Rode NTG1 Condenser Shotgun Microphone
Product Code: 1020158

Rode NTG1 Condenser Shotgun Microphone

Awaiting Stock
Sorry, there's no stock right now. You can still order and take advantage of today's price/offer, placing you on a waiting list fulfilled first-come, first-served. No payment is taken until the item is in stock and ready to be despatched. Full details »
was: £219.00 £199.00

1x Rode NTG1 Condenser Shotgun Microphone Sorry, there are no more available.

Please Login or Register to add to your Wish List.

Finance options available


Rode Dead Cat

Usual price £37.00
Back to top

The RODE NTG-1 is a lightweight condenser shotgun microphone, specifically designed for professional applications within the film, video, television, voice-over and ENG industries. The NTG-1 provides an electronically balanced output stage and operates on 48 V to the P48 standard. The NTG-1 offers wide bandwidth and a controlled polar response coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it ideal for mounting directly to video cameras (with optional accessories) or a Boom pole.The NTG-1 comes complete with mount and windshield. The supplied windscreen effectively suppresses wind noise when recording outdoors in moderate conditions. Optional accessories are available for more demanding applications

Operation power: The NTG-1 is designed to operate from standard P48 phantom power. The NTG-1 will operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the output XLR connector.

Operation output impedance: The NTG-1 will operate satisfactorily into a load impedance as low as 1 kU. If a load below this is used, the output signal level will be reduced. The NTG-1¡ s output is balanced between pin 2 (hot), pin 3 (cold) and pin 1 is ground.

  • Acoustic principle: Line plus Gradient
  • Directional pattern: Super-Cardioid
  • Frequency range: 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
  • Output impedance: 50 Ù
  • Signal noise ratio din iec 651: 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
  • Equivalent noise: 18 dB SPL (per IEC651, IEC268-15)
  • Maximum spl: 139 dB (@ 1% THD into 1 kÙ)
  • Sensitivity: -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
  • Dynamic range din iec 651: 121 dB (per IEC651, IEC268-15)
  • Power supply voltage: P48 Phantom, 44 V to 52 V
  • Current consumption: 3.5 mA
  • Output connection: 3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
  • Weight with battery: 105 g approx. (3.37 oz.)
  • Dimensions width: 217mm
  • Dimensions depth: 22mm
  • Dimensions height: 22mm
  Back to top

Product Specification

For Use With Professional film, video, television, voice-over applications
Pick-up pattern Cardioid
Size 217 x 22 x 22 mm
Type Shotgun
Weight [g] 105.00
Back to top
Back to top
Back to top
Product Code: 1020158-wex Manufacturers Part Number: NTG1