Flash Heads and Kits
This High-Speed Sync transmitter unit has been developed in partnership with Elinchrom and is used to wirelessly trigger the Rotolight NEO II on-/off-camera LED light and flash unit. The Neo II system allows you to sync up to 10 lights, in 4 groups, at distances up to 200 m. This variant is for use with Canon camera bodies.
Designed for easy installation, this spare or replacement flash tube works with the Bowens XMT flash heads. This tube emits a 5600K light.
A replacement Lithium-Ion battery for the Profoto A1. These high-capacity batteries last up to 4x longer than AA batteries, and don’t suffer from performance fade. With the A1 Battery Charger this Li-Ion battery can be fully charged within 80 minutes. This battery provides up to 350 full-power flashes.
Replacement 205W Halogen 230V ES27 fitting modelling lamp for use in Bowens studio flash heads. (This model with clear glass replaces the previous frosted/pearl version and although a lower wattage produces the same light output with a slightly lower current requirement)
The Air Remote TTL-C is designed to wirelessly integrate Profoto B1 and B2 lights with a Canon camera and operate them from up to 300 m away. Simply attach the module to the hotshoe and set for either automatic TTL mode or Manual mode and you'll be good to go! TTL mode is ideal when you just need a simple point-and-shoot set-up, while the Manual mode offers
Bayonet fitting protective hood for Elinchrom heads. Helps protect your head from damage when not in use, and keeps the dust off, too!
This Modelling Lamp is a generic 100w replacement bulb for use with the Elinchrom flash heads including D-Lite and BRX models.
This is an INT515 60 Watt modelling lamp is for use with various Interfit 150, 200 and 300 Watt flash heads, including the EXD200.
This Interfit CIA330 Sync Lead has a PC camera connection at one end and a standard large mono jack (6.3mm) at the other.
Spare or replacement flash tube for Elinchrom RX 300 and 600 heads.
The Interfit INT411 is an infrared flash trigger unit which sits on the camera hotshoe. The wide angle IR beam will trigger IR sensitive flash units when the shutter is released, removing the need for a physical sync cord; resulting in less studio clutter. Although suitable for use with most cameras, it is not suitable for use on Sony and Minolta hotshoes.
The Elinchrom Quadra Lithium Ion Battery is a small lightweight battery pack designed for use with the Elinchrom Quadra flash heads. Weighing in at just 730g the pack can provide up to 320 flashes at full power (twice the capacity of the original Lead-Gel version) and can be charged to full power in just 90 minutes. Designed to be robust it incorporates