Rigs and Cages for DSLR Sized Cameras
This SmallRig mount has been designed to allow you to attach your LaCie SSD to select camera rigs including cages for BMPCC 4K/6 and the Sigma FP. Using two 1/4”-20 screws, you can secure both your SSD and the connected USB-C cable. The mount features an offset attachment to help avoid interference when filming. Please note: you will need to use a longer
Shape's ideal straight rig for use with DSLR and small camcorders. The system uses Shape's Quick Handles, simple baseplate with 15mm rods and a comfortable shoulder pad.
The Honu v2.0 Cage is compatible with the Panasonic GH3/GH4 and the Sony A7/A7r. With an extended battery cut out and a slotted camera mount, you will have full access to the battery, audio/video ports, and memory card. This version is supplied with 15mm bars support.
The SmallRig 2105 Cage is the first custom designed cage for Sony RX100 III, IV and V and seats the camera firmly with the lens ring at the front of the cage without blocking the user’s access to ports and buttons. There are several holes on the top of the cage used to attach Top Handle 1984, whereas the Cold Shoe Extension 2044 can be attached on the right
Find out more about the SmallRig Half Cage for Blackmagic Design Pocket Cinema Camera 4K/6K - CVB2254
The SmallRig Half Cage for Blackmagic Design Pocket Cinema Camera 4K/6K is a form-fitting cage that is secured with 1/4"-20 screws on the bottom. Additional locating pins and rubber pads are also in place to guard against wiggles and scratches. There are also built-in NATO rails located on the top and left side of the cage. These can be used to attach SmallRig
The SmallRig 1255 Swat NATO Clamp comes with 1/4" and 3/8" standard mounting holes and is compatible with Safety Rails and SlideRail-Clamp.
The SmallRig Cage for Panasonic S1/S1R With DMW-BGS1 Battery Grip provides protection for the camera and mounting threads to attach accessories such as a microphone, external monitors, and lights.
The SmallRig 1631 Cold Shoe Adapter with 3/8, to 1/4, Thread (2 pcs) is made of Aluminium Alloy and is part of the CoolArm11. It can be used to mount an accessory with 1/4" socket to the hot shoe of a camera. The thread is 3/8" to 1/4". The thread top part is 1/4", bottom part is 3/8".
This discreet, simple cage is designed to turn the Blackmagic Pocket Cinema into a production ready camera. It adds a range of ¼ inch screw threads so you can easily mount accessories such as monitors and viewfinders.
The CFSLR Hague Digital SLR Camframe Camera Cage has been designed to hold DSLR type cameras. HD digital cameras, such as the Canon EOS 5D MK III and Lumix GH4, produce great HD video but can be difficult to hold for handheld filming.
The SmallRig Universal Holder for External SSD has been designed to mount a SSD hard drive onto your camera. It’s specifically designed for cameras such as the BMPCC 4K & 6K and Z Cam E2. It features stretchable spring-loaded clamps that fit a large number of different SSDs and a detachable cold shoe which can be fixed on the bottom or side of the holder,
Find out more about the Shape Cage with Push-Button Top Handle + 15mm Rod Support for A7II A7SII + A7RII
Including both a Shape push-button top handle and 15mm Rod Support with 2 x 10 inch long rods, this cage is designed for the A7S II/A7R II/A7 II, adding a layer of protection to your camera and multiple 1/5” screw threads for accessories such as monitors, viewfinders and recorders. The cage also includes a removable holder for Metabones lens adapters and