Product Code: 1608449

Used Lee Foundation Kit

Discontinued
Condition : 9-

Shows little signs of use with some minor marks (4, maybe 6). This is most likely to be on the hot shoe, screens, base, lense barrel, etc.

Condition : 9-

Filter shows light signs of use, filter shows very few cosmetic marks and scratches including wear and marks to the holder, rusting and slightly bent retaining pin
Filter is supplied with box, manual, pouch

The Lee Foundation Kit is made up of the Lee 100mm filter holder and a storage pouch. The holder takes both resin and glass filters (100x150mm) and attaches to the end of your lens via an adapter ring (not included, available separately). The holder can be constructed to take up to three filters (2mm thick) at any one time using the parts included in this kit (remember, though, the more filter ...

Back to top
The Lee Foundation Kit is made up of the Lee 100mm filter holder and a storage pouch. The holder takes both resin and glass filters (100x150mm) and attaches to the end of your lens via an adapter ring (not included, available separately). The holder can be constructed to take up to three filters (2mm thick) at any one time using the parts included in this kit (remember, though, the more filter guides added, the higher the likelihood of vignetting with wide-angle lenses).

The Lee Filter System:

In order to attach the Lee Filter Holder to your lens, an adapter ring must be purchased. Adatper rings are available in a variety of thread sizes - please check the end of your lens to determine the size you need. The adaptor ring screws onto the camera's lens and, in turn, the filter holder clips onto the adaptor ring. The adaptor ring screws onto the lens with a fluid action, thanks to the sturdy construction and aluminium screw thread. Then simply slide your filter into one out of the three slots on the holder.

Adapter Rings

The adaptor ring screws onto the camera's lens and, in turn, the filter holder clips onto the adaptor ring. The adaptor ring screws onto the lens with a fluid action, thanks to the sturdy construction and aluminium screw thread.

Lee Foundation Kit System
Back to top

Product Specification

For Use With Lee Filter
Type Filter Holder
Back to top
Back to top
Back to top
Back to top
Product Code: 1608449-wex Manufacturers Part Number: FHFK Got a question? Get it answered...