Optimised for use with a range of hot-light Dedo fixtures - and other heads via a Photoflex FV Connector - the Silver Dome is a versitile little softbox with removable front diffuser and inner baffle. The support rods are aluminium-tipped steel - rather than plastic - for extra durability. Stand not included.
A good choice for backgrounds and when working in tight locations, the 60mm f2.4 imager lens is a wide angle lens suitable for use with the DP1, DP2, DP3, DP2.2, DP3.1, DP1S and DP2S imagers.
A compact 30cm, silver-lined Dedolight softbox for the DLH1x150S, which aids in softening and evening the light. With the addition of a DLSR70 speedring, the softbox will also fit the DLED4, DLH4, DLHM4 and DLH200.
This rotating eight-leaf barndoor set is for use with DLH4 DLH2 and DLED4 series lights. The design features helper leaves to reduce spill light and more precisely control the light, in addition to a pair of clips for securing gels.
Find out more about the Dedo Imager Projection Attachment with 85mm Lens and Built-in Shutters for DLH4 / DLHM4 / DLED4
For use with the DLH4, DLHM4 and DLED4 series of lights, the DP1 Imager is supplied with an 85mm lens is manufactured with fixed framing shutters to provide absolute precision. The DP2.1 does not accept extra accessories but this is more than made up for with the exceptional precision it offers. Accenting and shaping can be sharp or set out of focus helping
A set of four framing shutters, for use with your Dedo DP1 or DP1.1 image projector. The shutters can be used to flag off and fine-tune sections of the light pool.
This rotating, eight-leaf barndoor set is for use with the Dedo DLED2 light.
This filter is for use with the Dedo DLH4, converting the light from tungsten to daylight; 3200K to 5000K.
For use with the DLH4, DLHM4 and DLED4 series of lights, the DP1 Imager is supplied with an 85mm lens and features a spring loaded accessory slot to accept a wide range of imaging accessories. The DP1.1 may be used with steel or Glass Gobos to which framing shutters can be added. Steel gobos can be layered so a window gobo with a leaf breakup can be used
This gobo holder accepts medium sized gobos and is for use with the Dedolight DP1 and DP1.1 image projectors.
This precision projection system will fit the Dedo 400 Series, or any other similarly-sized spotlight, enabling the sharp and controlled projection of gobo images. The universal receiver accepts a wide array of gobos and the general-purpose 185mm lens is interchangable with other Dedo projection lenses, should differing optical qualities be required.