SmallRig Bi-Color LED Video Light for DJI Osmo Pocket 3 5733
Designed specifically for the DJI Osmo Pocket 3, the SmallRig Bi-Colour LED Video Light clips cleanly onto the camera and delivers a 360-degree, movable beam you can nudge into place with one hand. It’s small enough not to upset the Pocket 3's balance, yet bright enough to lift a face or add shape in tight indoor spaces. With colour temperatures from 2700K to 6500K and passthrough charging, it stays practical for longer handheld runs.
Key Features:
- Clips securely to Pocket 3 and rotates through 360 degrees
- CCT mode offers 2700K to 6500K colour settings
- Five brightness steps adapt quickly to mixed lighting
- Delivers 480 lux at 1 metre with CRI 95 accuracy
- Runs for 60 minutes with an in-built 650 mAh battery
- Supports passthrough USB-C charging for continuous use
- Light 42 g build stays balanced on the Pocket 3
- Passive cooling keeps the operation silent during filming
What's in the box?
- 1 x SmallRig Bi-Colour LED Video Light for DJI Osmo Pocket 3
- 1 x USB-C to USB-C Cable (20 cm)
FAQs
Does the light stay secure when the camera is moving?
Yes. It clips directly to the Pocket 3’s body and stays firmly in place during everyday handheld use. Because it weighs only 42 g, it doesn’t shift the camera’s balance or stress the gimbal.
How flexible is the colour control?
CCT mode offers five stepped temperatures from 2700K to 6500K, covering warm indoor tones through to daylight. It’s straightforward to match surrounding light or soften mixed-light situations.
Can the light run while charging?
It can. Passthrough charging keeps the light on even when the internal battery is out of charge, which helps during longer takes or when working from a power bank.
Is it bright enough for close-up work?
For short-range Pocket 3 shooting, it’s very usable. At about a metre, you get roughly 480 lux, and the CRI 95 output keeps skin tones looking natural.
Does the light produce any fan noise?
No. It uses passive cooling, so it stays silent and doesn’t interfere with the Pocket 3’s built-in microphones.
Back to topProduct Specification
| Accessory Power Connections | USB-C (power input only) |
| Connections | 1 × USB-C power input |
| Controlled Rotation Range | 360° |
| Dimensions | 56 × 52 × 27 mm |
| Included Accessories | 1 × USB-C to USB-C Cable (20 cm) |
| Input Power | 5 VDC at 0.5 A |
| Operational Modes | CCT mode (2700K / 3200K / 4400K / 5600K / 6500K) with 5 brightness steps |
| Supported Camera Dimensions | DJI Osmo Pocket 3 |
| Weight | 42g |