The Godox S3 Speedlite Bracket is a universal flash bracket that holds both round-head and square-head speedlights and fits compact outdoor flash units such as the AD100, AD200, and AD300. Its lighter one-piece design makes it easy to carry and quick to set up, while the Bowens mount, umbrella mount, and adjustable tilt give smaller flash heads far more flexibility when you want to shape and direct the light properly.
Godox S3 Speedlite Bracket Key Features:
- Universal bracket fits speedlights and compact outdoor flash units
- Works with round-head and square-head flash designs
- Clamp spacing adjusts from 1.4 to 2.5 inches for different bodies
- Bowens mount accepts softboxes, reflectors, snoots, and other modifiers
- ±90° tilt adjustment gives flexible control over light direction
- Built-in umbrella mount adds another simple shaping option
- Silicone grip pad holds the flash securely and reduces slipping
- One-piece design stays quick to set up with no assembly needed
- A smaller, lighter body makes the bracket easier to carry
- Light stand fitting keeps the setup stable during use
FAQs
What types of flash does the S3 bracket support?
The S3 is designed to accommodate a wide range of Godox flash units without requiring separate brackets for different shapes. It fits round-head flashes such as the V1 series, square-head speedlights such as the V860II, V860III, and TT350, and compact outdoor units such as the AD100, AD200, and AD300. That makes it especially useful if you work across more than one flash type.
How does it hold the flash in place?
The bracket uses an adjustable clamp with spacing from 1.4 to 2.5 inches, so it can accommodate different flash sizes without feeling overly loose or awkward. A built-in silicone pad with a textured surface helps the flash sit securely, reduces slipping, and adds a bit of cushioning at the contact point. That matters when you are mounting a flash into a softbox or moving the setup around between shots.
What modifiers can I use with the S3?
Because it uses a standard Bowens mount, the S3 opens the door to a very broad range of modifiers. You can fit softboxes, standard reflectors, snoots, and other Bowens accessories without needing a proprietary adapter system. There is also an integrated umbrella mount, which makes it easy to work with shoot-through or reflective umbrellas for a quicker, lighter setup. That combination gives small flashes far more shaping control than using them bare or with clip-on modifiers alone.
Is the S3 mainly for studio use, or is it practical for on-location use too?
It makes sense in both situations, but the lighter, smaller body makes it especially useful on location. At 180.5 x 135.8 x 75.6mm and 47g, it is easy to carry without adding much weight to the kit. The one-piece design also helps because there is nothing extra to assemble when you arrive on set.
Product Specification
| For Use With | Godox V100, V860II, V860III, TT350, AD100, AD200, AD300 |
| Size [mm] | 180.5 x 135.8 x 75.6 mm |
| Type | Speedlite Bracket |
| Weight [g] | 47.00 |