The Phottix Mitros+ TTL Transceiver Flash is the premier model in the already impressive Mitros range – a feature-heavy flashgun with integral flash triggers: An Odin transmitter/receiver and Strato receiver. With full E-TTL I/II compatibility, built-in IR triggering (with both Master and Slave modes), AF assist light, auto/manual zoom head (coverage from 24-105mm), bounce and swivel head, High ... More
Phottix Mitros+ TTL Flashgun - Canon
Sorry, there are no more available.
The Phottix Mitros+ TTL Transceiver Flash is the premier model in the already impressive Mitros range – a feature-heavy flashgun with integral flash triggers: An Odin transmitter/receiver and Strato receiver. With full E-TTL I/II compatibility, built-in IR triggering (with both Master and Slave modes), AF assist light, auto/manual zoom head (coverage from 24-105mm), bounce and swivel head, High Speed Sync and Rear Curtain Sync and fast recharge times, it offers the professional photographer a wealth of functionality. The Guide number of 58 means there is plenty of power for both on and off-camera shooting in challenging conditions, or for driving a softbox. A diffuser and case are included and the design features a USB port for future firmware upgrades.
Built-in: Phottix Odin Transmitter and Receiver, and Strato Receiver
Canon-compatible Master/Slave IR Triggering Modes
ETTL I/II, Manual and Multi Stroboscopic Modes
High Speed Sync and Second Curtain Sync
AF Assist Light
Flash Zoom: 24-105mm
External Battery Port, 3.5mm Sync Port
Quick Flash Mode
What is the Mitros+ TTL Transceiver Flash
The Mitros+ TTL Transceiver Flash is a TTL flash with built-in Phottix-compatible flash triggers. Simply: It’s a TTL flash with flash triggers built in.
What does it do?
The Mitros+ has a multitude of uses. It’s a feature-packed TTL flash; everything you would expect and need in a hot shoe flash. Use it on camera just as you would any hot shoe flash – in TTL, Manual or Multi Stroboscopic Mode. New additions are built-in:
Phottix Odin Transmitter
Phottix Odin Receiver
Strato TTL Receiver
With Odin functionality built-in the Mitros+ can be used to trigger Phottix Odin and Strato Receivers. Likewise: you can also trigger the Mitros+ using a Phottix Odin TCU or Strato II Multi Transmitter. Using the Mitros+ in Odin Transmitter Mode provides the same functions found on the Phottix Odin, including:
Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels)
Remote power control in Manual Mode: Full power to 1/128 in 1/3 stop increments.
Mix TTL and Manual flash – fire some groups in TTL, others as manual.
Remote power control in A:B ratio modes with +/- EV adjustments.
High speed sync – shutter speeds up to 1/8000 sec.
Second curtain sync functions.
Remote flash head zoom adjustments – auto or manual
The Mitros+ will control and trigger other Mitros+ flashes in receiver mode or Phottix Odin Receivers. Like the Phottix Odin, the Mitros+ with a backlit LCD, is intuitive, and easy to use and understand.
The Mitros+ has a built-in Strato II Multi-compatible receiver. Existing Strato II Multi transmitter can trigger the Mitros+. The Mitros+ can also trigger Strato II Multi and Strato I Receivers when set in Odin Transmit Mode.
New with the Mitros+, built-in three location memory save and retrieval functions. Flash set up and custom function information can be saved in the Mitros+’s memory and be quickly recalled when needed. Use the Mitros+ in different modes for different situations? Quickly recall saved set-ups for fast use.
E-TTL and E-TTL II, Manual, and Multi Stroboscopic
Guide No.: 58/190 (at 105mm focal length, ISO 100 in meters/feet)
Flash coverage: 24-105mm (14mm with wide angle diffuser panel)
Zoom: Auto and Manual Adjustments
Rotation: 360°, Up-Down: -7 to 90°.
FEC (Flash exposure compensation): Manual
Sync modes: First Curtain Sync, Rear Curtain Sync, and High Speed Sync
Stroboscopic flash: Frequency: 1-199 Hz Number of flashes: 1- 100
Flash exposure confirmation: Blue LED lamp lights up in TTL mode
Flash Recycling (with size-AA alkaline batteries): Normal flash: Approximately 0.1-5 sec./Red LED indicator lamp lights up. Quick flash: Approximately 0.1-2.5 sec./Green LED indicator lamp lights up.
Internal power: Four size-AA alkaline batteries or size-AA Ni-MH batteries or compatible external battery pack.
Power saving: Non-wireless slave modes: 90 seconds, Wireless slave mode: (programmable) 10 minutes or 60 minutes
Transmission method: Radio Frequency and Optical pulse
Wireless options: Odin Tx, Odin Rx, Strato II Rx, OP Tx (Master), OP Rx (Slave), OP Slave, OFF
Transmission range (Approx.): Radio: 100m +, Optical: Indoors: 12-16m/39.3-52.4 ft., Outdoors: 7-9m/22.9-29.5 ft.
Reception angle: Radio: 360° all directions, Optical transmission: ±40°(horizontal) ±30°(vertical)
With our no deposit Buy Now Pay Later option, pay nothing for six months when you spend £250 or more, then either settle the cash price in full by paying a £29.00 settlement fee, or choose to spread the cost over 36 months at 19.9% APR Representative. Please see the repayment example below to see how much purchasing this item on finance would cost.
Item Value (Cash Price)
Total Amount Credit
35 x £12.88
Total Amount Payable
Annual Rate of Interest
Are you eligible for finance?
Applicants must be:
Aged 18 years or older from the application date
In permanent UK residence for a minimum of three years
Fulfil at least one of the following employment criteria:
In regular, permanent employment.
Retired from regular employment - With a minimum age of 50.
Not working through disability.
Note: All applicants will be subject to a credit reference check by the lender.
Credit is subject to application and status. Warehouse Express Ltd trading as Wex Photo Video act as credit broker and not the lender. Barclays Partner Finance act as the lender.
Can I repay early? If so how?
No repayments are scheduled in the initial six-month deferral period. However, it is possible to pay off the loan, either by way of a lump sum or in smaller amounts. If the loan is fully repaid within the six-month deferral period, then no interest is payable, but a £29.00 early-settlement will be incurred. Such repayments may be made to Barclays Partner Finance by cheque, debit card or standing order. Unfortunately it is not possible to set up a direct debit within the deferral period. Further information on how to make such repayments will be set out in the loan agreement pack provided by Barclays Partner Finance.
What happens if I don't repay within the first six months (deferral period)?
Following the six month deferral period, Barclays Partner Finance will initiate a monthly direct debit payment for the remaining duration of the loan. Interest will be charged at a rate of 19.9% APR on outstanding balances (backdated to the first date of the loan). Late payment penalties and early repayment charges will apply from this point. Barclays Partner Finance will send a reminder letter approximately one month before the six month deferral period is due to elapse. Note: If you chose to spread the cost and pay monthly, interest is charged from the start of the loan, not from the start of the repayment period.
What will I receive from the finance provider (lender)?
Barclays Partner Finance will send a loan agreement pack approximately four weeks after delivery of the goods, confirming that the account has been activated and, from this point, it is possible to make repayments against the loan.
For further information on how our finance product work, see our Finance help section.
To apply for finance, follow these three easy steps
1. Add items to your basket, and click 'Checkout'.
2. When selecting your Payment Option, choose ‘Apply for Finance’, and select your offer and terms.
3. Complete the Barclays Online Application form.† Make sure you have your bank details at hand.
† Once your application has been accepted, usually within minutes, we will immediately dispatch your equipment.