Flash Heads and Kits
The PocketWizard CM-N3-ACC Remote Cable is for remotely triggering the electronic shutter release of Canon cameras equipped with a N3 Remote Terminal. It is required for remote camera triggering with a FlexTT5 trigger if using E-TTL functions. In addition, the PocketWizard CM-N3-ACC cable contains a pre-trigger connection. When a remote zone is enabled
The PocketWizard N10-ACC-1 Remote Accessory cable is a 30cm cable for connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Nikon 10-Pin Remote Shutter Terminal remote terminal and acting as a pre-trigger cable. A Pre-Trigger cable controls both the half-press and full-press function of your camera's shutter release. When a camera is 'pre-triggered',
The Air Remote TTL-N is designed to wirelessly and painlessly integrate your Profoto B1 and B2 lights with your Nikon camera and operate lights from up to 300m away. Simply attach the module to the hotshoe and set for either automatic TTL mode or Manual mode and you'll be good to go. TTL mode is ideal when you just need a simple point-and-shoot set-up,
The Interfit F121 200 W studio flash light features a digital touchscreen for accurate power adjustments with step-less dimming and accurate colour temperature. It is suitable for both professionals and hobbyists wishing to purchase quality studio lighting equipment at affordable prices.
Spare or replacement Elinchrom 300 watt modelling lamp with a GX 6.35 base fitting.
The Interfit INT411 is an infrared flash trigger unit which sits on the camera hotshoe. The wide angle IR beam will trigger IR sensitive flash units when the shutter is released, removing the need for a physical sync cord; resulting in less studio clutter. Although suitable for use with most cameras, it is not suitable for use on Sony and Minolta hotshoes.
The PocketWizard N10-ACC (previously N90M-ACC-ND) Remote Cable is for remotely triggering the electronic shutter release of Nikon DSLR's cameras equipped with a 10 pin Remote Terminal. It is required for remote camera triggering with a MultiMax with ACC port or FlexTT5 trigger (not PlusII), if using TTL functions. In addition, the PocketWizard N10-ACC cable
This is a spare or replacement flashtube for the Profoto D1 500 and 1000 flash heads.
The Bowens XMTR Remote is a TTL, high-speed sync compatible radio control and a trigger system for Nikon. The XMTR operates on the worldwide 2.4 GHz frequency and features a host of creative lighting features including curtain sync, sync delay, and full control over strobe function settings. All of this has been packed into a sleek, stylish and lightweight
The Badger Unleashed is a direct response to customer requests for a light with the compact form factor of the Honey Badger and the mobility and high-tech functionality of the S1. Interfit packed 250Ws of power, a 15W LED modelling lamp, and an in-line battery into a small body. Included HSS and TTL in addition to a new stroboscopic mode for the most versatile
The Profoto A1X AirTTL kit for Canon offers you the quality of a Profoto light but in a much smaller body. The rounded design of the head creates a stunning natural light with a soft and smooth fall-off. The light is incredibly easy to use; featuring a smart magnetic mount along with dedicated light shaping tools that click on and off quickly. These can
Bayonet fitting protective hood for Elinchrom heads. Helps protect your head from damage when not in use, and keeps the dust off, too!