The XMTR is a TTL and High-Speed Sync compatible radio control and trigger system which operates on the worldwide 2.4GHz frequency for Canon cameras. With a host of creative lighting features such as rear curtain sync, sync delay, and full control over strobe function settings, enable photographers to create inspired lighting set-ups at the press of a
A replacement 275 Watt, 220/240 Volt modelling lamp (No.1 Photoflood) with E-27 screw-type fitting for Bowens. Suitable for the 400Rx (and similar) heads.
Engineered for speed, reliability and cutting edge aesthetics, the Bowens XMT500 Twin Head Kit boasts an enhanced specification, including TTL, high-speed sync (up to 1/8000s) flash durations as short as 1/10,309s and recycle times as rapid as 0.01s. A foldaway stand mount allows portability and easy storage, and an integrated reflector cap allows you to
The Bowens Folding Stand is a versatile photographic lighting support stand with a maximum height of 190cm. Lightweight at 0.9kg and foldable down to 54cm, this stand from Bowens is ideal for both on location lighting and work in the studio.
Designed for easy installation, this spare or replacement flash tube works with the Bowens XMT flash heads. This tube emits a 5600K light.
Replacement UV coated flashtube for the Bowens Gemini heads.
Engineered for speed, reliability and cutting edge aesthetics, the Bowens XMT500 Flash Head boasts an enhanced specification, including TTL, high-speed sync (up to 1/8000s) flash durations as short as 1/10,309s and recycle times as rapid as 0.01s. A foldaway stand mount allows portability and easy storage, and an integrated reflector cap allows photographers
The backlight stand is the smallest of the Bowens light stands, allowing you to place your lights very nearly on the floor - at just 7cm from the ground - or up to a maximum height of 85cm. Constructed from black anodised aluminium for a sturdy, attractive and non-reflective appearance, Bowens stands feature high-quality aluminium locking clasps, rather
The Bowens Lumiair Softbox 100x100cm is one of a range of softboxes that have been created to carefully control the colour temperature of reflected light and have been designed to ensure that materials used in the construction do not fluoresce under UV light. The integral tension of Lumiair rods create the straightest edges possible for absolute control
This 4-section, aluminium Maxi Stand from Bowens features t-locking knobs and can extend to a maximum height of 3.8m and retract down to 1.1m. It weighs 2.4kg.
This portable and lightweight entry-level light support stand reaches 305cm in height and closes to 86cm. It is constructed from black aluminium for a sturdy, attractive and non-reflective appearance. Bowens stands feature high-quality aluminium locking clasps - rather than plastic - which ensures ultimate stability and maximum safety.
Replacement 5A Fuse for Bowens 250/500 Flash Heads