Used Wimberley P50 Quick Release Plate
Product Code: 1750670

Used Wimberley P50 Quick Release Plate

In Stock
Item Condition : OB (Open Box)

Item has previously been purchased, opened and then returned as unwanted.


1x Used Wimberley P50 Quick Release Plate Sorry, there are no more available.

Item Condition : OB (Open Box)

The item shows signs that is has been tested.There are some cosmetic marks present.Several very small dings and areas of paint loss to the edges of the plate.The packaging shows minor wear.Stock Image used.

Back to top
Wimberley Quick Release plates are renowned for their quality and important innovative features, which distinguish them from other plates on the market.

Key Features

  • Dual Safety Stops
    The safety stops at the front & back of the Wimberley P50 plate prohibit your lens from accidentally slipping out of the quick release adapter(easily removed with supplied hex wrench if desired).
  • Double-Dovetail Cross-Section
    The Wimberley double-dovetail design allows attachment of their Shape Shifter flash bracket system to the upper or lower surface of the P50 plate.
  • Works with All Common Flash Brackets
    Drilled holes accept flash arms from Kirk & Really Right Stuff

Lens feet with larger 3/8" mounting holes require insertion of a 3/8" to 1/4" reducer bushing to fasten plates using these holes.

The P50 plate is for use with the following lenses:

    Nikon: 400mm 2.8 MF, 400mm 2.8 AF-I, 400mm 2.8 AI-S, 800mm 5.6 MF

    Canon: 400mm 2.8 non IS, 400mm 2.8 IS, 600mm 4.0 non IS, 600mm 4.0 IS, 600mm 4.5, 800mm 5.6 non IS, 800mm 5.6 IS

    Sigma: 150-500mm, 300-800mm 5.6, 500 4.5 HSM, 800mm 5.6

    Pentax: 250-600mm 5.6 ED(IF), 600mm 4.0 AF SMCP-FA, 800mm 6.7 IF SMCP-67, 1200mm 8.0 MF SMCP-A

    Note for Sigma Lenses: The above recommendations assume that the standard factory foot is installed on the lens. It has come to our attention that Sigma sometimes installs their larger TS-41 Replacement Collar and Foot on their lenses. We suggest that you measure the length of the foot on your lens to make sure that our suggested plate is correct (the plate should be about 1" longer than the foot on your lens).

Back to top

Product Specification

For use with For Nikon 600 f4 Canon 600 f4
Type Quick Release Lens Plate
Back to top
Back to top
Product Code: 1750670-wex Manufacturers Part Number: P50