Flash and Umbrella Mounting Accessories
9 Matching Products
The Manfrotto MN026 Lite Tite Swivel and Umbrella Adaptor is a versatile studio accessory that attaches to a lighting stand and allows you to turn and tilt the head and also attach an umbrella. It will accept an umbrella shaft of up to .47" (12mm) in diameter.
This bracket is designed to hold any shoe-mount flash unit and allow you to use it with an umbrella. It will fit on nearly any light stand with its 5/8” female mount and a reversible 3/8”, and 1/4”-20 threaded, female mount insert. The bracket's swivel joint allows you to tilt the head and umbrella up to 180°.
This universal umbrella mount makes it possible to use an umbrella with almost any flash head and light stand combination. The swivel umbrella adapter provides a 5/8" female mount both top and bottom, plus one adapter with 1/4-20 and 3/8" male threads and one with 1/4-20 and 3/8" female threads, and a locking receptacle that will hold umbrella shafts up
Transform your Speedlite into a softbox-driving, umbrella-toting, studio light with this ingenious bracket. Designed to mount any brand of Speedlite and to affix to a standard light stand fitting, the bracket holds either an umbrella or Lumiair softbox - enabling you to create diffused and even lighting effects.
Two replacement trim bands for your IC12 Light Cube - in case yours pop off.
The Lite Tight Nero fits atop of a standard lighting stand, allowing you to position your umbrella precisely where it's needed. Maximum load is 2.5kg.
The Hedler Quickfit Adapter for Hs, H, D and F Heads allows newer Hedler reflectors and softboxes to be retro fitted to existing heads.
The Hedler Flash Owl Adapter Plate allows you to use your existing Hedler reflectors, softboxes etc with a flashgun. Simply attach the flashgun to the plate behind the adapter (Sony/Minolta will require adapter product code: PBC5854) and the softbox etc to the front via the QuickFit adapter, it can then be attached to any lighting stand with a 5/8inch
The Hedler Reflex Umbrella Holder is designed for use with the Hs-, H-, DX- and F- heads only, allowing the use of Hedler umbrellas up to a maximum of 100cm.