Designed primarily for use with the Quantum T3 battery utilising the locking connection (although it can also be used with other Quantum batteries) the CZ2 coiled cable connects to Canon flashguns 430EZ, 480G, 540EZ, 550EX, 580EX and 580EX II.
Designed primarily for use with the Quantum T3 battery utilising the locking connection (although it can also be used with other Quantum batteries), the CKE2 coiled cable connects to Nikon flashguns SB28, SB80, SB800 and SB900.
The Quantum Qflash Trio QF8N combines a Qflash head with built-in FreeXwire TTL radio and QTTL adapter for your Nikon digital camera. Slip it onto the camera hot shoe, connect a Turbo battery and you're ready to start shooting. The Trio's radio trigger sends TTL commands to other remote Qflash Trio's. You can configure distinct modes and settings of remote Qflash Trio's from the on-camera Trio. ...
Leave your AC studio flash at home: The Qpaq-X flash system works for both location and candid photography. Connect one or two Qflash X 400 watt-second heads and shoot in Manual, Automatic, TTL, or Strobo mode. Qpaq-X has a removable battery that is user replaceable. Select from either small or large battery modules to fit the needs of your assignment, Then add or remove PXC modules to create a ...
Shoulder strap for Quantum power packs.
A spare or replacement universal (100-240v) charger for use with the Quantum T3 Battery Pack.
The Quantum Qflash 5d-R ("d" for digital and "R" for Ratio) is the latest evolution in Quantum's proven Qflash portable flash line. The new 5d-R series used with Quantum's FreeXwire digital radio system, now support wireless control of all dedicated camera-flash functions-Manual, TTL, Auto, Auto-fill and TTL-Ratio-up to 500 ft. away!
The Quantum MKZ3 is a connecting cable for the Quantum Battery 1+ (QB1+) Quantum Battery 1 Compact (QB1c) and Quantum Battery 1 (QB1) batteries with the Sunpak PZ5000AF, Nikon SB Series (excluding SB600), Metz 54MZ-4. 54MZ-3 Canon, Minolta Maxxum & Contax Flashes.
Quantum Instruments MB2 Dedicated Module (Connection Cable) to connect to Quantum QB1+ or QB1c Battery Packs.
The Quantum Qflash Trio QF8C combines a Qflash head with built-in FreeXwire TTL radio and QTTL adapter for your Canon digital camera. Slip it onto the camera hot shoe, connect a Turbo battery and you're ready to start shooting. The Trio's radio trigger sends TTL commands to other remote Qflash Trio's. You can configure distinct modes and settings of remote Qflash Trio's from the on-camera Trio. ...
The Quantum CD-1 is for use with Nikon cameras, allowing connection to the Turbo and Turbo 2x2 battery packs.
This Quantum locking module and short cable enables the use of the Bantam or Battery 1 Compact (QB1c) battery pack with the Canon 540EZ, Canon 550EX, Contax TLA360, Metz 54MZ3, Minolta 3600HS(D), Minolta 5600HS(D), Nikon SB24, Nikon SB25, Nikon SB26, Nikon SB27, Nikon SB28 (EURO), Nikon SB28 (NON-EURO), Nikon SB28D, Nikon SB28DX, Nikon SB29, Nikon SB80DX, Nikon SB800AF, Sunpak PZ5000AF and ...
The Quantum CQ8 Power Cable is a dedicated short coiled power cord for use with the Quantum Turbo battery to power Trio and Pilot shoe-mounted Qflashes for Nikon, Fuji and Canon digital cameras.
The Quantum MG2 connection cable will allow a QB1+ or QB1c battery pack to power the following flashes . . . .
Diffusing UV filter kit for Qflash. Using a single diffuser reduces light output by 2/3 stop. Two diffusers will reduce light output by 1 1/3 stop. The more diffusion, the softer the light and softer shadows. The Qflash compensates for this in both automatic and TTL modes.
Quantum YDC30 camera connection cable. For connection of Turbo Compact Battery with Canon EOS D30, D60, D2000, 5D, 10D, 20D & Digital Rebel Series Cameras.Manufacturer part number: QUYDC30
This flashtube is UV-Coated, or UV-Corrected. UV flashtubes have a yellow appearance, and they counteract the excess blue 5700° or higher output of non-UV coated flashtubes. UV Coating lowers the colour temperature to 5500°, which is the colour of noon daylight on a clear day.
Replacing the Turbo 2x2, the Quantum Turbo 3 Battery has two outputs allowing you to simultaneously power a digital camera and a flash or 2 flashes, providing up to 50% more full power flashes than its predecessor. The new locking flash cables for Nikon, Canon and Qflash TRIO can be secured with the locking sockets of the Turbo 3 whilst all other cables can still be used It utilises nickel metal ...
Quantum QF51 Male / Female Extension Cable. 6m (19.5 foot) length. To extend QF21, QF50, QF52, QF53, or TTL adapters. Maximum control length possible is 30m (100 feet), using 5 QF51 cables.
The wide-angle diffuser for the Qflash offers a 90° angle of lighting
This 50cm long Turbo Compact cable is for use with the Nikon SB-28, SB-80DX, SB-28D, SB-28DX, SB-800, SB-80DX, SB-900, and SB-910 flashguns.
Quantum's Energy Saver improves the efficiency of alkaline AA batteries for some flashes that require AAs when using the Turbo Batteries. The Energy Saver is the size and shape of an AA battery. It substitutes for one of the alkaline batteries in the flash battery compartment: If a flash normally required 4 AAs when used with the Turbo, insert just 3 AAs and the Energy Saver. The result will be ...
Use Quantum's Freewire 2-Step Motor Drive Cords to keep your camera meter and focus function continuously "on" (as in pressing the shutter button half-way). Your camera will be ready for instant shutter release. Or, select motor drive "delay" to command a camera to "wake up", focus and meter, then release the shutter.
Quantum 18 inch / 45cm PC sync cable.
With the new Quantum Mini Folding Softbox QF69, shoot up-close and personal without the worry of over-exposing your subject. Replace the reflector of a Qflash 4d, 5d or 5d-R with the included Hot Spot Reducer and then slip on the Mini Folding Softbox QF69 for very soft, diffused lighting. The Mini Folding Softbox QF69 gives close to a 180o light spread for use with very wide angle lenses. It's ...
This Turbo Compact cable is for use with the Metz 45CL1, CL3, CL4, CT3 and CT4 (not CT1 or CT5) flash units.
Spare or replacement High Performance Battery for the QPAQ-X Command Module.
The Quantum Turbo SC Battery Pack ("S" for Slim and "C" for Compact) — the smallest and lightest battery in the Turbo range — provides typical all-day flash shooting capacity like the standard Turbo. With its high performance and minimal bulk, it can be slipped into a pocket, or secured by its detachable belt clip to boost the performance of hotshoe and hammerhead type flash units - or even a ...
This Quantum locking module and short cable enable the use of the Bantam or Battery 1 Compact (QB1c) battery pack with the Nikon SB-600 Flash.
Quantum have a vast amount of experience when it comes to radio slaves, having been a leading supplier of analogue radio remote tranmitters and receivers for photographic use.The current generation is the FreeXWire, which comprises a number of radio slave tansmitter and receiver units, along with a selection of accessories and cables to allow them trigger almost any flash unit or camera that can ...
UK Mains charger for Turbo Compact and Turbo Slim Compact Battery Pack
Quantum Multiclip Belt Clip.
The Quantum Video Rail Mounting Bracket is an aluminium L-type bracket made for Quantum Omicron 3 and Omicron 8 ring lights. It has a bottom ¼”-20 thread and two 15mm rail mounts, each with a tightening knob.
The Quantum QB8 Battery is a dedicated rechargeable battery pack designed to power the OM4 Video Ringlight using the optional OM43 connecting cable. Fully charged, the battery can run the OM4 at full power for around 2 hours. The QB8 is supplied complete with charger, strap and belt clip.
The Quantum Qflash Trio Basic is a lower priced and specified version of the Trio (it doesn't include the built-in FreeXwire TTL radio), combining a Qflash head with a QTTL adapter for studio quality light and full dedication with your Canon DSLR. Slip it onto the camera hot shoe, connect a Quantum Turbo battery and you're ready to start shooting.
Designed to work with all Quantum QFlash, regardless of age, the Quantum 26inch Octagonal Softbox creates beautiful and even light, perfect for portraiture, fashion, children, glamour and product photography, on location or in the studio. The Octagon Softbox is lightweight, quick to erect and easily collapsible. It includes a soft silver interior, which creates a highly efficient and even light ...
Quantum FreeXWire Digital Set, includes FW9T, FW8R, 434sync cord, mounting kit, batteries and instructions.Transmitter FW9T - Simple Operation - Match up the FW9T with a FW7Q, FW8R or an upgraded FW10w Transceiver. You can set up sets of FreeXWire units to work together on the same channel, or separate groups of FreeXWires to work in independent channels. Each channel has an additional four ...
This Quantum connecting cable enable the use of the Bantam or Battery 1 Compact (QB1c) battery pack with the Contax 645-AF flash.
Totally cordless, the FW7Q mounts flush to a Qflash 4d or 5d, and requires no batteries. Mount an FW9T or FW10/10w transmitter and FW12 Hot Shoe Adapter to the camera and be totally wireless. You can also add a D or Dw series QTTL adapter between the FW9T Transmitter and the camera and transmit your camera's f/stop, ISO, and TTL exposure information to the remote Qflash 5d.
This Quantum cable enables the use of the Bantam or Battery 1 Compact (QB1c) battery pack with Fuji FinePix S602, S3000, S5000, S7000, S20 Pro, S1 Pro, S2 Pro, Kodak DC-4800, Minolta Dimage RD 3000, 5, 7, 7i, S404, A1, A2 and Sigma 9 digital cameras.
The Quantum ME4 connection cable will allow a QB1+ or QB1c battery pack to power a Metz 40MZ-series flash.
The Quantum QT46 is the vehicle charger for the standard model Turbo battery.
Connecting cable to attach either the Quantum Turbo 3 or Turbo 2x2 batteries to the Canon EOS 5D MKII or 7D.
This is a Replacement UK AC mains charger for use with the Quantum Battery 1+ and Quantum Battery 1 Compact.
This transmitter is easy to operate, and offers great value. Match it up with an FW7Q, FW8R, or an upgraded FW10w Transceiver. You can match sets of FreeXWire units to work together on the same channel, or separate groups of FreeXWires can work independently on different channels.
Most current, professional flash heads and monolights are equipped with user replaceable flashtubes that may simply be plugged into, and unplugged from their sockets. With proper handling, these flashtubes may last for tens of thousands of flashes under normal use.
Quantum Qnexus is the ultimate wireless bridge to link a Quantum Qflash with a Canon or Nikon wireless flash system. The Qnexus is a plug-in receptor compatible with Canon or Nikon infrared (IR) code beamed wirelessly. When mounted to a Qflash5d-R, manual, automatic, TTL, and TTL-Ratio, flash modes are accepted by the Qnexus. This wireless system allows a user to seamlessly command and group, one ...
The Quantum Qflash Trio Basic is a lower priced and specified version of the Trio (it doesn't include the built-in FreeXwire TTL radio), combining a Qflash head with a QTTL adapter for studio quality light and full dedication with your Nikon DSLR. Slip it onto the camera hot shoe, connect a Quantum Turbo battery and you're ready to start shooting.
The CD30 connector is for use with the Quantum Turbo and Turbo 2x2, connecting it to Canon EOS D30, D60, 5D, 10D, 20D, 30D and Digital Rebel cameras.
This is a snoot for pinpoint placement of the light from a Quantum T4D Qflash head. Use of a snoot will result in a small circle of light, when it is attached to the front of your light source. The size of the circle of light will be determined by the opening of the snoot, its length, and the distance of the subject. Consider them as a painter would a brush, or a sculptor would a knife, or chisel.
The Quantum Camera Bracket is designed for use with the Quantum Omicron 3 Ringlight and is adjustable in both height and distance, enabling use with a variety of DSLR plus lens set-ups, as well as video cameras.
This Quantum locking module and short cable enables the use of the Bantam or Battery 1 Compact (QB1c) battery pack with the flashes listed under 'further details'.
This Quantum locking module and short cable enable the use of the Bantam or Battery 1 Compact (QB1c) battery pack with the Metz 32Z series flash.
The Quantum ES1 Energy Saver is the size of a AA battery, and instead of using 4 AA alkaline cells in the battery compartment of certain specific flashes, you would insert 3 AAs and the Energy Saver. The ES1 is compatible with the Vivitar 285HV, Metz 45CL-1/3/4, 45CT-3/4, and Hasselblad 4504.