Sony NP-SA100 Z-series Battery Pack
Free delivery
The Sony NP-SA100 is a 2670 mAh rechargeable Li-ion battery, offering approximately 17% higher capacity than the NP-FZ100. Designed to support newer cameras with AI processing, global shutters, and high-resolution video, the larger cell delays voltage drop, so you can keep shooting for longer before swapping batteries. The updated design also supports battery health checks with compatible cameras and chargers, providing a clear readout of the battery's condition as it ages.
Sony NP-SA100 Battery Pack Key Features:
- High-capacity Li-ion battery designed for next-generation Sony cameras
- 2670mAh capacity increases runtime compared to previous NP-FZ100
- Delivers stable voltage during sustained high-load shooting conditions
- Supports fast charging to reduce downtime between sessions
- Internal design handles increased power draw from AI and 8K processing
- Supports battery health checks on compatible cameras or chargers
- Lightweight 89g compact battery pack measures 24.6 x 38.4 x 51.8 mm
FAQs:
How much longer does the NP-SA100 last compared to the NP-FZ100?
The NP-SA100 increases capacity from 2280mAh to 2670mAh, which translates to an approximate 17% gain. In practice, the camera draws power for longer before the voltage drops to the cutoff point. The exact difference depends on how the camera is being used, but it reduces how often you need to stop and change batteries, especially during video or continuous shooting.
Does the higher capacity affect camera performance?
Yes, in a practical sense. As newer cameras pull more current for features like AI processing and high-resolution recording, smaller batteries can dip in voltage under load. The NP-SA100 maintains a steadier output, so the camera is less likely to reduce performance or shut down unexpectedly during intensive use.
How does the battery health check work?
Compatible Sony cameras and chargers read the internal battery condition and report it as Good, Slightly deteriorated, or Deteriorated. As lithium cells age, their ability to hold a charge drops. This check gives a clear indication of when the capacity has reduced enough to risk shorter runtimes or sudden drop-offs, so you can replace the battery before it becomes unreliable.
Is the NP-SA100 physically different from the NP-FZ100?
Yes. The dimensions shift slightly to accommodate the larger internal cell structure, and the weight increases from around 83g to 89g. In hand, the difference is minimal, but internally it allows for the higher energy density needed to support power-hungry cameras.
How long does the battery take to charge with the Sony BC-SAD1 Battery Charger?
Using Sony’s BC-SAD1 Battery Charger, a single NP-SA100 battery takes approximately 85 minutes to fully charge. If you only need a working level, it reaches around 80% in about 55 minutes, which is often enough to get back to shooting quickly. Charging two batteries at once takes roughly 115 minutes, as the charger splits power between both cells.
Product Specification
| Capacity | 2670 mAh |
| Type | Spare Sony |