The Lee Colour Lighting Effects Pack contains a selection of saturated effect colours for use on backgrounds and for accent lights. In addition to general effects the three primary colors (red, green and blue) can be used for colour mixing. The pack contains twelve 250x300mm gel filters (2 of each of the following colours 181, 119, 139, 010, 106 and 790)
Lee Adaptor Rings screw onto your lens to accommodate the filter holder or lens shade. Once the ring is in place the holder clips into place using a smooth, quick release spring loaded mechanism. Wide-angle adaptor rings are designed so that the filter is placed as close as possible to the front element of the camera lens, and should be used when vignetting
Create the perfect shot by controlling your light source with this Natural Density filter. Specially designed to reduce light intensity without changing colour. The 0.9 Graduated Neutral Density filter reduces exposure to selected area by 3 stops, without affecting colour balance.
The professional kit contains two basic filter holders that connect together via a tandem adaptor, allowing even more filters to be fitted in front of the lens. Each holder can be individually turned to achieve independent rotation of grads and polarisers
This new triple pouch is made of the same tough material as the standard single pouches but takes three filters and is ideal for carrying your favourite LEE resin set when on location. Alternatively, the pockets are wide enough to carry holders and adaptor rings. The pouch has belt loops on the back and allows quick access to the filters via a Velcro flap
Lee Standard Adaptor Rings feature an aluminium screw thread and attach onto the end of your lens to accommodate the Lee Filter Holder or Lens Shade (available separately). Simply screw the Adapter Ring onto your lens and the holder will clip into place by a smooth, quick release spring loaded mechanism. There are also Wide Angle Adapter Rings available
The Lee SW150 150x150mm Super Stopper ND glass filter reduces the amount of light entering the lens by 15 stops. Its 4.5 density and 32,000 (15 stop) filter factor means that an ordinary 2-second exposure will take over 17 hours to expose through the filter, allowing you to photograph with a wider aperture or slower shutter speed in bright daylight. By
Whether you need to balance the exposure between sky and foreground, eliminate distracting reflections from water or extend your exposure to convey a sense of peace and stillness, the Lee Seven5 Deluxe Kit contains everything you need for creative photography. Included in this kit are the following: 1x Lee Seven5 filter holder, 1x Lee Circular Polariser
A quartet of 100x100mm polyester filters which all absorb varying degrees of the blue and blue-green parts of the spectrum, creating different tones and contrasts of skies and foliage on black and white film. They can also be used to create special effects.
The Lee Seven5 Polariser has been made with a unique clip-on design and can be snapped onto the front of the Seven5 filter holder (not included, available separately). The Seven5 Polariser filter allows you to significantly reduce reflections and glare from non-metallic surfaces. The Polariser also enables colours to become more saturated and appear clearer
Lee Back Plate Complete Retraining Assembly. A spring clip housing that replaces the spring latch on the filter holder and lens hood.
The Lee 100mm Neutral Density (ND) 0.6 Graduated Medium filter enables users to adjust the exposure across the frame by 2 stops, without affecting the colour balance. This filter is ideal for use when elements of the scene protrude into the sky, be that the rooftops of buildings or the peaks of mountains. The nature of the transition between coated and