maximum of 30kg per pole.

In Stock
£144.00

1x Manfrotto MN032 Autopole Silver

This item is already in your basket

Manfrotto MN032 Autopole Silver

Manfrotto 816 Super Salon 280

Find out more about the Manfrotto 816 Super Salon 280

The Manfrotto 816 Super Salon 280 is Manfrotto's top-of the-line stand and brings the ultimate in stability to new heights in your studio. The rugged column is mounted on a heavy-duty cast 'T' base, yet is easy to move around thanks to its smooth-rolling wheels. They can be locked into position with just one step on the single control pedal. The Super Salon

Special OrderSave £191Free delivery available
£3,499.00RRP £3,690.95

1x Manfrotto 816 Super Salon 280

This item is already in your basket

Manfrotto 816 Super Salon 280

Manfrotto 809 Salon 230

Find out more about the Manfrotto 809 Salon 230

The Manfrotto 809 Salon 230 has a 8cm diameter black anodised aluminium column with a working height of 221cm provided with an adjust-able counter-balanced sliding horizontal 80cm crossarm. The camera support platform allows movement in a solid angle of 360°, while large sized wheels in the heavy cast base and single pedal control facilitate easy positioning

Special OrderSave £491Free delivery available
£2,399.00RRP £2,890.95

1x Manfrotto 809 Salon 230

This item is already in your basket

Manfrotto 809 Salon 230

Matthews Lazy Suzy

Find out more about the Matthews Lazy Suzy

The Matthews Lazy Suzy is designed to survive on professional film sets and is hence an extremely hardily engineered piece of kit. The articulated double-swivel mount lets you position the camera within a 55cm diameter without the need to shift the camera platform or tripod.

Special OrderFree delivery available
£3,800.00

1x Matthews Lazy Suzy

This item is already in your basket

Matthews Lazy Suzy

Calumet Boom Arm - Compact

Find out more about the Calumet Boom Arm - Compact

The Calumet Boom Arm – Compact, assembles in less than 5 minutes and feature the same sleek counterweight design as its larger sibling with the exception of the angle indicator. The boom measures 132cm with a reach of 81cm and disassembles down to 97cm.It includes one 5.6Kg shot counterweight bag. Mounts to any Cine stand with 1.125 Inch female mount.

In StockFree delivery available
£104.00

1x Calumet Boom Arm - Compact

This item is already in your basket

Calumet Boom Arm - Compact

California Sunbounce Boom Stick for Pro and Big

Find out more about the California Sunbounce Boom Stick for Pro and Big

The California Sunbounce Boom Stick for Pro and Big is a 3 section boom pole for use with the Pro and Big frames and has a maximum working length of approx 3.9m and closed length of 1.1m. It can also be used as an extending boom arm for use with small flash heads.

In StockSave £20Free delivery available
£99.99RRP £119.99

1x California Sunbounce Boom Stick for Pro and Big

This item is already in your basket

California Sunbounce Boom Stick for Pro and Big

Manfrotto 425B Mega Boom Arm

Find out more about the Manfrotto 425B Mega Boom Arm

This is the largest boom manufacturered by Manfrotto. Movement - including pan, tilt, rotation, and telescopic extension of the boom arm - is controlled by smooth-operating geared crank handles. Fully folded length is 2.2m, with the boom extending a minimum of 50cm past the stand attachment and a maximum of 3.2m past the stand attachment. Supplied with

Special OrderSave £95Free delivery available
£1,080.00RRP £1,175.95

1x Manfrotto 425B Mega Boom Arm

This item is already in your basket

Manfrotto 425B Mega Boom Arm

Manfrotto Micro Arm with 3/8 Anti-Rotation Fittings

Find out more about the Manfrotto Micro Arm with 3/8 Anti-Rotation Fittings

The Micro Friction Arm is a useful, multi-role arm; handy for positioning and securing accessories, cameras, smaller lights and miscellaneous ancillaries. Fully extended length is 15cm and maximum payload is 3kg. Two 3/8 inch anti-rotation attachments are supplied and fitted as standard, along with a spare standard 3/8 inch adapter. Other optional adapters

Special OrderSave £4Free delivery available
£79.00RRP £83.95

1x Manfrotto Micro Arm with 3/8 Anti-Rotation Fittings

This item is already in your basket

Manfrotto Micro Arm with 3/8 Anti-Rotation Fittings

Manfrotto MN098B Wall Boom

Find out more about the Manfrotto MN098B Wall Boom

Wall mounted boom arm with two sections (Diameter: 35 and 29mm). Rotates 160° vertically and 180° horizontally. Attachment via a 5/8" female socket and 5/8" double ended stud. Maximum load at full extension is 4.5kg.

In StockSave £49Free delivery available
£135.00RRP £184.95

1x Manfrotto MN098B Wall Boom

This item is already in your basket

Manfrotto MN098B Wall Boom

Manfrotto MN124 Pivoting Boom Clamp

Find out more about the Manfrotto MN124 Pivoting Boom Clamp

Pivoting clamp for 19, 20, 25 and 28mm diameter boom shafts. Fits on light stands of the same diameter.

Special OrderSave £5Free delivery available
£54.00RRP £59.95

1x Manfrotto MN124 Pivoting Boom Clamp

This item is already in your basket

Manfrotto MN124 Pivoting Boom Clamp

Manfrotto 386B Nano Clamp

Find out more about the Manfrotto 386B Nano Clamp

The Manfrotto 386B Nano Clamp is a smaller version of the popular Super Clamp. The 386B Nano clamp features a high friction tape which improves the grip, a high performance aluminium pull and lock aluminium handle, a unique surface design that was tested on the smallest surface enabling it to grip round or flat tube/pole surfaces. The flexibility given

In Stock
£42.95

1x Manfrotto 386B Nano Clamp

This item is already in your basket

Manfrotto 386B Nano Clamp

Matthews Mini Max Boom

Find out more about the Matthews Mini Max Boom

A compact variant of the Max Boom, the Mini Max has a remarkably small footprint combined with an impressive reach. Mini Max is capable of supporting up to 11.3kg, operating on a 265cm maximum arc from 489cm high to 92cm below horizontal.

Special OrderFree delivery available
£1,780.00

1x Matthews Mini Max Boom

This item is already in your basket

Matthews Mini Max Boom

LuxS Wall Scissor Boom

Find out more about the LuxS Wall Scissor Boom

Smart and ergonomic, this wall scissor boom will increase the floor-space and decrease the clutter in your studio; giving you more room in which to work, decreasing trip hazards, removing the risk of tiny hands pulling over lighting stands, and presenting a more professional working area to clients. A mounted head may be stowed close to the wall and freely

Special OrderSave £10Free delivery available
£129.99Was £140.00

1x LuxS Wall Scissor Boom

This item is already in your basket

LuxS Wall Scissor Boom

California Sunbounce Griphead Enterprise
5.0

Find out more about the California Sunbounce Griphead Enterprise

The California Sunbounce Enterprise Grip Head offers an ideal way to mount all sizes (except 20 x 20 inch Sun-Scrim) of Sunbounce frames to a light-stand. The grip head's tunnel clamps are two different sizes to accommodate the two sizes of tubing used by California Sunbounce. It has a 5/8 inch (16 mm) receiver for standard light-stand stud mounts.

In StockSave £15Free delivery available
£69.00RRP £84.99

1x California Sunbounce Griphead Enterprise

This item is already in your basket

California Sunbounce Griphead Enterprise

Manfrotto 098SHB Short Wall Boom

Find out more about the Manfrotto 098SHB Short Wall Boom

This lighting boom is designed to attach to a wall and folds neaty against the wall when not in use. There are two telescoping sections with a 180° horizontal and 160° vertical range of motion, extending a maximum of 1.22m. Lighting kit is affixed via a 5/8 inch socket and double ended 1/4 inch and 3/8 inch stud.

Special OrderFree delivery available
£164.00

1x Manfrotto 098SHB Short Wall Boom

This item is already in your basket

Manfrotto 098SHB Short Wall Boom

Manfrotto 076B Autopole - Black

Find out more about the Manfrotto 076B Autopole - Black

Manfrotto's aluminium Autopole simply clamps between the studio floor and ceiling. This shorter model extends between 1.5 and 2.7m in height. Pole diameters are 45mm and 40mm.

Special OrderFree delivery available
£139.00

1x Manfrotto 076B Autopole - Black

This item is already in your basket

Manfrotto 076B Autopole - Black

Manfrotto 033B 2m Autopole Extension Bar

Find out more about the Manfrotto 033B 2m Autopole Extension Bar

The Manfrotto 033B Autopole Extension Bar is a 40mm diameter bar designed to either be used in conjunction with a Super Clamp or similar clamp as a crossbar or to extend your Autopole by 2m.

Awaiting StockSave £2
£49.00RRP £51.95

1x Manfrotto 033B 2m Autopole Extension Bar

This item is already in your basket

Manfrotto 033B 2m Autopole Extension Bar

Manfrotto 032BASEB Stand for Autopole - Black

Find out more about the Manfrotto 032BASEB Stand for Autopole - Black

The Manfrotto 032BASEB is a tripod base for use with Manfrotto Autopoles, allowing you to use your Autopole on location or where the ceilings are particularly high. The legs have a spread of 130cm, providing a stable base platform.

In StockSave £4Free delivery available
£74.00RRP £78.95

1x Manfrotto 032BASEB Stand for Autopole - Black

This item is already in your basket

Manfrotto 032BASEB Stand for Autopole - Black

Manfrotto 396B-3 3-Section Double Arm with Camera Bracket

Find out more about the Manfrotto 396B-3 3-Section Double Arm with Camera Bracket

The Manfrotto 396B-3 3-Section Double Arm is a lightweight double articulated arm which can be used to support studio equipment weighing up to 4.5kg, at maximum extension. The locking system is simple to operate and adjust and the arm features a 16mm hexagonal/universal spigot on the bottom end and a 16mm spigot 3/8 inch light attachment on the top which

Special OrderFree delivery available
£134.00

1x Manfrotto 396B-3 3-Section Double Arm with Camera Bracket

This item is already in your basket

Manfrotto 396B-3 3-Section Double Arm with Camera Bracket

Manfrotto 170 Mini Floor to Ceiling Pole

Find out more about the Manfrotto 170 Mini Floor to Ceiling Pole

The Manfrotto 170 Mini Floor to Ceiling Pole is a spring-loaded pole which extends between 175cm and 330cm.

Special OrderSave £4
£59.00RRP £63.95

1x Manfrotto 170 Mini Floor to Ceiling Pole

This item is already in your basket

Manfrotto 170 Mini Floor to Ceiling Pole

Rotolight 10inch Articulated Arm Kit
4.0

Find out more about the Rotolight 10inch Articulated Arm Kit

The Rotolight 10inch Articulated Arm Kit is manufactured from anodised steel and allows you to mount your Rotolight directly to the included clamp which in turn can then be attached to a tube up to 35mm in diameter. This cinematic arm features 1/4" 20 screws, and two fully adjustable 360 degree ballheads, allowing you to mount your accessory in virtually

Special OrderFree delivery available
£107.00

1x Rotolight 10inch Articulated Arm Kit

This item is already in your basket

Rotolight 10inch Articulated Arm Kit

Matthews Mini  Boom

Find out more about the Matthews Mini Boom

Steel-constructed for extra strength and rigidity, the Matthews Mini Boom extends from 115cm to 203cm and mounts on a standard 5/8 inch lighting stand. The boom-end terminated with a 5/8 inch lighting stud at one end, and a hook for ballast at the other.

In StockFree delivery available
£189.00

1x Matthews Mini Boom

This item is already in your basket

Matthews Mini Boom

Limelite Mosaic Panel Mounting Kit - 2x1

Find out more about the Limelite Mosaic Panel Mounting Kit - 2x1

The Limelite Mosaic 2x1 Panel Mounting Kit allows two Mosaic LED panels to be mounted side by side onto a single medium/heavy-duty lighting stand. It includes a wide mounting stirrup with full swivel and tilt for stand/HiGlide mounting and is cabled to allow both Mosaic panels to be simultaneously controlled from either panel via their on-board DMX in/out

In StockSave £60
£19.00Was £79.00

1x Limelite Mosaic Panel Mounting Kit - 2x1

This item is already in your basket

Limelite Mosaic Panel Mounting Kit - 2x1

Manfrotto 024B Black Light Boom

Find out more about the Manfrotto 024B Black Light Boom

The Manfrotto 024B Black Light Boom attaches to light stands with diameters of 19, 20, 25 or 28mm. It has three sections - the slimmest of which is 25mm in diameter - and includes a Manfrotto 124 Pivot Clamp, counter-weight, cable clips and locking key.

Special OrderFree delivery available
£164.00

1x Manfrotto 024B Black Light Boom

This item is already in your basket

Manfrotto 024B Black Light Boom

Rotolight Anova Double Yoke

Find out more about the Rotolight Anova Double Yoke

The Rotolight Double Yoke will allow you to mount two Anova lights to one lighting stand (not included). It comes complete with a T connector plate and mounting plate.

In StockSave £10Free delivery available
£95.00Was £105.00

1x Rotolight Anova Double Yoke

This item is already in your basket

Rotolight Anova Double Yoke

Rosco LitePad Axiom Wall Plate Bracket

Find out more about the Rosco LitePad Axiom Wall Plate Bracket

The Rosco LitePad Axiom Wall Plate Bracket has a wall plate which allows a LitePad to be attached or screwed onto almost any surface. The maximum load capacity is 20lbs.

In StockSave £12
£23.00Was £35.00

1x Rosco LitePad Axiom Wall Plate Bracket

This item is already in your basket

Rosco LitePad Axiom Wall Plate Bracket

Matthews 100cm Hollywood Arm with Grip Head

Find out more about the Matthews 100cm Hollywood Arm with Grip Head

For rock-steady stability and peace of mind, these solid stainless steel, industry standard arms and grip heads are hard to beat. Both the arm and the 64mm grip head are equipped with 9.5mm (3/8) and 16mm (5/8) holes.

In StockFree delivery available
£84.00

1x Matthews 100cm Hollywood Arm with Grip Head

This item is already in your basket

Matthews 100cm Hollywood Arm with Grip Head

Manfrotto Dado - 6 Rods
4.0

Find out more about the Manfrotto Dado - 6 Rods

The Manfrotto Dado is a universal junction that can be used to connect every kind of device from monitors to cameras, and from lights to supports. You can create your own professional set up in the most intuitive way. It is designed to be a small, versatile and sturdy solution that provides a multiple attachment point for lights, cameras and accessories

Special OrderFree delivery available
£94.00

1x Manfrotto Dado - 6 Rods

This item is already in your basket

Manfrotto Dado - 6 Rods

Matthews Monitor Mount

Find out more about the Matthews Monitor Mount

This monitor mount allows you to attach a monitor to a standard lighting stand, or other mount with a 5/8 inch spigot. The aluminium mounting bracket features adjustable pan and ±45° tilt , so you can better position the monitor. Maximum payload is a whopping 30kg

Awaiting StockFree delivery available
£200.00

1x Matthews Monitor Mount

This item is already in your basket

Matthews Monitor Mount

Calumet Boom Arm - Standard

Find out more about the Calumet Boom Arm - Standard

The Calumet Boom Arm – Standard, assembles in less than 5 minutes and features an angle indicator that rotates the head 360 degrees on its arm. The boom measures 290cm with a reach of 180cm. A unique double-beam parallelogram design maintains the angle of light as you move it up and down.It includes two 5.6Kg shot counterweight bag. Mounts to any Cine stand

Awaiting StockFree delivery available
£285.00

1x Calumet Boom Arm - Standard

This item is already in your basket

Calumet Boom Arm - Standard

Manfrotto 396B-2 2-Section Double Arm with Camera Bracket

Find out more about the Manfrotto 396B-2 2-Section Double Arm with Camera Bracket

The Manfrotto 396B-3 2-Section Double Arm is a lightweight double articulated arm which can be used to support studio equipment weighing up to 5kg at maximum extension. The locking system is simple to operate and adjust. The arm features a 16mm hexagonal/universal spigot on the bottom end and a 16mm spigot 3/8 inch light attachment on the top, which attaches

Special OrderFree delivery available
£109.00

1x Manfrotto 396B-2 2-Section Double Arm with Camera Bracket

This item is already in your basket

Manfrotto 396B-2 2-Section Double Arm with Camera Bracket

Manfrotto 231ARM Sliding Support Arm

Find out more about the Manfrotto 231ARM Sliding Support Arm

This quick-realease support arm is for attaching lighting fixtures to a Manfrotto 231 or 231CS column stand, or any other 9.5mm pole. The hand grip release allows the height to be easily adjusted. It is equipped with a stadnard lighting spigot.

Special OrderSave £2
£44.00RRP £46.95

1x Manfrotto 231ARM Sliding Support Arm

This item is already in your basket

Manfrotto 231ARM Sliding Support Arm

Rotolight AEOS Yoke

Find out more about the Rotolight AEOS Yoke

A yoke for the Rotolight AEOS LED light which enables the AEOS to be mounted in a traditional method, for C stand, or studio operation. Includes mounting knobs.

Special OrderFree delivery available
£74.99

1x Rotolight AEOS Yoke

This item is already in your basket

Rotolight AEOS Yoke

Rotolight 6inch Articulated Arm Kit

Find out more about the Rotolight 6inch Articulated Arm Kit

The Rotolight 6inch Articulated Arm Kit is manufactured from anodised steel and allows you to mount your Rotolight directly to the included clamp which in turn can then be attached to a tube up to 35mm in diameter. This cinematic arm features 1/4" 20 screws, and two fully adjustable 360 degree ballheads, allowing you to mount your accessory in virtually

Special OrderFree delivery available
£95.99

1x Rotolight 6inch Articulated Arm Kit

This item is already in your basket

Rotolight 6inch Articulated Arm Kit

Manfrotto 396AB-3 3-Section Double Arm

Find out more about the Manfrotto 396AB-3 3-Section Double Arm

The Manfrotto 396AB-3 3-Section Double Arm is a lightweight double articulated arm which can be used to support studio equipment weighing up to 4.5kg, at maximum extension. The locking system is simple to operate and adjust and the arm features a 16mm hexagonal/universal spigot on the bottom end and a 16mm spigot 3/8 inch light attachment on the top.

Special OrderFree delivery available
£124.00

1x Manfrotto 396AB-3 3-Section Double Arm

This item is already in your basket

Manfrotto 396AB-3 3-Section Double Arm

Rosco LitePad Swivel Arm
5.0

Find out more about the Rosco LitePad Swivel Arm

The Rosco LitePad Swivel Arm is a ball-and-socket construction that allows for positioning of all LitePads except the 24"x24" model.

Special Order
£31.00

1x Rosco LitePad Swivel Arm

This item is already in your basket

Rosco LitePad Swivel Arm

Dedo 510mm Flexible Stand Extension

Find out more about the Dedo 510mm Flexible Stand Extension

This flexible friend simply pops on top of an existing lighting stand or other 16mm lighting stud, adding both reach and flexibility to the mount; enabling you to better pose a head or reflector.

Special OrderFree delivery available
£62.00

1x Dedo 510mm Flexible Stand Extension

This item is already in your basket

Dedo 510mm Flexible Stand Extension

Dedo Dedoflex Holder

Find out more about the Dedo Dedoflex Holder

A flexible holder which attaches to your Dedo head, for safely securing panel reflectors and diffusers of around 30cm diameter. The flexible nature allows you to pose the light modifier to best illuminate the set.

Special OrderFree delivery available
£58.00

1x Dedo Dedoflex Holder

This item is already in your basket

Dedo Dedoflex Holder

Manfrotto 241S Pump Cup with 5/8 inch Socket

Find out more about the Manfrotto 241S Pump Cup with 5/8 inch Socket

The Manfrotto 241S is a 15cm diameter suction cup which will securely attach to almost any flat surface and may be used to mount lighting heads or other accessories weighing up to 2kg via a 5/8 inch (16mm) socket. The mounting socket features a safety pin for added security.

Special OrderSave £3Free delivery available
£74.00RRP £77.95

1x Manfrotto 241S Pump Cup with 5/8 inch Socket

This item is already in your basket

Manfrotto 241S Pump Cup with 5/8 inch Socket

Manfrotto Dado - 3 Rods

Find out more about the Manfrotto Dado - 3 Rods

The Manfrotto Dado is a universal junction that can be used to connect every kind of device from monitors to cameras, and from lights to supports. You can create your own professional set up in the most intuitive way. It is designed to be a small, versatile and sturdy solution that provides a multiple attachment point for lights, cameras and accessories

Special OrderSave £5
£49.00RRP £54.95

1x Manfrotto Dado - 3 Rods

This item is already in your basket

Manfrotto Dado - 3 Rods

Manfrotto 032BASE Stand for Autopole - Silver

Find out more about the Manfrotto 032BASE Stand for Autopole - Silver

The Manfrotto 032BASEB is a tripod base for use with Manfrotto Autopoles, allowing you to use your autopole on location or where the ceilings are particularly high. The legs have a spread of 130cm, providing a stable base platform.

Special OrderSave £4Free delivery available
£74.00RRP £78.95

1x Manfrotto 032BASE Stand for Autopole - Silver

This item is already in your basket

Manfrotto 032BASE Stand for Autopole - Silver

Matthews NOGA Arm - Medium

Find out more about the Matthews NOGA Arm - Medium

Sporting a 16mm spigot at each end, the NOGA Arm is a handy and flexible support arm, with a maximum extension of 26.6cm and a maximum load of 6kg when fully extended.

Special OrderFree delivery available
£166.00

1x Matthews NOGA Arm - Medium

This item is already in your basket

Matthews NOGA Arm - Medium

Matthews MiniGrip Mounting Kit

Find out more about the Matthews MiniGrip Mounting Kit

Comprising of four 5cm MiniGrip heads (equipped with 3/8 and 5/8 mounting holes), two 50cm (20 inch) arms, a pair of mini Matthellini clamps and a small kit-bag, this kit is used for mounting camera and lighting equipment for specific, custom applications. The size of the kit makes it particularly useful when rigging gear in confined areas, or for small-scale

Special OrderFree delivery available
£310.00

1x Matthews MiniGrip Mounting Kit

This item is already in your basket

Matthews MiniGrip Mounting Kit

Rotolight 6inch Articulated Arm with Ballhead and Shoe Adaptor

Find out more about the Rotolight 6inch Articulated Arm with Ballhead and Shoe Adaptor

The Rotolight 6inch Articulated Arm with Ballhead and Shoe Adaptor is manufactured from anodised steel and allows you to mount your Rotolight, monitor or other accessory to camera shoe, RL48-Superclamp or Rail Support Bridge. This cinematic arm features 1/4" 20 screws, and two fully adjustable 360 degree ballheads, allowing you to mount your accessory in

Special OrderFree delivery available
£71.99

1x Rotolight 6inch Articulated Arm with Ballhead and Shoe Adaptor

This item is already in your basket

Rotolight 6inch Articulated Arm with Ballhead and Shoe Adaptor

Manfrotto 800 Mini Static

Find out more about the Manfrotto 800 Mini Static

The Manfrotto 800 Mini Static is sturdy, compact, and surprisingly affordable. The versatile Mini Static can handle cameras from 35mm to 4x5” formats and is ideal for I.D., passport and portraiture work . The pneumatically damped black anodised aluminium column extends from a minimum of 92cm to a height of 162cm and a 3/8” male thread on column top allows

Special OrderSave £245Free delivery available
£699.00RRP £944.95

1x Manfrotto 800 Mini Static

This item is already in your basket

Manfrotto 800 Mini Static

Rotolight 10inch Articulated Arm with Ballhead and Shoe Adaptor

Find out more about the Rotolight 10inch Articulated Arm with Ballhead and Shoe Adaptor

The Rotolight 10inch Articulated Arm with Ballhead and Shoe Adaptor is manufactured from anodised steel and allows you to mount your Rotolight, monitor or other accessory to camera shoe, RL48-Superclamp or Rail Support Bridge. This cinematic arm features 1/4" 20 screws, and two fully adjustable 360 degree ballheads, allowing you to mount your accessory

Special OrderFree delivery available
£83.99

1x Rotolight 10inch Articulated Arm with Ballhead and Shoe Adaptor

This item is already in your basket

Rotolight 10inch Articulated Arm with Ballhead and Shoe Adaptor

Manfrotto 432-3.7 Autopole - Silver

Find out more about the Manfrotto 432-3.7 Autopole - Silver

Manfrotto's aluminium Autopole simply clamps between the studio floor and ceiling. This particular model extends between 2.1 and 3.7m in height. Pole diameters are 45mm and 40mm.

Special OrderFree delivery available
£159.00

1x Manfrotto 432-3.7 Autopole - Silver

This item is already in your basket

Manfrotto 432-3.7 Autopole - Silver

Matthews Hollywood Beefy Baby with Triple Riser

Find out more about the Matthews Hollywood Beefy Baby with Triple Riser

A premier lighting stand for professional studio use, the Beefy Baby uses steel legs and a steel top riser with the baby pin welded in place rather than pinned, in order to increase strength and longevity. The independently extending ‘Rocky Mountain Leg' enables the levelling of the stand on awkward terrain.

Special OrderFree delivery available
£204.00

1x Matthews Hollywood Beefy Baby with Triple Riser

This item is already in your basket

Matthews Hollywood Beefy Baby with Triple Riser

Rosco LitePad Loop Light Stand Plate

Find out more about the Rosco LitePad Loop Light Stand Plate

This accessory allows for the LitePad Loop to attach to the LitePad Swivel Arm and then to a light stand (both sold separately). The magnets on the Loop attach to the Light Stand Plate and then the 1/4 - 20 Bolt on the back attaches to the Swivel Arm.

Special Order
£9.00

1x Rosco LitePad Loop Light Stand Plate

This item is already in your basket

Rosco LitePad Loop Light Stand Plate

Matthews Hollywood 64mm Grip Head

Find out more about the Matthews Hollywood 64mm Grip Head

For kit too valuable to let slip, Matthews grip heads can't be beat. Enormously strong and utilised by many Hollywood film studios, these 64mm (2.5 inch) solid metal grip heads possess both 9.5mm (3/8) and 16mm (5/8) holes.

Awaiting Stock
£34.00

1x Matthews Hollywood 64mm Grip Head

This item is already in your basket

Matthews Hollywood 64mm Grip Head

Dedo Dedolight Clamp

Find out more about the Dedo Dedolight Clamp

This handy clamp secures to shelves, poles, doorframes and more. It features a small shaft which locks in two positions and terminates in a standard lighting stud, enabling you to mount lighting heads or accessories almost anywhere! The clamp has a maximum span of 4.8cm.

Special Order
£43.00

1x Dedo Dedolight Clamp

This item is already in your basket

Dedo Dedolight Clamp

Matthews Matthellini Clamp with 5cm End Jaw

Find out more about the Matthews Matthellini Clamp with 5cm End Jaw

An invaluable multi-role clamp for both professional and amateur riggers and lighting techs. The Matthellini secures to almost anything - from tubes to tables - and this 5cm (2 inch) model features a fixed end jaw portion and a 16mm spigot, for attachment of lighting heads and accessories.

Awaiting StockFree delivery available
£59.00

1x Matthews Matthellini Clamp with 5cm End Jaw

This item is already in your basket

Matthews Matthellini Clamp with 5cm End Jaw

Matthews Pro Car Mount System

Find out more about the Matthews Pro Car Mount System

This kit will add a myriad of automotive mounting possibilities to your repertoire – without scratching the paintwork! The camera – of up to 12kg - is mounted on the included ball head and attached to a vehicle with any combination of the three suction cups and array of grips heads, adapters and rods supplied in the kit.

Special OrderFree delivery available
£640.00

1x Matthews Pro Car Mount System

This item is already in your basket

Matthews Pro Car Mount System

Rosco LitePad 76mm Mounting Bracket

Find out more about the Rosco LitePad 76mm Mounting Bracket

The Rosco LitePad 76mm Mounting Bracket will hold any 3" Circle, 3"x3", 3"x6" and 3"x12" LitePad HO+ and with the rear DL. A 1/4 inch bolt you can also attach it to other objects such as a stand for greater flexibility.

Special Order
£22.15

1x Rosco LitePad 76mm Mounting Bracket

This item is already in your basket

Rosco LitePad 76mm Mounting Bracket

Rosco LitePad 152mm Mounting Bracket

Find out more about the Rosco LitePad 152mm Mounting Bracket

The Rosco LitePad 152mm Mounting Bracket will hold any 3"x6" or 6"x6" LitePad HO+ and with the rear DL. A 1/4" bolt you can also attach it to other objects such as a stand for greater flexibility.

Special Order
£31.00

1x Rosco LitePad 152mm Mounting Bracket

This item is already in your basket

Rosco LitePad 152mm Mounting Bracket

Rosco LitePad 305mm Mounting Bracket

Find out more about the Rosco LitePad 305mm Mounting Bracket

The Rosco LitePad 305mm Mounting Bracket will hold any 6"x12", 12"x12" or 12" Circle LitePad HO+ and using the rear DL. A 1/4" bolt you can also attach it to other objects such as a stand for greater flexibility.

Special Order
£39.00

1x Rosco LitePad 305mm Mounting Bracket

This item is already in your basket

Rosco LitePad 305mm Mounting Bracket

Rosco LitePad 610mm Mounting Bracket

Find out more about the Rosco LitePad 610mm Mounting Bracket

The Rosco LitePad 610mm Mounting Bracket will hold any 24"x24" LitePad HO+ and using the rear DL. A 1/4" bolt you can also attach it to other objects such as a stand for greater flexibility.

Special OrderFree delivery available
£70.00

1x Rosco LitePad 610mm Mounting Bracket

This item is already in your basket

Rosco LitePad 610mm Mounting Bracket

Matthews Hollywood Head 115mm Grip Head

Find out more about the Matthews Hollywood Head 115mm Grip Head

For kit too valuable to let slip, Matthews grip heads can't be beat. Enormously strong and utilised by many Hollywood film studios, these 115mm (4.5 inch) solid metal grip heads possess both 9.5mm (3/8) and 16mm (5/8) holes and a 16mm Junior pin.

Special OrderFree delivery available
£109.00

1x Matthews Hollywood Head 115mm Grip Head

This item is already in your basket

Matthews Hollywood Head 115mm Grip Head

Matthews Extendellini

Find out more about the Matthews Extendellini

The Matthews Extendellini is a 30cm (12 inch) extension, for use with the Matthellini and Cardellini centre-jaw clamps. Simply remove the jaw, handle and bushing from your existing Matthellini or Cardellini and attach to the Exender for a much wider grip range. Constructed of chrome-plated steel, for strength and durability. Pictured clamps and grips not

Special Order
£25.00

1x Matthews Extendellini

This item is already in your basket

Matthews Extendellini

Matthews Hollywood Beefy Baby with Double Riser

Find out more about the Matthews Hollywood Beefy Baby with Double Riser

A premier lighting stand for professional studio use, the Beefy Baby uses steel legs and a steel top riser with the baby pin welded in place rather than pinned, in order to increase strength and longevity. The independently extending ‘Rocky Mountain Leg' enables the levelling of the stand on awkward terrain.

Special OrderFree delivery available
£182.00

1x Matthews Hollywood Beefy Baby with Double Riser

This item is already in your basket

Matthews Hollywood Beefy Baby with Double Riser

Matthews Heavy Duty Baby Side Arm

Find out more about the Matthews Heavy Duty Baby Side Arm

Clamping to any narrow pole, riser or lighting stand, this heavy duty steel side-arm can be used for attaching additional heads or accessories. The Baby Side Arm terminates in a double 5/8 inch (16mm) spigot.

Special OrderFree delivery available
£113.00

1x Matthews Heavy Duty Baby Side Arm

This item is already in your basket

Matthews Heavy Duty Baby Side Arm

Matthews Master Mount System

Find out more about the Matthews Master Mount System

The go-to system when rigging vehicles for film photography, the Master Mount System contains an array of grip heads, rods and suction mounts; allowing you to securely mount a camera pretty much anywhere! Demonstration DVD and carry-bag included.

Special OrderFree delivery available
£829.00

1x Matthews Master Mount System

This item is already in your basket

Matthews Master Mount System

Matthews Baby Grid Clamp with16mm Spigot

Find out more about the Matthews Baby Grid Clamp with16mm Spigot

For securing lights and accessories equipped with a 16mm lighting socket to tubes, railes, pipes and overhead grids.Clamps to pipes with a tube diameter of between 3.2 and 3.8cm.

Special OrderFree delivery available
£59.00

1x Matthews Baby Grid Clamp with16mm Spigot

This item is already in your basket

Matthews Baby Grid Clamp with16mm Spigot