25 Matching Products
Rifa eX 88 is the largest of the Lowel Rifa eXchange family. Its diffusion screen measures 81.3 cm (32") square, making its output very soft. Use it with its supplied TH-X1000 lamphead and max. 1000 W lamp for highest output, or switch to 750 or 500W lamps for decreased output with the same level of softness.
The Lowel Tota-tilter is a constant-tension tilt bracket for mounting lightflectors, small cameras, and accessories. It has a 1/4-20 in knurled screw and fits on a 5/8” or smaller light stand stud. It also accepts 2 flex-shafts.
Made from braided steel, these safety cables from Lowel are used to securely fasten lights mounted overhead. Each cable is 34” in length (85cm) and weighs 57g.
The Lowel Tota-brella fits directly onto Tota or Omni and ViP lights without tools. It slightly softens the light output, with some specular highlights. It has a woven, heat-resistant soft-silver reflective surface.
Rifa eX 44 is the smallest member of the Lowel Rifa family of softbox lighting. Its 16" diffusion screen and 21" collapsed length make it ideal for compact kits and gun lighting.
The FLO-X3 lamp the Lowel Rifa eX is a 3 bulb 65W accessory head for the popular eXchange series of fluorescent location and studio lights. With this head screwed into the Rifa eX you get a natural, soft light, which is ideal for interviews, portraits, and indoor shooting.
The LB-40 Large Rifa Litebag has space for 2 Lowel Rifa-lites and 2 KS stands. It has interior storage pockets and is water-resistant.
Rifa eX 66 is the second largest of the Lowel Rifa eXchange family. Its diffusion screen measures 63.5 cm (25") square, making its output very soft. Use it with its supplied TH-X1000 lamphead and max. 650 W lamp for highest output, or switch to a 500 W lamp for decreased output with the same level of softness.
A heat-resistant standard diffuser for the Lowel LC-88EX Rifa-Lite.
Rifa eX 44 is one of the most popular of the Lowel Rifa family of softbox lighting. Its 21" diffusion screen and 24" collapsed length make it the preferred choice in talking head interviews and table-top lighting of smaller areas. Its 60 second set-up gets you lighting quickly, while its collapsed size allows it to fit into most of our smaller kits & cases.
A heat-resistant 40cm standard diffuser for the Lowel LC-44EX Rifa-Lite.
A heat-resistant standard diffuser for the Lowel LC-66EX Rifa-Lite.
The FLO-X1 lamp head for the Lowel Rifa eX is a 65W accessory head for the popular eXchange series of fluorescent location and studio lights. With this head screwed into the Rifa eX 66 you get a natural, soft light, which is ideal for interviews, portraits, and indoor shooting.
A heat-resistant standard diffuser for the Lowel LC-55EX Rifa-Lite.
The Lowel PRO Power LED Gel Frame is designed to attach to a Pro LED’s accessory slot. It holds 5 x 6" gels on the frame, attached by small clamps. The frame is collapsible for easy storage.
The Lowel LB-45 Small Rifa Litebag is constructed from tough polyester with a vinyl-coated backing. It accepts 2 x Rifas (44 or 55) or 1 x Rifa and 1 x Uni, Uni TO, or Uni Sr. Stand. It also features interior storage pockets.
This 4-leaved Barndoor Set for the Lowel Pro and i-Lights consists of a Barndoor Frame with 4 expandable clip-on leaves. The frame accepts swing-in accessories, and rotates around 360°.
The PRO Power LED Softbox is a collapsible accessory that quickly attaches to the PRO Power LED accessory slot to give a softer, more flattering output.
The Lowel TOTA LED Light is a modern lighting solution that will be the perfect upgrade. The lightweight and very portable light emits 4275 lux of flicker-free continuous light. It can be powered using battery or mains power, and whilst doing so, it only uses a small 70W to produce the equivalent of a 750W tungsten bulb. The LED design runs cool, fanless and is very quiet. It is daylight balanced ...
The Lowel DP Brella Standard/Silver (D2-25A) fits directly on DP to convert it to a soft shadow source. Woven, soft-silver surface. Weight: 635g, Size: 104cm (open), 82.6cm (closed).
This high-impact moulded ABS case with padded shoulder strap can be carried on-the-shoulder or in your hand. Its separate lid and adjustable straps allow for height adjustment (19.1 cm/7.5" max). Holds 2 Rifas (LC-88 or smaller), 2 KS Stands, and 1 Lampak.
These 2-way barndoors for the Lowel PRO Power LED Light have 2 leaves with expandable sections, giving maximum control of the light's output.
This high-impact moulded polyethylene case with padded shoulder strap can be carried on-the-shoulder or in your hand. Its separate lid and adjustable straps allow for height adjustment = (19.1 cm/7.5" max). Holds 3 omni-stands as well as a few accessories.
Lowel Lighting has announced a new product for their Photographic Lighting range. This is their first Photographic LED light which also incorporates a flash function (when used on Canon or Nikon cameras via Hot-Shoe).