Find out more about the Hawk-Woods GR-75K Gripper 14.4v 75Wh Battery including Single Ch Fast Charger
Designed for use on today's professional rigs/15mm bars, the Hawk-Woods GR-75K Gripper Kit is made up of the Gripper GR-75K 14.4v 75Wh Battery and Gripper GR-1C Single Channel Fast Charger. The GR-75 battery will power a 10 watt camcorder for 7 hours and features two power-con (D-Taps) outputs and an LED fuel gauge. The 2A charger is small, portable and
The Hawk-Woods VL-L1 1-Channel V-Lok Lithium-Ion Fast Charger is suitable for charging a single Hawk-Woods V-Lok or Sony V-Mount Li-Ion-type battery (not compatible with any other manufacturers). This is a low cost unit offers a compact solution as both a camera operators primary charger, or is ideal for those requiring a spare unit for backup.
The Hawk-Woods VL-CA2 V-Lock Camera Adaptor Plate offers a power-con output that is fully regulated to 12V and can be used to power any 12V equipment up to a maximum power of 35Watts. The high-quality regulator will act as a soft start when using tungsten lamps (35W Max), which will stop Li-Ion batteries from shutting down due to the power-up requirements
The high-quality, leather Hawk-Woods VL-B1 V-Lok Battery Belt features a V-Lok battery plate that allows the user to attach a single V-Lok or V-Mount type battery and utilise it as a power point. It has a single XLR4 female socket, to provide a regulated 12V power output.
Find out more about the Hawk-Woods GR-100K Gripper 14.4v 100Wh Battery including Single Ch Fast Charger
Designed for use on today’s professional rigs/15mm bars, the Hawk-Woods GR-100K Gripper Kit is made up of the Hawk-Woods Gripper GR-100K 14.4v 75Wh Battery and Gripper GR-1C Single Channel Fast Charger. The GR-100 battery is a great all-rounder and a popular choice for weight to power ratio, it features two power-con (D-Taps) outputs and an LED fuel ga
The VL-B5 from Hawk-Woods is a high-quality leather battery belt that enables users to attach V-Lok or V-Mount type batteries to it, so that it can be used as a power source when on location. Convenient and portable, it comes with two fittings, which allow the use of two V-Lok batteries. The batteries run in parallel, delivering combined wattage at nominal
The Hawk-Woods GR-75 Gripper 14.4v 100Wh Battery is specifically designed for use on today’s professional rigs/15mm bars, without the need for any additional brackets or clamps to mount the battery. The GR-75 battery will power a 10 watt camcorder for 7 hours and features two power-con (D-Taps) outputs and an LED fuel gauge.
The Hawk-Woods VL-CA7 Sony F55 Camera Adaptor is designed to meet the compact dimensions of the Sony F5/F55 camcorders. It connects between the camera and battery using the existing V-Lok mount. Along with its integrated accessory mounting bracket that is compatible with the Hawk-Woods RMH range, it features 3 x Power-Con (D-Tap) outputs.
Compact, portable and lightweight, the Hawk-Woods ST-1C Sticky Battery Single Channel Fast Charger (Power-con) charges Sticky batteries via the Tiny-Tap plug. The ST-1C charges the ST-38 Sticky battery in approximately 2 hours and the ST-75 in approximately 4 hours.
The Hawk-Woods VL-CA4 V-Lok Camera Power Adaptor features 4 x Switched Hirose Outputs and 1 x Power-Con (D-Tap) Output that is fully regulated to 12 Volts. It can be used to power any 2V piece of equipment, up to a maximum power of 35Watts. The high-quality regulator will act as a soft start when using tungsten lamps, to stop Li-Ion batteries from shutting
Use high-powered V-Lok batteries on the Sony FS7 with the Hawk-Woods V-Lok VL-FS7. The adaptor attaches to the camera via the lock-in mechanism in the battery compartment, and can finally be screwed into place atop the camera. 5x Power-Con (D-Tap) outputs 11-17V, allowing for further accessories or equipment to be powered using the VL-FS7.
Featuring the latest in cell technology, the Hawk-Woods VL-190 4.4V Lithium-Ion battery is designed for high-powered LED lighting and professional broadcast equipment, including Sony’s V-mount range. All V-Lok (V-Lock) batteries feature a built-in fuel gauge, discharge protection, short circuit protection and thermal protection. This battery will power