USED Elinchrom BRX 250 Head
This Flash Head will show little use and will exhibit a few marks and often small spots of paint loss some of which will be heavier in areas such as the outer casing, screen and mount.
Shutter Count (approximately): Not available
Supplied with: White Box, Elinchrom Power Lead, Elinchrom PC to 3.5 mm Sync Cord (16'/5.0 m), Elinchrom Protective Cap for Glass Dome, Elinchrom Modelling Lamp 100w, Elinchrom Flashtube for BXRi 250/500/QuadraA
Not included: : Original Box
The Elinchrom BRX 250 Head is an update of the BXRi light and is perfect for higher workflow demands in portraiture, landscape, product and architectural photography. The concept is simple, Control, Power, Speed and Versatility. With many programmable features and the EL-Skyport remote system, the BRX enables photographers the greatest freedom to express their individuality. Incorporating new features such as EL-Skyport App control for iPhone, iPad and iPod Touch via the optional WiFi module, improved electronics and firmware update capability it is available in 500w, 250w and kit options. REFLECTOR NOT INCLUDED.
*The optional USB Transceiver RX and Skyport Software 3.0 are required. REFLECTOR NOT INCLUDED!.
What's New?
- Take full control of your units settings with the EL-Skyport App for iPhone, iPad and iPod Touch via the optional WiFi module
- Additional features can be found when used with the EL-Skyport Software* such as Flash-Delay for strobing-effects
- Firmware update option
- Improved electronics for even better performance than before
BRX Facts
- Built-in EL-Skyport receiver for triggering
- EL-Skyport with 8 Frequency Channels with 4 Groups
- EL-Skyport Speed Sync mode for synchronization up to a 1/320 s on enabled SLR cameras
- Pre-flash detector system to enable the use of BRX with speedlights
- Visual Flash Confirmation option. The modelling lamp comes on to confirm the flash has been triggered
- Proportional, maximum, minimum and independent adjustment of the modelling lamp
- Variable f-stop steps: 1/1, ½, 4/10, 1/3, 2/10 or 1/10 steps are available
- Programmable ready beep function
- Power Auto-dump
- Automatic temperature controlled ventilation
- Action flashtube for sharper images
- Multi-voltage auto-detection: 90-270 V (excluding modelling lamp)
- 5V sync socket for maximum protection of digital cameras
- High impact resistant body shell
- Accessory bayonet allowing the complete range of light modifiers
- Rubberised handgrip with built-in fuse storage
Product Specification
| Auto Dump | Yes |
| Colour Temperature [k] | 5600k +/- 150k |
| Flash Power Range | 5 Stops 16Ws to 250Ws |
| Flash Tube | 24000 User Changeable |
| Guide Number | 46.0 |
| Included Accessories | Flash Tube, Modelling Lamp, Sync Lead, Mains Lead, Protective Cap |
| Modelling Lamp | 100 Watt - E27 |
| Power Source | 90V-260V AC |
| Power [Ws|Joules] | 250 |
| Recycling Time | 0.29-0.73 Sec |
| Size [cm] | 28 x 14 x 23 cm |
| Weight [kg] | 1.90 |
| Manufacturers Link | Elinchrom |