Flash Battery Packs and Cables
Any photographer making use of flash extensively should consider the Canon CP-E4N Compact Battery Pack. With eight AA batteries, it will help the flash to recharge even quicker and will give you more flashes between battery changes.
This battery holder enables you to power your Metz 45 CL/CT 1, 3, 4, 5 or 45 CL-4 Digital flashgun via six AA batteries, instead of the normal battery pack. Handy in a pinch when you're low on power! Note that rechargable AA NiMh and NiCd are not suitable for use with the holder.
Designed primarily for use with the Quantum T3 battery utilising the locking connection (although it can also be used with other Quantum batteries) the CZ2 coiled cable connects to Canon flashguns 430EZ, 480G, 540EZ, 550EX, 580EX and 580EX II.
Designed for use with the Nikon SB-900 flashgun the SD-9 is a high capacity external battery pack which can be used with either 4 or 8 AA batteries. It increases both the number of flashes and the recycling time of the unit (to as little as 1 second). Note batteries must be in place in the flashgun for the unit to function.
This cable is used to connect most Canon flashguns to an Interfit ProFlash battery pack.
The SD-800 adds a fifth AA battery to the SB-800 flash system. The flashgun is designed to operate upon 6 volts of power, which is the output of 4 alkaline batteries. NiMh batteries, however, have a lower specified voltage which ideally requires 5 units to deliver ideal voltage to the flashgun.
Designed primarily for use with the Quantum T3 battery utilising the locking connection (although it can also be used with other Quantum batteries), the CKE2 coiled cable connects to Nikon flashguns SB28, SB80, SB800 and SB900.
If you struggle for flash power on long or intensive shoots, then the Nissin PS 8 Power Pack is a wise investment, enabling high-speed flash charging and greatly increased longevity in the field. Lightweight and comfortable to carry the PS 8 houses a quick-change battery pack with two outlets; allowing the running of two flashguns simultaneously. The design
Flash extension cords for connecting flash equipment. With right-angle plug and PC socket.
The Metz 45-56 NiMH rechargeable battery pack is designed for use in the Metz 45 CL/CT-1,3 and 4 and 45 CT-5 hammerhead flash units. The NiMh technology means that there is no need to fully discharge the battery before recharging it.
Quantum QF51 Male / Female Extension Cable. 6m (19.5 foot) length. To extend QF21, QF50, QF52, QF53, or TTL adapters. Maximum control length possible is 30m (100 feet), using 5 QF51 cables.
This set consists of a 45-57 type NiMH battery plus aninternational charger for the Metz 45 CL 4 Digital, 45 CL/CT 1, 3, 4 and 5. The set can be used to upgrade older 45CL series guns.