The Pocket Wizard AC3 ZoneController allows you to control your flash set up directly from your camera's position. Simply add it to your on-camera MiniTT1Transmitter or FlexTT5 Transceiver and you instantly have three zones of flash control whether working in E-TTL II or Manual model. Put your flashes wherever you want, without worrying about having to access them during a shoot. With the AC3 ZoneController, you are in total control of your flash.Three clearly labeled dials allow you to increase or decrease power to three zones of flash in 1/3-stop increments with a range of up to six stops. Three switches allow you to change zones between Manual, Auto (PowerTracking/E-TTL II) or OFF. Best of all, the design is simple with an intuitive interface. A firmware upgrade is now available for TT1 and TT5 via the Pocket Wizard website.
PocketWizard AC3 main features
Three independent zones of flash control
6 stops of flash control in 1/3rd stop increments
Works in PowerTracking/E-TTL II or Manual mode
Turn zones on and off remotely
Works with Canon Speedlites, AlienBees, White Lightning and Elinchrom RX flash.
Put your flashes where you want, without worrying about accessing them during a shoot.
Canon E-TTL II, Elinchrom RX, AlienBees, White Lightning
Off, Manual, Auto (PowerTracking/E-TTL II)
Auto = +/- 3 stops, 1/3 stop increments
LED: Green status indicator
Above -15° C (5° F) and below 50° C (120° F)
Above -30° C (22° F) and below 85° C (185° F)
high impact plastic
No battery required. Minimal power requirements received from the MiniTT1 or FlexTT5.
2" (5cm) wide x 1.7" (4.2 cm) long x .9" (2.1cm) tall
.82 ounces (23.25 grams)
Included in the box:
AC3 ZoneController, Quick Guide
MiniTT1 Transmitter or FlexTT5 Transceiver with firmware version 5.150 (or later) needed as a host.
Back to top