Made from polypropylene, the Lee Seven5 Lens Cap protects the front lens element and keeping it clean and safe, allowing photographers to leave their Seven5 adapter ring attached to their lens at all times. This pack contains 3 Seven5 Lens Caps, all of different colours to enable easy identification of lenses whilst in the camera bag. They can also be written
The Large LensCoat Hoodie in Black helps protect the front element of your lens from dirt, dust, moisture and impact. The neoprene Hoodie fits easily and snugly around your lens hood or shade in both the shooting position or reversed. The LensCoat Hoodie features a reinforced removable front element protection disc made from rigid plastic, and firm foam
The Sony LA-EA3 Mount Adapter allows the use of Sony A-mount DSLR lenses to work with your E-mount compact system camera, such as the Sony a7 and a7R. The LA-EA3 with aperture drive mechanism enables Auto Exposure (AE) with compatible A-mount lenses (not teleconverters).
The Sony LA-EA4 Mount Adapter allows the use of Sony A-mount lenses to work with your compact system E-mount camera and includes a built-in 15 point TTL phase detection AF system and three cross sensors, so you'll always capture sharp, detailed movies and stills. The LA-EA4 is the world's first full-frame mount adapter to be equipped with Translucent Mirror
The Canon EW-73C Lens Hood for use with the Canon 10-18mm EF-S IS STM lens is designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens.
The Canon EF12II Extension Tube is used to allow a lens to focus closer than it would normally. This is accomplished by moving the lens 12mm farther away from the camera body's film plane or digital sensor by fitting between the camera body and the lens. Extension tubes are commonly used for macro photography and sometimes for close-up portraits. This updated
This JJC Rear Lens Cap / Body Cap Combo consists of a Canon EOS fit rear lens cap and SLR body cap. These are useful to have as a spare or replacement in case your original caps are lost or damaged.
The Fujifilm MCEX-11 is a macro extension tube that sits between your Fujifilm lens and Fujifilm X camera body to increase the distance between the lens elements and the sensor, enabling users to focus on subjects much closer to the camera. Constructed out of metal, the MCEX-11 features electrical connections that allow use of AF and aperture control. Compatible
Designed to enable the mounting of a Nikon F lens onto a Sony E-mount camera. This precision-crafted adapter is designed for daily use and will guarantee infinity focus. Fabricated from brass with chromium plating. Please note that this adapter does not support automatic functions such as autofocus and electronic aperture control.
The Kenko 2.0x Teleplus HD DGX Teleconverter contains a set of optics which multiply the focal length of your prime lens by 2.0x, turning a 300mm lens into the equivalent of 600mm. Teleplus HD DGX converters use unique circuitry which maintains signal integrity between the camera body and lens and it also allows accurate recording of digital EXIF data.
The Sigma USB Dock allows users to connect their Canon fit Sigma Global Vision lenses to a computer to fine-tune and adjust parameters on their lens to suit their own personal preferences. Using Sigma's Optimisation Pro software (included) you can update the firmware and configure the autofocus speed (AF), optical stabilisation (OS), and modify the minimum
The Ricoh GH-3 Adapter and Lens Hood are designed for use with the GR Digital II and GR Digital. The set includes a hood to prevent sunlight from hitting the lens and the adapter fits onto the end of the lens allowing the use of 49mm filters to be attached.