A 30-45cm Atomos Coiled Full HDMI to Full HDMI cable specifically designed for filmmakers.
The TetherTools TetherPro USB 2.0 A to Mini-B is an 8-pin, 15ft cable that has been reinforced through a Ferrite core for optimum performance. Reduced transmission errors, and fully-lined shielding protect the cable from external signal interference, making the TetherPro a key piece of kit for professional photographers and filmmakers.
Find out more about the TetherTools TetherPro USB 2.0 Male to Mini-B 5 pin 15 foot Hi-Visibility Orange
Featuring gold-plated connectors for corrosion-resistance, the TetherTools TetherPro USB 2.0 Mini-B 5-Pin Cable in orange connects to your camera using a Mini-B 5-Pin port, allows you to tether your camera to a computer. It has a reinforced Ferrite core to filter out signal noise and reduce transmission errors, and is finished in high-visibility orange to reduce to chances of tripping or snagging.
The TetherTools TetherPro USB 2.0 Active Extension 16ft Hi-Visibility cable in orange allows for longer tethering distances without worrying about signal errors or corrupt data transfers. Its bright orange finish reduces the chances of trips, snags and leaving it behind.
This 4.6m TetherPro USB 3.0 SuperSpeed Male to Micro B Cable from TetherTools features the latest in USB 3.0 technology to ensure a fast, consistent, and reliable transfer of data. This 4.6m cable is finished in a bright orange reducing the chances of trips and snags.
The Nikon UC-E20 microUSB cable allows Nikon users to connect their Nikon digital camera to a computer for file transfer and firmware updates.
Featuring a male USB-A plug that can be used with any external USB battery pack or wall power adapter, the TetherTools Case Air Power Split Cable is designed to recharge and power the Case Air whilst simultaneously using it for shooting. It is ideal for long wireless photoshoots, or for charging the Case Air without having to shut down your wireless tethered session.
This Syrp 3C Link Cable is used to link up your camera to the Syrp Genie for making time-lapse and real-time videos. This cable is compatible with the following cameras: Canon EOS 7D, 50D, 40D, 30D, 6D, 5D, 20D, 10D, 5D Mark III, 5D, Mark II, 1D X, 1D C, 1D Mark IV, 1D(s)Mark III and 1D(s)Mark II(N).
Designed to remove the stress and strain from a cable or cord, the TetherTools JerkStopper USB Mount ensures that your plug stays in place and is protected from damage. Suitable for cables with diameters from 3.5mm to 8.5mm, it provides an anchor point via a USB port that allows for slack in the cord or cable, preventing dislodgment. The JerkStopper USB is also available in a 3 pack.
The TetherTools JerkStopper Clip-On Cable Support is designed to removes the stress and strain from a cable or cord, ensuring the plug stays in and is protected from damage. It provides an anchor point, allowing for slack in the cord which prevents stress, dislodging, and damage. The JerkStopper is designed for use with the TetherTools Aero Table but also works on surfaces up to 3.3mm thick.
Designed to support cable diameters from 3.5mm to 8.5mm, the TetherTools JerkStopper Tethering Camera Support removes the stress and strain from a cable or cord, ensuring the plug stays in and is protected from damage.
The Syrp Genie Sync Cable is designed to connect together a Genie motion control system and a Genie Mini, combining them together to add dual axis time-lapse and motion control.