SmallRig Side Handle with 1/4 -20 Screws 4015
The SmallRig Side Handle with 1/4"-20 Screws is a universal left or right camera handle for rigs with two 1/4"-20 mounting points spaced 18mm apart. Once fixed to the cage, the aluminium handle gives a second carrying solution for steadier movement, while 36mm vertical adjustment lets the grip sit where your hand naturally meets the camera body.
SmallRig Side Handle with 1/4 -20 Screws Key Features:
- Universal side handle mounts to the left or right side of the camera cage
- Fits two 1/4"-20 threaded holes with 18mm spacing apart
- Two stainless steel 1/4"-20 screws secure the handle firmly
- 36mm vertical adjustment sets the grip height to suit the camera size
- 15kg load capacity supports heavier cage and accessory setups
- Aluminium alloy body gives lightweight strength without adding excessive weight
- Silicone grip pads reduce slipping and improve comfort in cold conditions
- 1/4"-20 anti-twist thread supports accessories with firmer alignment
- Built-in cold shoe holds microphone, light or compact monitor accessories
- Strap slots enable wrist or hand strap attachment
- Magnetic Allen wrench stores inside for fitting and adjustment
- 205g handle measures 10.5 x 7.2 x 6.9cm
FAQs:
What camera rigs does the SmallRig side handle fit?
The handle fits camera cages or rigs with two 1/4"-20 threaded holes spaced 18mm apart. It attaches with two included stainless steel 1/4"-20 screws, so the load spreads across two fixing points. This gives the handle a firmer connection when you lift, pan or carry the rig between setups. The design can mount on either the left or right side of the camera cage.
How does the vertical adjustment work?
The handle can move up or down through a 36mm adjustment range before you tighten it into place. This lets you match the grip position to the height of the camera body, cage and lens setup. When the handle sits at the right height, your wrist stays straighter, making the camera feel less awkward during handheld movement. It is a small adjustment, but it changes how the rig sits and feels in the hand.
What accessories can be mounted to the handle?
The handle includes a 1/4"-20 threaded hole, a 1/4"-20 locating hole, a built-in cold shoe and strap holes. The cold shoe can hold accessories such as a small LED light, a microphone or a monitor mount. The anti-twist 1/4"-20 mounting point adds a locating contact, so compatible accessories are less likely to rotate loose during movement. Strap slots also let you add a hand or wrist strap for extra security.
What is the handle made from?
The main handle body is made from aluminium alloy, with steel screws and silicone pads on the grip contact area. The aluminium gives the 205g handle the lightweight stiffness needed for supporting camera movement, while the silicone creates a softer contact point against the palm. The silicone pads also reduce slipping and feel less harsh in cold conditions.
Can this handle help with steadier handheld shooting?
Yes. Adding a side handle gives your second hand a fixed place to hold the camera rig. That wider hand position makes slow pushes, pans and walking shots easier to manage. The 15kg load capacity means the handle can support heavier cage builds within the supplied limit. While not stabilised electronically, it gives your hands more control over the physical movement.
Product Specification
| Compatible With | 1/4"-20 thread |
| Type | Handle |