The standard SWIFT JIB50 kit comes with carrying cases for each included item: jib arm, tripod and dolly. All black colour, including tripod and dolly. Please note that the illustrated balance weight is not included.
The Libec REM030 Remote Head enables remote pan and tilt control of a mounted video recording unit. Comes supplied with a selection of data cables, including HDMI and LANC.
Ideal for lightweight cameras up to 1kg, the Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead offers full 360° movement, and is adjustable from 1.1 to 1.4 metres high. It allows users to control the underslung powerhead via the wired remote control box, which pans and tilts the camera. Two variable speed control knobs gives the head precise
Designed to support cameras that weigh up to 4kg, the Hague K8 HDV Boom Camera Jib features a camera plate mounted on a pulley, with a control cable coming down to boom to attach to a second pulley. This control cable keeps the camera level as the boom is raised or lowered. The boom arm can be mounted to any sturdy tripod, using either 1/4" or 3/8" screws,
Small, lightweight and easy to take anywhere, the Hague K3 Mini Camera Jib Traveller is a boom device ideal for people on the go. Compatible for both DSLRs, action cams and handheld camcorders under 3kg, the Mini Jib Traveller is fastened directly to the video head of any sturdy tripod using both 1/4” and 3/8” screws and has a telescopic weight bar which
The Hague K14 Pro Jib is designed for heavier cameras and capable of supporting a payload of 14kg. The K14 Pro Jib is supplied with a 100mm bowl allowing the use of 100mm bowl heads, a 75mm step-down ring is also included should you have a 75mm video head. The telescopic counterbalancing arm uses standard bar weights for counterbalance (not supplied) and
The Libec SWIFT JIB50 Extendable Jib comes with a padded carrying case and adjusting weight. Extendable from 100 cm to 190 cm in reach.
Compatible with the Hague D3 Dolly or any sturdy tripod with a 100 or 75mm bowl, the K12 Multi-Jib from Hague is suitable for all cameras and will support a maximum weight of 14kg. Adjustable to three different lengths (186cm, 285cm and 396cm) and foldable down to 1.2m, the Multi-Jib features radial ball bearings to ensure smooth crane movement from ground
Quick and simple to setup, the Hague K10 CamCrane Camera Jib is suitable for all cameras under 2.5kg and comes supplied with a stand and a remote controlled, motorised pan and tilt 360° powerhead. Once balanced (standard bar weights not included), the camera can smoothly move from ground level to almost 4m high and the crane will pan 360° on the stand.
Quick and easy to set up, the Hague K10-UPH CamCrane with Underslung Powerhead + Stand is supplied with its own stand and an underslung remote controlled pan/tilt powerhead. It is able to smoothly move your camera from ground level to 4 metres high, and pan and tilt it by 360°. Suitable for cameras that weigh up to 2.5kg, this unit is battery operated and
The Hague K4 Elevation Camera Boom with Dolly + Stand allows you to mount a camera with a maximum weight of 1.2kg directly above a subject to observe from above. Lightweight and easily-moved, it is supplied with its own dolly, and is height and length adjustable. The telescopic arm can be moved to different positions, allowing the camera to be positioned
The Hague K2WS Junior Jib with Stand is a boom device that allows attachment of a video camera or DSLR camera (under 3kg in weight) on one end, and a counterweight and camera controls on the other. When mounted to the stand it allows the camera to grab high-angle shots from up to 2.3m and be moved vertically, horizontally, or a combination of the two. The