10 Matching Products
The Rosco LitePad Anton/Bauer Adapter will enable the LitePad to plug directly into any power supply with an Anton/Bauer (12VDC) connector. The connections are a female 2.1mmx5.5mm barrel to male Anton/Bauer and the maximum load is 12v DC 5Amps.
The Rosco LitePad AA Battery Holder can power any LitePad up to 12"x12" in size. The Rosco LitePad AA Battery Holder accepts eight AA batteries (not included).
The Rosco LitePad 4-Way Splitter allows for up to four LitePads to be plugged into one power supply. Be sure the maximum amperage of the power supply is not exceeded when combining LitePads.
The Rosco LitePad Extension Cable enables the LitePad to be placed up to 3m farther away from the transformer.
The Rosco AA Battery Kit has everything you'll need to attach the AA Battery Holder (batteries not included) to the bottom of the LitePad Loop Mounting Assembly. NOTE: The 4" L-Bracket is required to use this part.
The Rosco LitePad 4-Pin Adapter Cable will enable the LitePad to plug directly into any power supply with a 4-Pin (12VDC) XLR connector. The connections are a female 2.1x5.5mm barrel to male 4-pin XLR and the maximum load is 12v DC 5 Amps.
Find out more about the Rosco LitePad Axiom Battery Holder Bracket Attachment (for AA Battery Holder)
The Rosco LitePad Axiom Battery Holder Bracket Attachment (for the AA Battery Holder) allows the LitePad AA Battery Holder to be attached directly to any of the LitePad Axiom mounting brackets (Works with Axiom 1/4-20, baby pin, 5/8th receiver and wall plate bracket).
The Rosco LitePad Single Fader Dimmer is a compact thumb dimmer that allows the smooth dimming of any standard size LitePad with no change in the colour temperature. Maximum load is 4 amps (48 watts) and input/output is 12v DC.
The Rosco LitePad 2 Channel/DMX Dimmer allows the dimming of two LitePads or two groups of LitePads via slide faders or DMX protocol. It has a maximum load of 5 amps (60watts) and input/output is 12v DC.
The Rosco LitePad's 10ft Extension Cable enables the LitePad to be placed farther away from the transformer.