Cactus RF60X Wireless Flash

The Cactus RF60X is a portable flashgun with a built-in wireless commander, receiver, and slave. It is able to control other flashguns as well as be controlled by the Cactus V6, V6II, and V6 IIs transceivers. Easy to use, it has maximum guide number of 56, and an innovative design that features a cooling mode to prevent overheat cut-off, an autofocus assist light, and a simple menu system.

Key Features: Cactus RF60X Wireless Flash

• Exclusive: cooling mode to prevent RF60X from overheat cut-off
• Quick full-power recharge time at 1.9 seconds
• Auto-focus assist light in sync with other Cactus devices
• Automatic wireless HSS support in Slave mode for Canon, Fujifilm, Nikon, Olympus, Panasonic, Pentax when working with V6 II; and Sony with V6 IIs transceiver
• Built-in wireless commander and slave - runs on 16 channels
• Remote control of power and zoom level - the power is adjustable from 1/128 to 1/1 full power in steps of 0.3EV and the zoom can be controlled from a from wide 24mm to tele 105mm
• Normal HSS and Power Sync support - RF60 (firmware 200 or above) supports High-speed sync (HSS) / Focal Plane (FP) mode when triggered by a Cactus V6 II / V6 IIs
• Group control of up to four groups - with configurable Group Alias
• Optical slave - captures pre-flash or main flash signals for flash triggering
• Delay mode - configurable from 1 to 99 seconds, or 1 to 999ms
• Maximum guide number of 56 - the Fresnel lens was specifically designed to give out the best possible light
• Compatible with Cactus transceiver - including Cactus V6, V6II and V6 IIs
• Multi-flash - a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame
• Mini-USB port - for firmware update