USED Nissin Di622 MkII Speedlite - Canon Fit
Excellent - Very little signs of use, with no more than a few cosmetic marks
This flashgun shows very light use, the flashgun exhibits very few marks including shining to the edges around the body, scratches on the infrared sensor cover.
Shutter Count (approximately): Not available
Included: Flash Stand,White Box. Please note this is not supplied with a Manual, Pouch. More
Thinking of upgrading? Trade in today
This flashgun shows very light use, the flashgun exhibits very few marks including shining to the edges around the body, scratches on the infrared sensor cover.
Shutter Count (approximately): Not available
Included: Flash Stand,White Box. Please note this is not supplied with a Manual, Pouch.
The Nissin Di622 MkII Speedlite builds on the success of the original Di622 and now includes 3 wireless modes, a PC sync socket, a 3.5mm mini phono jack socket, and a My TTL setting allowing the user to a default exposure mode up to +/- 0.75EV and greater compatibility (not compatible with the 1DS). Fully compatible with the Canon E-TTL and E-TTL II flash system the Di622 MkII has a guide number of 44, bounce and swivel head, zoom coverage of 24-105mm (16mm with included wide angle reflector) and a 6 step manual power control.
Nissin Di622 MkII Key Features
HIGH POWER G.No.62m (ISO 200) is obtained at the reflector position of 105mm focal length.
BOUNCE FLASH Bounce and Swivel head for 90 degrees upward and 270 degrees horizontally. The flash head also stores a small reflection panel for fill-in shots.
TTL FLASH Di622 MARK II is compatible with Canon's E-TTL and E-TTLII system.
WIRELESS REMOTE FLASH Slave Digital (SD): Di622 Mark II synchronizes to pre-flash systems. Slave Film (SF): Di622 Mark II synchronizes to traditional single flash systems. Wireless TTL: Di622 Mark II synchronizes to wireless remote flash systems. The master flash is to be set at Channel 1 group A in wireless remote mode.
TTL FLASH LEVEL COMPENSATION The flash power level can be adjusted from -1.5EV through +1.5EV by 0.5EV steps.
NISSIN ORIGINAL "MY TTL" SETTING The TTL flash power level is pre-set for exposure at factory. You can, however, reset the TTL to the desired exposure level, in +/- 0.75 Ev. by 0.25 Ev increments.
Specifications:
- Guide Number: 44m, 145ft. (ISO 100), 62m, 205ft. (ISO 200)
- Illumination coverage: 24-105mm (16mm wide angle diffuser)
- Turning head: 90 degree upward, 90 degree to left, 180 degree to right
- Power source: 4 X AA or equivalent Mi-MH, lithium
- Recycling time: 5 sec., with fresh alkaline batteries
- Flash exposure control: E-TTL and E-TTL II for Canon cameras.
- Manual(Variable power): 6 levels : Full - 1/2 - 1/4 - 1/8 - 1/16 - 1/32 powers
- Wireless mode: SD: Slave Digital (with 6 levels), SF: Slave Film (with 6 levels), Wireless TTL remote Channel 1 Group A (Controlled by master flash)
- Flash Power Lock: FE lock (for Canon)
- Dimensions: 77(W) x 130(D) x103(H) mm / 30(W) x 51(D) x 40(H) inches
- Weight: 315g (without battery) / 11oz
Product Specification
Compatibility | Canon DSLRs |
Flash Metering | E-TTL, E-TTL II |
Max Guide Number | 44 |
Size [mm] | 77 x 130 x 103 mm |
Weight [g] | 315.00 |