Hasselblad Camera Accessories
24 Matching Products
Hasselblad 0.5m Release Cord H for use with Hasselblad H Series Camera bodies only. Fully Electronic release cord.
The Hasselblad BCX-1 Battery Charger is for use with the Hasselblad X-System rechargeable battery pack.
The Hasselblad Release Cord X allows for remote shutter control, helping to eliminate shake or vibration. A durable cloth-wrapped 90cm (36 in.) cable connects to the X1D-50c’s microphone input port and the remote’s simple single button operation allows photographers to keep vibration to a minimum. When autofocus is enabled on the camera, a single action
Designed specifically for use with the Hasselblad 907X, the control grip provides balance and ease-of-use. It enables you to access camera functions via the grip buttons as opposed to using the touch screen which can become difficult to use when for example, using the camera in cold conditions when you may wear gloves. The grip features four customisable
The Hasselblad X1D GPS Module integrates seamlessly with the camera via the hot shoe connection. The module uses dual satellite systems (GPS & GLONASS) for higher positional accuracy, and an improved CNR. Being hot shoe based the unit can be removed when not required, thus saving battery power. Additionally, being removable the unit can be upgraded very
The Hasselblad Battery Charging Hub supports both first-generation 3200mAh X System batteries and current 3400mAh batteries, the latter of which support quick-charging up to 25% faster than the former. This equates to a completely replenished single battery in 2 hours 18 minutes, or dual batteries in 2 hours 48 minutes.
An ultra-wide camera strap with anti-slip backing.
Molded plastic cover for battery grip CR-123A when it is not in use. Protects terminal end of grip. (H series only)
A flash sync input cable for Hasselblad V-System cameras and CFV digital backs.
A 4.5m long Hasselblad Firewire 800 to 800 cable for connecting an H3D, H4D CF or CFV to a computer's firewire port for tethered shooting or firmware updating. It will also fit the H5D, but does not support the H5D's click-lock functionality.
The Hasselblad Rechargeable 3200 mAh Battery Grip adds even more capacity to support the H6-platform of cameras. It is backwards compatible with previous generations of chargers, however, the latest generation charger offers faster recharge times.
Hasselblad Spherical Acute-Matte D focusing screen type with grid and central markings for spot (X7.5 mm) and AF metering area. Key Features* Grid provides aid in technical, architectural, and other detail photography
Hasselblad Charger 3053572 Battery Charger Li-ion 2900 for 3043356 and 3043348
A 4.5m long Hasselblad Firewire 800 to 800 cable for connecting an H5D to a computer's firewire port for tethered shooting or firmware updating. Will not fit the H3D, H4D or CFV.
The Hasselblad accessory mount cover is a replacement cover for the computer accessory port on the H1 camera.
Improves comfort and security in hand-held photography. Attaches to the grip. Can be used with tripod quick coupling H.
Global Image Locator (GIL) GPS Accessory (requires H2D, H3D, H3DII, H4D, or CF/CFH back on H2 or H2F). Enables each image to be automatically tagged with GPS co-ordinates. (Note: might not pick up a GPS when used inside.) Ideal for landscape photographers who want to record where each shot was captured.
The Hasselblad plastic cover attaches to the bottom of your camera body and is designed to protect the Hasselblad H series cameras.
Hasselblad Flash Shoe Cover for H Series Cameras.
The Hasselblad CCD Protective Cover for CCD sensor for the H3D and CF-H Digital Back.
A 4.5m long Hasselblad Firewire 400 to 800 cable, for connecting an H3D, H4D or H5D to a computer's Firewire 400 port for tethered shooting or firmware updating.
Sync cable between the CF adapter and the lens.
Battery and charger for use with CFV digital backs and H5D battery adapter.