SmallRig Cage for Sony A7RV/7IV/7SIII/1/7RIV/7V with Vertical Grip 6114
This SmallRig Cage is a wraparound aluminium alloy cage for Sony Alpha bodies with an attached VG-C4EM vertical grip. It locks to the camera with a bottom 1/4"-20 screw and dual side locks, while silicone pads protect contact points. Built-in accessory mounts, dual cold shoes, a front rod clamp, and an Arca-Swiss base facilitate transitions between handheld, tripod, and gimbal setups with ease.
SmallRig Cage (Sony A7RV/7IV/7SIII/1/7RIV/7V with Vertical Grip) Key Features:
- Wraparound cage fits supported Sony A7RV/7IV/7SIII/1/7RIV/7V cameras with a VG-C4EM grip
- Three-point locking uses bottom screw and dual side locks
- Built-in silicone pads protect camera contact points
- Maintains access to buttons, card slot, battery compartment, and ports
- Multiple 1/4in-20 and 3/8in-16 holes support rig accessories
- ARRI locating holes secure compatible handles, mounts, and magic arms
- Dual cold shoe mounts hold microphones or compact LED lights
- Built-in Arca-Swiss plate transitions quickly onto tripods and gimbals
- DJI RS compatibility supports handheld to stabilised shooting changes
- Front 1/4"-20 locating hole supports 15mm rod clamp use
- Strap slot and QD socket support wrist and shoulder straps
- Magnetic double-ended wrench stores underneath for fitting and removal
FAQs:
Which Sony cameras does this cage fit?
This cage is made for the Sony a7R V, a7 IV, a7S III, a1, a7R IV, and a7 V when used with the VG-C4EM vertical grip. The cage wraps around the camera and grip assembly, so the fit is based on that combined body shape rather than the camera alone. It also keeps access open to the camera buttons, media card slot, battery compartment, and ports.
How does the three-point locking system secure the camera?
The cage attaches with one bottom 1/4in-20 screw and dual side locks. The bottom screw pulls the camera down into the cage, while the side locks stop the body from twisting inside the frame. Silicone pads sit between the cage and camera to reduce scratches and improve contact for a firm fit.
Can the cage be used with tripods and DJI gimbals?
Yes. The bottom has a built-in Arca-Swiss quick-release plate, so the cage can be mounted straight onto Arca-type tripod heads without adding a separate plate. It is also compatible with DJI RS 2, RSC 2, RS 3, RS 3 Pro, RS 4, RS 4 Pro, and RS 5 gimbals, so you can move from handheld shooting to tripod or stabilised work without removing the cage.
What accessories can be mounted to the cage?
The cage includes multiple 1/4in-20 threaded holes, 3/8in-16 threaded holes, and ARRI locating holes. These mounting points support compatible top handles, side handles, monitor mounts, magic arms, and other rigging accessories. Two cold shoe mounts provide direct mounting positions for a microphone or a compact LED video light. A front 1/4in-20 locating hole also works with a compatible single rod clamp for a 15mm rod, follow focus, or related lens-control accessories.
How portable is the SmallRig Cage for Sony Alpha bodies?
Very portable. This cage measures 16.6 x 14.6 x 5.8cm and weighs 200g. Its aluminium alloy, stainless steel, and silicone construction adds a protective frame and mounting points without making the camera setup unnecessarily bulky. A magnetic double-ended wrench stores at the base, so the fitting tool stays with the cage. The strap slot and QD socket also give practical carrying points for wrist or quick-release shoulder straps.
Product Specification
| Compatible With | Sony A7RV/7IV/7SIII/1/7RIV/7V |
| Type | Cage |