Flash Heads and Kits
Designed for use with the Nanguang Luxpad 22 and 43 light panels, this battery magazine holds 6 AA batteries (not included) and allows you to use your LED lights on location. Ideal as a backup supply for those occasions where a mains supply is not readily available, to run the lights or recharge existing power options.
Designed to wirelessly and painlessly integrate your Profoto AirTTL lights with your Sony A7II, A7RII, or A7SII camera and operate lights from up to 300m away, the Profoto Air Remote TTL-S can simply be attached to the hotshoe and set for either automatic TTL mode or Manual mode. TTL mode is ideal for a simple point-and-shoot set-up, while the Manual mode gives you total control of your lighting.
This High-Speed Sync transmitter unit has been developed in partnership with Elinchrom and is used to wirelessly trigger the Rotolight NEO II on-/off-camera LED light and flash unit. The Neo II system allows you to sync up to 10 lights, in 4 groups, at distances up to 200 m. This variant is for use with Canon camera bodies.
The Profoto A1X AirTTL for Sony offers you the quality of a Profoto light but in a much smaller body. The rounded design of the head creates a stunning natural light with a soft and smooth fall-off. The light is incredibly easy to use; featuring a smart magnetic mount along with dedicated light shaping tools that click on and off quickly. These can also be stacked for an even larger array of ...
The PocketWizard N10-ACC (previously N90M-ACC-ND) Remote Cable is for remotely triggering the electronic shutter release of Nikon DSLR's cameras equipped with a 10 pin Remote Terminal. It is required for remote camera triggering with a MultiMax with ACC port or FlexTT5 trigger (not PlusII), if using TTL functions. In addition, the PocketWizard N10-ACC cable contains a pre-trigger connection. ...
A dedicated TTL (through the lens) remote for use with Canon DSLRs and the latest Interfit S1-series of monolights. The S1's TTL remotes give the users direct control over any S1 light in any shooting mode from the camera position. This camera-mounted transmitter is available for Canon, Nikon and Sony camera's and supports E-TTL II, i-TTL and P-TTL protocols respectively. Having three individual ...
The Bowens XMT Battery is a removable, rechargeable power source for the XMT500 TTL monolight. This lithium-ion battery provides 500 full power 500 Ws flashes on a 4-hour charge.
Control your Honey Badger from up to 100m away with the Honey Badger remote – giving you the flexibility to walk around your studio or set and retain control of your lighting. Access any of 15 channels so you can work in busy environments without any signal interference. The Honey Badger Remote is powered by 2 AAA batteries, and can be powered by MicroUSB.
The Profoto Air Remote TTL-F is a small, wireless radio transmitter designed to wirelessly integrate your Profoto AirTTL lights with your Fujifilm cameras. Designed to sit in the camera's hotshoe, the TTL-F can operate lights from up to 300m away, and be set to either automatic TTL mode or Manual mode. The remote offers full TTL and HSS capability with Profoto's B1X, B1, B2, D2 and Pro-10 lights.
This Interfit CIA330 Sync Lead has a PC camera connection at one end and a standard large mono jack (6.3mm) at the other.
The Pocket Wizard MM1 Electronic Flash Cable is a 16 inch miniphone right angle to miniphone straight cable to connect PocketWizard to Elinchrom MicroCompact, Broncolor, Alein Bees, Visatec, etc. It can also be used for Bronica 6x6 & 645 motor drive connection and Hasselblad motor grip motor drives.
The Interfit INT038 is a spare or replacement 75w modelling lamp for use with the Interfit EX150 MKII flash head.