Replacement Lamps and Flashtubes
The Elinchrom Modelling Lamp is a 100w replacement bulb for use with the Elinchrom flash heads including D-Lite and BRX models.
A spare or replacement flashtube to fit the Elinchrom D-Lite One, 2 and 4 heads and the Ranger Quadra S head.
The Interfit INT038 is a spare or replacement 75w modelling lamp for use with the Interfit EX150 MKII flash head.
Replacement 275 Watt, 220/240 Volt modelling lamp (No.1 Photoflood) with E-27 screw-type fitting.
The Interfit SINT407 is a replacement flash tube for 150w Stellar, Stellar X, Stellar XD, Stellar Extreme, EX150 Mk1, EX150 Mk2 and 200w EXD200 flash heads.
Replacement 205W Halogen 230V ES27 fitting modelling lamp for Bowens studio flash heads. (This model with clear glass replaces the previous frosted/pearl version and although a lower wattage produces the same light output with a slightly lower current requirement)
Spare or replacement flash tube for Elinchrom RX 300 and 600 heads.
Spare or replacement Elinchrom 300 watt modelling lamp with a GX 6.35 base fitting.
This is an INT515 60 Watt modelling lamp is for use with various Interfit 150, 200 and 300 Watt flash heads, including the EXD200.
This is a spare or replacement flashtube for the Profoto D1 500 and 1000 flash heads.
Find out more about the Interfit 250W Modelling/Replacement Lamp for 600/1000w flash heads and 750w Tungsten Heads
This is an INT500 Modelling or Replacement Lamp for 600/1000w flash heads and 250/750w Tungsten Heads, including the INT155, INT156, INT157 and INT158. Care should be taken when installing as fingerprints will decrease the lifespan of the bulb.
Spare or replacement flashtube for the Elinchrom BXRi 250, 500 or Quadra A studio flash heads.