The Pocket Wizard AC3 ZoneController allows you to control your flash set up directly from your camera's position. Simply add it to your on-camera MiniTT1Transmitter or FlexTT5 Transceiver and you instantly have three zones of flash control whether working in E-TTL II or Manual model. Put your flashes wherever you want, without worrying about having to access them during a shoot. With the AC3 ZoneController, you are in total control of your flash.Three clearly labeled dials allow you to increase or decrease power to three zones of flash in 1/3-stop increments with a range of up to six stops. Three switches allow you to change zones between Manual, Auto (PowerTracking/E-TTL II) or OFF. Best of all, the design is simple with an intuitive interface. A firmware upgrade is now available for TT1 and TT5 via the Pocket Wizard website.
PocketWizard AC3 main features
Canon E-TTL II, Elinchrom RX, AlienBees, White Lightning
Off, Manual, Auto (PowerTracking/E-TTL II)
Auto = +/- 3 stops, 1/3 stop increments
LED: Green status indicator
Above -15° C (5° F) and below 50° C (120° F)
Above -30° C (22° F) and below 85° C (185° F)
high impact plastic
No battery required. Minimal power requirements received from the MiniTT1 or FlexTT5.
2" (5cm) wide x 1.7" (4.2 cm) long x .9" (2.1cm) tall
.82 ounces (23.25 grams)
Included in the box:
AC3 ZoneController, Quick Guide
MiniTT1 Transmitter or FlexTT5 Transceiver with firmware version 5.150 (or later) needed as a host.
Back to top
- Three independent zones of flash control
- 6 stops of flash control in 1/3rd stop increments
- Works in PowerTracking/E-TTL II or Manual mode
- Turn zones on and off remotely
- Works with Canon Speedlites, AlienBees, White Lightning and Elinchrom RX flash.
- Put your flashes where you want, without worrying about accessing them during a shoot.
Back to top
||Canon EOS Hotshoe
For Use With
||50 x 42 x 21 mm