Custom Brackets

4.6

Find out more about the Custom Brackets CB Mini-RC

Made from anodised aluminium the simple Custom Brackets CB Mini-RC bracket will allow you to take the flash off camera when using an off-camera cord or wireless operation. The offset position of the flash means it can be used with cameras that include a vertical shutter release button. The Custom Brackets CB Mini-RC is not recommended for use with the Nikon D2H.

In StockFree delivery available

Compare

£63.00

4.9

Find out more about the Custom Brackets CBFolding-T

Manufactured from black anodised aluminium and designed for taller DSLR's, or those with a battery grip attached, the Custom Brackets CBFolding-T flash bracket positions the flash above the camera and lens, regardless of the orientation, ensuring shadows and red-eye are kept to a minimum. Two buttons allow the bracket to be folded and stored away in the camera bag and the comfortable foam grip is ...

In StockFree delivery available

Compare

£94.00

4.3

Find out more about the Custom Brackets Digital Pro SV Kit

Professional looking design with easy rotating action from horizontal to vertical using roller bearings. Made from anodised black aluminium for strength with minimal weight this Custom Brackets Digital Pro-SV Kit bracket is designed to use on a tripod using the included QR Tripod quick release. Also included is a camera mounting plate.

Special OrderFree delivery available

Compare

£378.00

Find out more about the Custom Brackets MC

The Custom Brackets MC is a cold shoe mount for locating your radio slave unit, focusing light or TTL module to the upright of a Custom Bracket camera and flash mount.

Special OrderSave £5

Compare

£10.00Was £15.00

5

Find out more about the Custom Brackets Tilt Head AS (for Arca-Swiss Type)

Designed for use with long telephoto lenses, the Custom Brackets Tilt Head AS includes an Arca Swiss Style quick release platform that can be positioned two ways to accommodate either a camera or long lens. It uses separate lock and drag knobs for better control and mounts to any monopod or tripod using a 3/8-16* threaded mounting hole.

Special OrderFree delivery available

Compare

£250.00

Find out more about the Custom Brackets GFM Gimbal Flash Mount

The Custom Brackets GFM Gimbal Flash Mount is an adjustable flash mount with 6" extension. For use with all Gimbals or Arca-Swiss style compatible dove-tails. The flash can be mounted above the lens, or at a 45 or 90 degree angle. The flash arm may also be reversed so that the flash can be positioned off-centre.

Special OrderFree delivery available

Compare

£126.00

5

Find out more about the Custom Brackets CB Mini

Made from anodised aluminium the simple Custom Brackets CB Mini bracket will allow you to take the flash off camera when using an off-camera cord or wireless operation.

Special OrderFree delivery available

Compare

£63.00

5

Find out more about the Custom Brackets Gimbal Head

Designed to use with the longest telephoto lenses the Custom Brackets Gimbal Head features a true, maintenance free, roller bearing design for smooth and easy movement in all directions. The head can be used directly on a set of tripod legs or, with the base removed, on any Arca-Swiss type head with lenses up to 300mm. Separate drag adjustment and lock are provided for both horizontal and ...

Special OrderFree delivery available

Compare

£539.99

Find out more about the Custom Brackets QR-C Kit

The Custom Brackets QR is a camera quick release and sub-plate kit - a must for taking full advantage of the Custom Bracket system. This kit will allow you to quickly mount different camera makes and models (with different heights) to your bracket. (Includes one qr-C and one C-SP). Requires one camera plate for each camera and one additional camera sub-plate C-SP for each additional camera plate.

In Stock

Compare

£39.00

3.7

Find out more about the Custom Brackets CBFolding-S

Manufactured from black anodised aluminium and designed for smaller DSLR's, or those without a battery grip attached, the Custom Brackets CBFolding-S flash bracket positions the flash above the camera and lens, regardless of the orientation, ensuring shadows and red-eye are kept to a minimum. Two buttons allow the bracket to be folded and stored away in the camera bag and the comfortable foam ...

Awaiting StockFree delivery available

Compare

£94.00

Find out more about the Custom Brackets Folding-SB Side Bracket

This folding side-bracket with foam grip is designed to serve as an additional mount for flash triggers, flashguns, mics and other accessories, and serves as an additional grip to aid in steadying the camera (when shooting video, for example). The grip folds down for tidy storage and is manufactured from anodised aluminium, to keep the weight down.

Special OrderFree delivery available

Compare

£94.00

4

Find out more about the Custom Brackets RF-PRO Rapid Fire Bracket

The Custom Brackets RF-PRO Rapid Fire Bracket is a fully adjustable lightweight and compact flash rotating bracket designed for the photographer on the go. The RF-PRO will keep the flash unit above the lens in both landscape and portrait orientation, no more harsh side shadows! The RF-Pro can be used with most carrying strap systems such as: Spider Camera holster, Black Rapid, SunSniper and ...

Special OrderFree delivery available

Compare

£252.00

Find out more about the Custom Brackets GLM 8.5 Lens Plate

The GLM 8.5 is an 8.5 inch (21.6cm) lens plate, for use with Arca Swiss style quick releases. An optional anti-twist plate may be added, for additional security.

Special OrderFree delivery available

Compare

£53.99

Find out more about the Custom Brackets BH-1 Battery Holder

The Custom Brackets BH-1 Bracket is designed to support clip type batteries such as Quantum and Lumedyne, on a tripod or light stand of 1/2" to 1-1/4" width.

In Stock

Compare

£15.00

Find out more about the Custom Brackets RF-C2 Connector

The Custom Brackets RF-C2 Connector allows the RF_PRO Flash Bracket to be used with the Black Rapid system.

In Stock

Compare

£18.00

Find out more about the Custom Brackets WFM2 Locking Shoe Mount for Wireless Transmitter

The WFM-2 is a locking shoe mount for mounting wireless transmitters. It is designed for use with the CAB 9, CAB 14, CB Mini-RC and CB Mini.

Special Order

Compare

£13.00

Find out more about the Custom Brackets RF-Pro AS Rapid Fire Rotation Bracket with Arca Swiss Type Mount

The RF-PRO AS is a slick and solidly engineered rotating flashgun mount, which enables swift rotation of the flashgun. Constructed from anodised aluminium, the bracket's action uses roller bearings, resulting in a satisfactorily smooth and professional-feeling action.

Special OrderFree delivery available

Compare

£252.00

Find out more about the Custom Brackets CK-500 Conversion Plate

The Custom Brackets CK-500 Conversion Plate is designed to convert a Custom Bracket into an Arca -Swiss type mount. Designed for use with the following:- Digital PRO-M, Digital PRO-E, Digital PRO-SV, QRS-H2, QRS-E2, QRS-35-H, QRS-35-EV, QRS-35-SV.

In Stock

Compare

£31.00

Find out more about the Custom Brackets CK-501

The Custom Brackets CK-501 is a bottom plate designed to enable the bracket to be mounted directly, without use of a Custom Bracket Quick-release, into the Manfrotto 322RC2 Grip Action Ballhead. The CK-501 is for use with Digital PRO-M, Digital PRO-E, Digital PRO-SV, QRS-H2, QRS-E2, QRS-35-H, QRS-35-EV, QRS-35-SV.

In Stock

Compare

£15.00

5

Find out more about the Custom Brackets Digital Pro M Kit

Professional looking design. Easy to rotate using roller bearings from horizontal to vertical. Anodised black aluminium for lightweight and strength. No lubrication needed - designed maintenance free. Adjustable flash height with tilt for eliminating red eye and shadowsComfortable foam grip on left side. Fits in camera bags using fold in legs and retractable upright. Palm grip for comfort and ...

Special OrderFree delivery available

Compare

£378.00

Find out more about the Custom Brackets Folding-SB Side Bracket with Arca-Swiss Style Mount

This folding side-bracket with foam grip is designed to serve as an additional mount for flash triggers, flashguns, mics and other accessories, and serves as an additional grip to aid in steadying the camera (when shooting video, for example). The grip folds down for tidy storage and is manufactured from anodised aluminium, to keep the weight down. This model features an Arca-Swiss style clamp, ...

Special OrderFree delivery available

Compare

£113.00

Find out more about the Custom Brackets Tilt Head Flash Mount

The Custom Brackets Tilt Head Flash Mount is designed for use with Custom Brackets Pan-Tilt AS, Tilt Head AS, CB Gimbal and CB Gimbal-LS together with Arca-Swiss compatible dove-tailed lens feet and plates. The adjustable extension allows you to position a flash up to 18 inches above the centre of the lens.

Special OrderFree delivery available

Compare

£126.00

Find out more about the Custom Brackets RF-WT Wireless Transmitter Mount

The RF-WT is a locking shoe mount with an anti-twist fitting is designed to mount a flash transmitter onto the RF-PRO bracket. The WFM-1 can be indexed 90 degrees on the RF-WT.

In Stock

Compare

£30.00

Find out more about the Custom Brackets Foot Shield

The Custom Brackets Foot Shield is designed to protect the rubber foot on the Manfrotto 685B that forms part of their Custom Brackets SteadyPod.

Special Order

Compare

£23.99

Find out more about the Custom Brackets 14 Inch Camera Accessory Bar

The Custom Brackets Camera Accessory Bars are designed to allow the use of two cameras, or a camera and flash (or other accessory), side by side on a tripod (both 1/4 and 3/8 inch threaded holes are included). Manufactured from black-anodized, aircraft quality aluminium to maximize strength and minimize weight they are available in two sizes, 9 and 14 inches. A cork base pad runs the whole length ...

Special Order

Compare

£41.99

Find out more about the Custom Brackets Folding-SA Side Arm Bracket with Arca-Swiss Style Mount

Designed to elevate the flashgun (with a nominal lens-to-flash distance of 27.9cm) and provide a comfortable, additional grip, this bracket folds down for easy storage, features a foam grip and uses an Arca-Swiss style clamp (which will require an Arca-Swiss plate). The bracket is ideally suited to smaller cameras, or those lacking a battery grip.

Special OrderFree delivery available

Compare

£113.00

Find out more about the Custom Brackets RF-C3 Connector

The Custom Brackets RF-C3 Connector allows the RF_PRO Flash Bracket to be used with the Sun Sniper, Custom SLR and Joby systems.

In Stock

Compare

£15.00

Find out more about the Custom Brackets WFM-1 Locking Shoe Mount

This locking shoe is designed to mount wireless flash triggers via its 1/4" - 20 thread. The mount features an anti-rotation fitting, ensuring that the wireless controller stays neatly facing in the right direction. For use with RF-PRO Series, CB Series (except CB Mini, CB Mini-RC, CB Digital-SB, CB Folding-SB, CB Folding-SAB), Digital PRO-E, HD Video Supports, GFM, and TFM.

Special Order

Compare

£13.00

Find out more about the Custom Brackets 9 Inch Camera Accessory Bar

The Custom Brackets Camera Accessory Bars are designed to allow the use of two cameras, or a camera and flash (or other accessory), side by side on a tripod (both 1/4 and 3/8 inch threaded holes are included). Manufactured from black-anodized, aircraft quality aluminium to maximize strength and minimize weight they are available in two sizes, 9 and 14 inches. A cork base pad runs the whole length ...

Special Order

Compare

£35.99

Find out more about the Custom Bracket HDV Pro Kit

The new Custom Brackets HDV Pro Kit is designed to hold DSLR cameras, together with a range of accessories when used for video recordings. The bracket will hold the camera and in addition it has several mounting points to hold a monitor, an LED light and a microphone. It includes two comfortable foam grips for use at eye level and a handle at the back for low-level shots.

Special OrderFree delivery available

Compare

£179.99

5

Find out more about the Custom Brackets FM

The Custom Brackets FM is a flash mounting plate to attach Metz MZ50 and MZ70 barrrel type flash to Custom Bracket flash mounts.

In Stock

Compare

£14.00

Find out more about the Custom Brackets RF-WT Wireless Transmitter Mount

The RF-WT is a locking shoe mount with anti-twist top piece, designed to smartly and conveniently mount a shoe-mount wireless transmitter onto a Custom Brackets RF-PRO. A very pro-looking piece of kit!

Special Order

Compare

£38.00

Find out more about the Custom Brackets CBGLA Anti-Twist Plate for GLM-2

The Custom Brackets CBGLA is an anti-twist plate, for use with the GLM-2. It attaches to the GLM-2 plate for 300mm and 400mm lenses used with Custom Bracket's Gimbal, Gimbal Basic, Gimbal Upgrade, Gimbal-LS, or Gimbal-LB, helping the lens plate in remaining firmly secured. (Photo shows GLA with GLM-2 plate as a ghosted image, for reference).

Special Order

Compare

£23.99

Find out more about the Custom Brackets AT Plate

The Custom Brackets AT Plate is an anti twist mount designed for use with all cameras on the CB Junior, CB Digital-T and CB Digital-S.

Special Order

Compare

£13.00

Find out more about the Custom Brackets Pan and Tilt Head with Arca Swiss Style Quick Release

A very compact aluminium pan and tilt head, ideal for travellers. The model features a bubble level, Arca Swiss style quick release, a captive aluminium clamp, pan/drag knobs and a black anodised finish.

Special OrderFree delivery available

Compare

£329.00

Find out more about the Custom Brackets FCN

The Custom Brackets FCN is a flash mounting plate for attaching Canon Off Camera Cords 2 and 3 and Nikon SC-17, 28 and 29 to Custom Bracket camera and flash brackets.

Special Order

Compare

£25.00

4

Find out more about the Custom Brackets FT-JR

The Custom Brackets FT-JR is a flash mounting plate for hot shoe mounted flash without off camera connecting cord. For use with Digital PRO-E, CB Junior, CB Digital-T, and CB Digital-S only.

Special Order

Compare

£27.00

Find out more about the Custom Brackets Folding-TA Side Arm Bracket with Arca-Swiss Style Mount

Designed specifically to accommodate tall cameras and those with battery grips, this flash bracket has a nominal lens-to-flash distance of 27.9cm, is constructed from anodise aluminium, folds down for easy storage and features a comfortable foam grip. It possesses an Arca-Swiss mount and requires the use of a separate Arca-Swiss style mounting plate.

Special OrderFree delivery available

Compare

£113.00

Find out more about the Custom Brackets QRMCK Manfrotto RC2 Conversion Kit

This conversion kit (comprising of a QRM-C and CK-501) is used to convert the Custom Brackets QRS-35-H, QRS-35-EV and QRS-35-SV brackets to fit the quick release system on the Manfrotto 3265 or 322RC2 Grip Action and standard ballheads that use the 3157N (RC2) plate.

Special OrderFree delivery available

Compare

£88.00

Find out more about the Custom Brackets Lens Plate GLM 5.5

Quick release plate designed for use with the Custom Brackets Gimbal Basic and Gimbal Head for lenses from 200mm to 400mm.

Special Order

Compare

£47.99

Find out more about the Custom Brackets PG

The Custom Brackets PG is an add on palm grip for the Custom Bracket Digital Pro-M. (Only required for models supplied without grip)

Special Order

Compare

£25.00

Find out more about the Custom Brackets QRM Quick Release for Manfrotto RC2

This quick release with 1/4-20mm tripod mount is for use with the Manfrotto RC2. A CK-501 is required for bracket to tripod use.

Special Order

Compare

£47.99

Find out more about the Custom Brackets FT

The Custom Brackets FT is a flash mounting plate for Vivitar 283 and 285, Metz 40 and 54 and Sunpak 120J flashguns. For use with Custom Bracket camera and flash mount.

Special Order

Compare

£33.00

Find out more about the Custom Brackets QRA-C Arca Swiss Conversion Kit

This conversion kit (comprising of a QRA-C and CK-500) is used to convert the Custom Brackets QRS-35-H, QRS-35-EV and QRS-35-SV brackets to fit the quick release system on Arca Swiss style heads and can be configured for cameras with or without vertical grips/battery packs.

Special OrderFree delivery available

Compare

£88.00

Find out more about the Custom Brackets FL

The Custom Brackets FL is a flash mounting plate to attach Lumedyne Classic series (round flash head type) to Custom Bracket flash mounts.

Special Order

Compare

£30.00

Find out more about the Custom Brackets FS

The Custom Brackets FS is a flash mounting plate for Sunpak 622 and 544 barrel type flashguns. For use with Custom Bracket camera and flash mount.

Special Order

Compare

£31.00

Find out more about the Custom Brackets Manfrotto RC2 Series Camera Quick Release

The Custom Brackets QRM-C is a quick release for use with the Manfrotto RC2 Series. It may be set up for use with both tall and short cameras. NB: Requires the use of a CK-501 for bracket to tripod use.

Special OrderFree delivery available

Compare

£59.99

Find out more about the Custom Brackets FQ-2

The Custom Brackets FQ-2 is a flash mounting plate for Quantum Q-Flash T5d-R. For use with Custom Bracket camera and flash bracket combinations.

Special Order

Compare

£29.00

Find out more about the Custom Brackets PG4 Long Palm Grip for Digital PRO-SV

This extended palm grip is for use in conjunction with the Digital PRO-SV, offering a more secure, versatile and comfortable hold.

Special Order

Compare

£25.00

Find out more about the Custom Brackets FQ-1

The Custom Brackets FQ-1 is a flash mounting plate for Quantum Q-Flash T4d and T5d. For use with Custom Bracket camera and flash bracket combinations.

Special Order

Compare

£28.00

Find out more about the Custom Brackets CBP

The Custom Brackets CBP is a bottom plate for the CMP reversible camera plate that when coupled with the QR-C camera quick release kit, allows the camera to be quick released off the bracket and placed directly into the tripod quick release (QR).

Special Order

Compare

£31.00

Find out more about the Custom Brackets AP-1 Plate

When attached to the upright Digital Pro Bracket, the Custom Bracket AP-1 plate has many uses, such as supporting Radio Slave units, TTL modules and focusing lights.

Special Order

Compare

£25.00

Find out more about the Custom Brackets Anti Twist Pins

The Custom Brackets Anti Twist Pins are designed for use with the Tilt Head supplied as part of the Custom Brackets SteadyPod they give extra security when attaching the head to the monopod.

Special Order

Compare

£11.99

Find out more about the Custom Brackets C-SP

The Custom Brackets C-SP is designed to attach a C35 camera plate to a QR-C (Camera Quick-Release). The C-SP requires one camera plate for each camera and a QR-C (Camera Quick-Release). It is compatible with all Digital and 35mm Camera Rotating Brackets.

Special Order

Compare

£19.00

Find out more about the Custom Brackets Tilt Head CB

Designed for use with long telephoto lenses, the Custom Brackets Tilt Head AS includes a Custom Brackets quick release platform (plate not included). It uses separate lock and drag knobs for better control and mounts to any monopod or tripod using a 3/8-16* threaded mounting hole.

Special OrderFree delivery available

Compare

£260.00

Find out more about the Custom Brackets CMPL Camera Mounting Plate for Sony Alpha A77 and A900

The CMPL is used to mount a Sony A900 or A77 camera onto a Custom Brackets flash bracket.

Special OrderFree delivery available

Compare

£57.00

Find out more about the Custom Brackets Pan and Tilt Head with Custom Brackets Quick Release

A very compact aluminium pan and tilt head, ideal for travellers. The model features a bubble level, Custom Brackets style quick release, a captive aluminium clamp, pan/drag knobs and a black anodised finish.

Special OrderFree delivery available

Compare

£275.00

Find out more about the Custom Brackets Quick Release

This QRA-C anodised Arca Swiss style quick release can be set up for use with short or tall cameras. NB: A Custom Brackets CK-500 is also required for bracket to tripod use.

Special OrderFree delivery available

Compare

£59.99

Find out more about the Custom Brackets Lens Plate GLM-1

Quick release plate designed for use with the Custom Brackets Gimbal Head for 500-600mm lenses.

Special Order

Compare

£47.99

Find out more about the Custom Brackets FQ

The Custom Brackets FQ is a flash mounting plate for Quantum Q-Flash T2 and X2. For use with Custom Bracket camera and flash bracket combinations.

Special Order

Compare

£26.00

Top Photography Categories

Popular Brands

Cameras

Popular brands

Popular products

Lenses

Popular mounts

Filters

Popular brands

Tripods

Popular brands

Bags & Cases

Popular brands

Camera Accessories

Popular brands

Memory Cards

Popular brands

Film and Darkroom

Top Video Categories

Camcorders

Camcorder Accessories

Cine and Broadcast Lenses

Video Support

Field Recorders, Monitors & Viewfinders

Sound & Audio

Drones

Studio Production

Top Lighting Categories

Flashguns

Flash Heads & Kits

Continuous Lighting

Studio Backgrounds

Lighting Control

Studio Accessories

Top Computing Categories

Popular Brands

Printers

Popular Products

Computers

Computer Peripherals

Storage

Phones

Top Astronomy and Optics Categories

Telescopes

Telescope Accessories

Binoculars

Spotting Scopes

Hides & Trailcams

Top Used Categories

Used Cameras

Used Lenses

Used Video

Used Lighting

Used Tripods

Used Bags

Used Computing

Other Used Equipment

Refine Your Search

Refine by Price

Refine by Customer Rating:

Be InspiredFrom the Wex Blog …

How to Become a Wildlife Filmmaker | 11 Tips

London Photo Challenge

Canon Technology Development Announcement

Compare items Select up to 4 products to compare

{{item.ProductName | limitTo: 50}}

Your recently viewed items

Be Inspired
From the Wex Blog …