Hague

28 Matching Products

Hague D5T Camera Tripod Tracking Dolly Kit

Find out more about the Hague D5T Camera Tripod Tracking Dolly Kit

The easy-to-use Hague D5T Camera Tripod Tracking Dolly Kit is designed to crate super smooth tracking shots. It includes a tracking dolly, 3 straps, 6 track connectors, and 12 metres of track. Ideal for use on location or in the studio, it features 8 radial ball bearing wheels which set the track width to the correct position, allowing the dolly to pull the track into place for smooth operation.

Special Order
£282.00

1x Hague D5T Camera Tripod Tracking Dolly Kit

This item is already in your basket

Hague D5T Camera Tripod Tracking Dolly Kit

Hague DMC DSLR Motion Cam Camera Stabilizer

Find out more about the Hague DMC DSLR Motion Cam Camera Stabilizer

The Hague DSLR Motion Cam is a handheld camera stabilising system that’s been designed specifically for DSLR cameras such as the Canon 5D and similar. DSLR cameras are very popular camcorder alternatives due to their high-quality HD Movie modes but they can be difficult to hold, especially when producing moving shots. With the DSLR Motion Cam you can create super-smooth Steadicam-type shots.

In StockFree delivery available
£132.00

1x Hague DMC DSLR Motion Cam Camera Stabilizer

This item is already in your basket

Hague DMC DSLR Motion Cam Camera Stabilizer

Hague PH Pan + Tilt Camera Powerhead

Find out more about the Hague PH Pan + Tilt Camera Powerhead

The Hague PH Pan and Tilt Power Head is ideal for still cameras and handheld camcorders. This electronic motorised Pan and Tilt Power Head is suitable for both still photography and all camcorders that weigh less than 2.7 kg.

Special OrderFree delivery available
£132.00

1x Hague PH Pan + Tilt Camera Powerhead

This item is already in your basket

Hague PH Pan + Tilt Camera Powerhead

Hague Camslide Edge Carbon Fibre Slider

Find out more about the Hague Camslide Edge Carbon Fibre Slider

The Hague Camslide Edge Carbon Fibre Slider provides filmmakers with 80cm of high-quality, smooth sliding movement for professional tracking shots. Use it on the ground, table, or tripod mounted, the lightweight Camslide Edge features adjustable feet, a spirit level, a ¼" screw and 3/8" adapter for mounting ball and video heads, an 8kg maximum load, and 6 roller bearings to ensure a smooth, ...

Special OrderFree delivery available
£198.00

1x Hague Camslide Edge Carbon Fibre Slider

This item is already in your basket

Hague Camslide Edge Carbon Fibre Slider

Hague Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

Find out more about the Hague Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

The Hague Camslide Drive carbon fibre camera slider will automatically pan the camera while you concentrate on the sliding. This ingenious design makes it so much easier to pan and slide at the same time because you only have to concentrate on the one movement.

Special OrderFree delivery available
£288.00

1x Hague Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

This item is already in your basket

Hague Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

Hague SM90 Car Camera Suction Mount With Double Ball Tilt Head

Find out more about the Hague SM90 Car Camera Suction Mount With Double Ball Tilt Head

The Hague SM90 Camera Suction Mount has been specifically designed for mounting lightweight camcorders, DSLR cameras, action cameras, and compact cameras onto a vehicle, whether inside or out. It is ideal for use on the windscreen or back window.

Special OrderFree delivery available
£60.00

1x Hague SM90 Car Camera Suction Mount With Double Ball Tilt Head

This item is already in your basket

Hague SM90 Car Camera Suction Mount With Double Ball Tilt Head

Hague MMC Mini Motion Cam
3

Find out more about the Hague MMC Mini Motion Cam

The Hague MMC Mini Motion Cam is the original small handheld camera stabiliser designed and manufactured by Hague Camera Supports in Nottingham, England. The new version of the MMC is our most advanced and exciting model incorporating a new streamlined design, the highly advanced H2 gimbal, and it now supports cameras up to 1 kg (2.2 lbs) straight out the box.

In Stock
£36.00

1x Hague MMC Mini Motion Cam

This item is already in your basket

Hague MMC Mini Motion Cam

Hague SM3 Pro Camera Suction Mount Kit For Cars

Find out more about the Hague SM3 Pro Camera Suction Mount Kit For Cars

The Hague SM3 Pro Suction Mount for cars has 3 suction pads which can be attached to any horizontal or vertical, non-porous flat surface. There are 3 adjustable brackets on the suction pads and 3 on the triangle plate, with a selection of connecting poles of different lengths so the mount can be used in a variety of positions.

Special OrderFree delivery available
£408.00

1x Hague SM3 Pro Camera Suction Mount Kit For Cars

This item is already in your basket

Hague SM3 Pro Camera Suction Mount Kit For Cars

Hague CFSLR DSLR Camframe Camera Cage

Find out more about the Hague CFSLR DSLR Camframe Camera Cage

The CFSLR Hague Digital SLR Camframe Camera Cage has been designed to hold DSLR type cameras. HD digital cameras, such as the Canon EOS 5D MK III and Lumix GH4, produce great HD video but can be difficult to hold for handheld filming.

Special Order
£45.00

1x Hague CFSLR DSLR Camframe Camera Cage

This item is already in your basket

Hague CFSLR DSLR Camframe Camera Cage

Hague K3 Mini Camera Jib Traveller

Find out more about the Hague K3 Mini Camera Jib Traveller

Small, lightweight and easy to take anywhere, the Hague K3 Mini Camera Jib Traveller is a boom device ideal for people on the go. Compatible for both DSLRs, action cams and handheld camcorders under 3kg, the Mini Jib Traveller is fastened directly to the video head of any sturdy tripod using both 1/4” and 3/8” screws and has a telescopic weight bar which can be adjusted to counterbalance the ...

Special OrderFree delivery available
£300.00

1x Hague K3 Mini Camera Jib Traveller

This item is already in your basket

Hague K3 Mini Camera Jib Traveller

Hague K8 HDV Boom Camera Jib

Find out more about the Hague K8 HDV Boom Camera Jib

Designed to support cameras that weigh up to 4kg, the Hague K8 HDV Boom Camera Jib features a camera plate mounted on a pulley, with a control cable coming down to boom to attach to a second pulley. This control cable keeps the camera level as the boom is raised or lowered. The boom arm can be mounted to any sturdy tripod, using either 1/4" or 3/8" screws, and can be used at 2 different lengths.

Special OrderFree delivery available
£396.00

1x Hague K8 HDV Boom Camera Jib

This item is already in your basket

Hague K8 HDV Boom Camera Jib

Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead

Find out more about the Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead

Ideal for lightweight cameras up to 1kg, the Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead offers full 360° movement, and is adjustable from 1.1 to 1.4 metres high. It allows users to control the underslung powerhead via the wired remote control box, which pans and tilts the camera. Two variable speed control knobs gives the head precise movement at any required speed.

Special OrderFree delivery available
£948.00

1x Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead

This item is already in your basket

Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead

Hague SM4 Double Suction Mount For Cars

Find out more about the Hague SM4 Double Suction Mount For Cars

The Hague SM4 Double Suction Mount for cars has 2 strong suction pads which can be attached to any flat non-porous surface, giving the camera mount extra stability. It has a large camera plate which supports the camera over a greater area, preventing any movement in the camera's plastic casing.

Special OrderFree delivery available
£180.00

1x Hague SM4 Double Suction Mount For Cars

This item is already in your basket

Hague SM4 Double Suction Mount For Cars

Hague DSR Dual Shoulder Camera Support Rig
4

Find out more about the Hague DSR Dual Shoulder Camera Support Rig

The Hague Dual Shoulder Camera Support Rig is ideal for both camcorders and DSLRs. It is based on the standard 15 mm x 60 mm pitch rod system, so it can be used in conjunction with other manufacturer’s components such as follow focus systems, or Hague support parts can be added to other manufacturer’s rigs.

Special OrderFree delivery available
£180.00

1x Hague DSR Dual Shoulder Camera Support Rig

This item is already in your basket

Hague DSR Dual Shoulder Camera Support Rig

Hague K14 Pro Jib

Find out more about the Hague K14 Pro Jib

The Hague K14 Pro Jib is designed for heavier cameras and capable of supporting a payload of 14kg. The K14 Pro Jib is supplied with a 100mm bowl allowing the use of 100mm bowl heads, a 75mm step-down ring is also included should you have a 75mm video head. The telescopic counterbalancing arm uses standard bar weights for counterbalance (not supplied) and all axis points have radial ball bearings ...

Special OrderFree delivery available
£480.00

1x Hague K14 Pro Jib

This item is already in your basket

Hague K14 Pro Jib

Hague D9 Table Dolly

Find out more about the Hague D9 Table Dolly

The Hague D9 Table Dolly with 75mm bowl allows you to get smooth tracking shots on a table, board or any flat surface. It features a 20kg support weight and high-quality 80mm diameter wheels with twin sealed radial ball bearings to ensure movements are quiet and smooth. The dolly will track in a straight line or it can be set to track in an arc to go round an item, it will also accept a 75mm bowl ...

Special OrderFree delivery available
£198.00

1x Hague D9 Table Dolly

This item is already in your basket

Hague D9 Table Dolly

Hague K12 Multi-Jib

Find out more about the Hague K12 Multi-Jib

Compatible with the Hague D3 Dolly or any sturdy tripod with a 100 or 75mm bowl, the K12 Multi-Jib from Hague is suitable for all cameras and will support a maximum weight of 14kg. Adjustable to three different lengths (186cm, 285cm and 396cm) and foldable down to 1.2m, the Multi-Jib features radial ball bearings to ensure smooth crane movement from ground level to up to 4m high and pan 36-°. ...

Special OrderFree delivery available
£750.00

1x Hague K12 Multi-Jib

This item is already in your basket

Hague K12 Multi-Jib

Hague K10 CamCrane Camera Jib with Stand + Powerhead

Find out more about the Hague K10 CamCrane Camera Jib with Stand + Powerhead

Quick and simple to setup, the Hague K10 CamCrane Camera Jib is suitable for all cameras under 2.5kg and comes supplied with a stand and a remote controlled, motorised pan and tilt 360° powerhead. Once balanced (standard bar weights not included), the camera can smoothly move from ground level to almost 4m high and the crane will pan 360° on the stand. You can also pan and tilt the camera ...

Special OrderFree delivery available
£540.00

1x Hague K10 CamCrane Camera Jib with Stand + Powerhead

This item is already in your basket

Hague K10 CamCrane Camera Jib with Stand + Powerhead

Hague BM100 Bowl Mount 100mm

Find out more about the Hague BM100 Bowl Mount 100mm

The Hague BM100 Bowl Mount 100mm enables a video head with a 100mm claw ball to be fastened to the mount and it can then be levelled off. At the corners of the triangle plate are 5/8" (16mm) male studs to which Angle Brackets can then be attached.

In StockFree delivery available
£55.00

1x Hague BM100 Bowl Mount 100mm

This item is already in your basket

Hague BM100 Bowl Mount 100mm

Hague K10-UPH CamCrane With Underslung Powerhead + Stand

Find out more about the Hague K10-UPH CamCrane With Underslung Powerhead + Stand

Quick and easy to set up, the Hague K10-UPH CamCrane with Underslung Powerhead + Stand is supplied with its own stand and an underslung remote controlled pan/tilt powerhead. It is able to smoothly move your camera from ground level to 4 metres high, and pan and tilt it by 360°. Suitable for cameras that weigh up to 2.5kg, this unit is battery operated and includes a wired remote control.

Special OrderFree delivery available
£720.00

1x Hague K10-UPH CamCrane With Underslung Powerhead + Stand

This item is already in your basket

Hague K10-UPH CamCrane With Underslung Powerhead + Stand

Hague K2WS Junior Jib with Stand

Find out more about the Hague K2WS Junior Jib with Stand

The Hague K2WS Junior Jib with Stand is a boom device that allows attachment of a video camera or DSLR camera (under 3kg in weight) on one end, and a counterweight and camera controls on the other. When mounted to the stand it allows the camera to grab high-angle shots from up to 2.3m and be moved vertically, horizontally, or a combination of the two. The stand has an adjustable telescopic column ...

Special OrderFree delivery available
£298.00

1x Hague K2WS Junior Jib with Stand

This item is already in your basket

Hague K2WS Junior Jib with Stand

Hague D7 Ride On Tracker Camera Dolly System

Find out more about the Hague D7 Ride On Tracker Camera Dolly System

Quick and simple to set up, the Hague D7 Ride On Tracker Camera Dolly System enables you to create super smooth tracking shots both on location and in the studio. The base of the ride is made up of an aluminium frame, and attached to this is a telescopic column with a 100mm bowl which can hold a video head. This system also features a swivel seat that allows users to move around the column.

Special OrderFree delivery available
£1,020.00

1x Hague D7 Ride On Tracker Camera Dolly System

This item is already in your basket

Hague D7 Ride On Tracker Camera Dolly System

Hague D10 Camera Skater Ladder Dolly

Find out more about the Hague D10 Camera Skater Ladder Dolly

The Hague dual-purpose Skater Ladder Dolly runs on any smooth, flat surface and the wheels can be set to track in a straight line or angled to track round an object. It also runs on a ladder to create tracking shots over any terrain.

Special OrderFree delivery available
£288.00

1x Hague D10 Camera Skater Ladder Dolly

This item is already in your basket

Hague D10 Camera Skater Ladder Dolly

Hague PH200 Pro Pan + Tilt Camera Powerhead

Find out more about the Hague PH200 Pro Pan + Tilt Camera Powerhead

The Hague PH200 Pro Remote Pan and Tilt Power Head can be mounted to a tripod, jib, crane, or wall bracket. It can be mounted vertically or underslung and it supports up to 5 kg, making it ideal for most professional handheld camcorders and DSLR cameras.

Special OrderFree delivery available
£1,200.00

1x Hague PH200 Pro Pan + Tilt Camera Powerhead

This item is already in your basket

Hague PH200 Pro Pan + Tilt Camera Powerhead

Hague K2 Junior Jib

Find out more about the Hague K2 Junior Jib

The Hague K2 Junior Jib is a boom device that allows attachment of a video camera or DSLR camera (under 3kg in weight) on one end, and a counterweight and camera controls on the other. When mounted to a tripod or similar support (not included, available separately), it allows the camera to grab high-angle shots from up to 2.3m and be moved vertically, horizontally, or a combination of the two.

Special OrderFree delivery available
£270.00

1x Hague K2 Junior Jib

This item is already in your basket

Hague K2 Junior Jib

Hague K4 Elevation Camera Boom with Dolly + Stand

Find out more about the Hague K4 Elevation Camera Boom with Dolly + Stand

The Hague K4 Elevation Camera Boom with Dolly + Stand allows you to mount a camera with a maximum weight of 1.2kg directly above a subject to observe from above. Lightweight and easily-moved, it is supplied with its own dolly, and is height and length adjustable. The telescopic arm can be moved to different positions, allowing the camera to be positioned higher or lower as needed.

Special OrderFree delivery available
£498.00

1x Hague K4 Elevation Camera Boom with Dolly + Stand

This item is already in your basket

Hague K4 Elevation Camera Boom with Dolly + Stand

Hague HDMC HD Motion Cam Camera Steadicam Stabiliser

Find out more about the Hague HDMC HD Motion Cam Camera Steadicam Stabiliser

The Hague HDMC Steadicam Stabiliser has been designed with smooth and uninterrupted footage in mind. The 5 radial ball bearing gimbal allows the user to capture excellent movement with the use of a camcorder, DSLR or Mirrorless camera system. The kit features a quick release plate meaning you can easily switch between cameras or even shooting styles at a moment’s notice.

Special OrderFree delivery available
£260.00

1x Hague HDMC HD Motion Cam Camera Steadicam Stabiliser

This item is already in your basket

Hague HDMC HD Motion Cam Camera Steadicam Stabiliser

Hague CSM Camera Shoulder Mount Camera Rig

Find out more about the Hague CSM Camera Shoulder Mount Camera Rig

The Hague CSM Camera Shoulder Mount Rig is made of aluminium which can be bent to ensure a snug fit on your shoulder. Its design allows plenty of room for the right hand to be used on the cameras controls or to focus. A handgrip below the camera allows the left or right hand to support and take the weight of the camera.

Special Order
£49.80

1x Hague CSM Camera Shoulder Mount Camera Rig

This item is already in your basket

Hague CSM Camera Shoulder Mount Camera Rig