USED Rode NTG3B Shotgun Microphone - Dark Grey (Sold for Spares)
This Mic will not connect or register to any camera, correct settings were used when testing the item however the Mic remained unresponsive. This unit is sold for spares or repairs only, with no warranty.
Shutter Count (approximately): Not available
Supplied with: Original Box, Rode Storage Cylinder, Rode WSNTG3 Pop Filter (Windscreen), Manual
Not included: : Rode RM5 Mic Clip, Rode ZP2 Padded Zip Pouch
The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering or wherever high-resolution broadcast audio is required.As RØDE's premier directional microphone, the NTG3 exhibits rich, warm audio quality with a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it a reliable option when recording in environments where condensation is an issue.
Key Features: Rode NTG3B Shotgun Microphone - Dark Grey
- Superior broadcast sound quality
- High Sensitivity
- Super-cardioid polar pattern
- Designed to withstand adverse environmental conditions
- 50% less self-noise than the majority of shotgun microphones
- Extremely low handling noise
- High level of immunity to radio frequency interference
- True condenser (external RF biased)
- Includes durable aluminium storage cylinder for transport, pop filter, mic clip, and large zip pouch
- Designed for professional use on film, television, ENG & wherever high resolution broadcast audio is required
- 10 year extended warranty
Specifications
- Acoustic principle: line gradient
- Active electronics: RF bias
- Capsule: 0.50"
- Polar pattern: super-cardioid
- Address type: End
- Frequency range: 40 Hz - 20 kHz
- Output impedance: 25 O
- Maximum SPL: 130 dB SPL (@ 1 kHz, 1% THD into 1 KO load)
- Maximum output level: 8.2 mV
- Sensitivity: -30.0 dB re 1 Volt/Pascal (31.60 mV @ 94 dB SPL) +/- 2 dB @ 1k Hz
- Equivalent noise level (A-weighted): 13 dB-A
- Power options: phantom power
- Weight: 163 g
- Dimensions (H x W x D): 255 mm x 19 mm x 19 mm
- Output: XLR
- Warranty: 1 year with free extension to 10 years
Product Specification
| Microphone Connector | XLR |
| Pick-up pattern | Cardioid |
| Size | 255 x 19 x 19 mm |
| Type | Shotgun |
| Weight [g] | 163.00 |
| Wireless | No |