Rigs and Cages for DSLR Sized Cameras
The SmallRig Cage (2050) is a formfitting cage with Top Handle specially designed to house the Panasonic Lumix GH5 compact system camera. The cage provides additional stability and protection, as well as plenty of ¼" and 3/8" threaded holes for creating the perfect rig setup. All camera controls and compartments are accessible.
The SmallRig 1135 Double End Ball Head with Cold Shoe Mount and a ¼” Thumb Screw is a Multi-Function Double Ball Head on both ends with shoe adapter and 1/4" screw. It can mount Monitors and LED Lights to DSLRs, 180º Articulation. It also has a 1/4"-20 screw on top. The SmallRig 1135 Double End Ball Head can be mounted directly to a DSLR or camcorder's
The SmallRig Mount for Samsung T5 SSD – 2245B is a dedicated mount that works with SmallRig Cage for BMPCC 4K & 6K 2203, CVB2254 and CVB2255, and SmallRig Cage for Z cam E2 2264. The user can fix it to the cage via two M4 screws. The available knob screws are designed to lock the T5 SSD and its USB-C cable in place. It is also worth noting that the mount
A form-fitting SmallRig Cage designed for the Atomos Ninja V HDMI Monitor/Recorder. The SmallRig Cage was co-designed with Atomos to provide an additional protective exo-skeleton for the monitor, with a wide range of industry standard mount points. The cage mounts to the monitor by a 1/4"-20 screw on the top and two M3 screws on the left side.
The SmallRig Cage for BlackMagic Design Pocket Cinema Camera 4K/6K is a form-fitting cage that is secured with a 1/4"-20 screws on the top and bottom. Additional locating pins and rubber pads are also in place to guard against wiggles and scratches. There are also built-in NATO rails located on the top and left side of the cage. These can be used to attach
This lens support system is perfect for long lenses and is compatible with any industry-standard 15 mm rod system. It helps to create a more stable, vibration-free platform for shooting. The Y-shaped lens support screws onto the 15 mm rod clamp of a lens while shooting. There are 2 rubber washers to prevent the finish on your lens from wearing.
This easy plate provides 1/4''-20 and 3/8"-16 threaded holes in standard spacing (9 mm centre to centre). It can be mounted on SmallRig railblocks, dovetails, and short rods. It works as a switching plate when attached to the bottom of a DSLR cage.
The SmallRig Cage (2049) is a formfitting cage specially designed to house the Panasonic Lumix GH5 compact system camera. The cage provides additional stability and protection, as well as plenty of ¼" and 3/8" threaded holes for creating the perfect rig setup. All camera controls and compartments are accessible.
The aluminium Movcam Cage has been designed specifically for the Sony A7 II, A7R II, and A7S II mirrorless cameras to provide additional stability, protection, and mounting options. The cage features ¼"-20 threaded accessory threads on the top and sides, a shoe mount, and a mounting interface for an optional quick-release riser block, whilst still allowing
The SmallRig HDMI Cable Clamp can provide strain relief for HDMI cables where frequent tugging could cause damage to the camera. With only 1 screw to mount to the cage and lock the cable, it can save space for other accessories.
The SmallRig Lens Mount Adapter Support for BMPCC 4K/6K – 2247 has been designed to work with SmallRig BMPCC Cage 2203, CVB2254, and CVB2255. The user can mount it directly to the cage via two M4 screws, and lock the Lens adapter via 1/4 screw. This mount adapter prevents loss of signal in addition to supporting the lens adapter and relieving the pressure
Manfrotto and Wooden camera have teamed up to produce a range of high-end camera cages aimed at independent filmmakers who use DLSR or Mirrorless systems. The cage features a minimalist design, made from solid, lightweight metal with a wooden handle, while an adjustable top plate ensures a snug fit for most rigs. The cage also features a clamp for HDMI