Replacement Lamps and Flashtubes
This Modelling Lamp is a generic 100w replacement bulb for use with the Elinchrom flash heads including D-Lite and BRX models.
A replacement 275 Watt, 220/240 Volt modelling lamp (No.1 Photoflood) with E-27 screw-type fitting for Bowens. Suitable for the 400Rx (and similar) heads.
Find out more about the Interfit 250W Modelling/Replacement Lamp for 600/1000w flash heads and 750w Tungsten Heads
This is an INT500 Modelling or Replacement Lamp for 600/1000w flash heads and 250/750w Tungsten Heads, including the INT155, INT156, INT157 and INT158. Care should be taken when installing as fingerprints will decrease the lifespan of the bulb.
Designed for easy installation, this spare or replacement flash tube works with the Bowens XMT flash heads. This tube emits a 5600K light.
Replacement 5A Fuse for Bowens 250/500 Flash Heads
A spare or replacement flashtube to fit the Elinchrom D-Lite One, 2 and 4 heads and the Ranger Quadra S head.
A replacement (2-leg) clear flashtube for Bowens Gemini heads. Compatible with the following models Esprit Gemini GM500, Esprit 250, Esprit 500, Esprit Gemini GM250, Esprit Gemini 125, Esprit Digital DX500, Esprit Digital DX250
Spare or replacement flashtube for the Elinchrom BXRi 250, 500 or Quadra A studio flash heads.
Replacement 205W Halogen 230V ES27 fitting modelling lamp for use in Bowens studio flash heads. (This model with clear glass replaces the previous frosted/pearl version and although a lower wattage produces the same light output with a slightly lower current requirement)
Bayonet fitting protective hood for Elinchrom heads. Helps protect your head from damage when not in use, and keeps the dust off, too!
Spare or replacement flash tube for Elinchrom RX 300 and 600 heads.