34 Matching Products

Wimberley Head Mk II
5.0

Find out more about the Wimberley Head Mk II

The Wimberley Head WH-200 MK II is a specialised tripod head for telephoto lenses. Its gimbal-type design allows rotation of a lens around its centre of gravity. Very large lenses are thus easily manipulated. Since its introduction in 1991, the Wimberley Head has become the industry standard for serious nature photographers with heavy telephoto zoom le

In StockFree delivery available
£565.00

1x Wimberley Head Mk II

This item is already in your basket

Wimberley Head Mk II

Wimberley P20 Quick Release Plate
5.0

Find out more about the Wimberley P20 Quick Release Plate

Wimberley P20 Quick Release Plate. One a line of Arca-Swiss style quick-release plates for collared lenses. These plates have important innovative features that distinguish them from other plates on the market. Lens feet with larger 3/8" mounting holes require insertion of a 3/8" to 1/4" reducer bushing to fasten plates using these holes.

In StockFree delivery available
£58.00

1x Wimberley P20 Quick Release Plate

This item is already in your basket

Wimberley P20 Quick Release Plate

Wimberley The Plamp Stake

Find out more about the Wimberley The Plamp Stake

The Wimberley Plamp Stake consists of two components, the Ground Stake and the Extension Tube. It can be anchored in a wide variety of ground types creating a stable stand-alone support for the Plamp that is isolates your subject from any unwanted vibrations or movement from either your tripod or camera. The modular design means the Spike can be reversed

In Stock
£27.00

1x Wimberley The Plamp Stake

This item is already in your basket

Wimberley The Plamp Stake

Wimberley C-12 Clamp
5.0

Find out more about the Wimberley C-12 Clamp

The Wimberley C-12 Clamp replaces the C-10 clamp. The geometry of the central mounting holes, combined with the large selection of fasteners that are included with the C12 clamp allow you to securely attach the clamp to a much wider variety of equipment than any other clamp currently on the market. It is important that you use the removal and installation

In StockFree delivery available
£89.00

1x Wimberley C-12 Clamp

This item is already in your basket

Wimberley C-12 Clamp

Wimberley P30 Quick Release Plate
4.5

Find out more about the Wimberley P30 Quick Release Plate

Wimberley P30 Quick Release Plate. One a line of Arca-Swiss style quick-release plates for collared lenses. These plates have important innovative features that distinguish them from other plates on the market. Lens feet with larger 3/8" mounting holes require insertion of a 3/8" to 1/4" reducer bushing to fasten plates using these holes.

In StockFree delivery available
£58.00

1x Wimberley P30 Quick Release Plate

This item is already in your basket

Wimberley P30 Quick Release Plate

Wimberley P-5 Camera Body Plate
5.0

Find out more about the Wimberley P-5 Camera Body Plate

The Wimberley P-5 Camera Body Plate is designed to fit almost all cameras and features a thin layer of dense, textured rubber on its top surface. This coating grips the bottom of your camera, but is so dense and thin that it maintains the solid feel of a metal-to-camera connection. Beneath the rubber, the top surface of the plate is machined to ensure that

In StockFree delivery available
£58.00

1x Wimberley P-5 Camera Body Plate

This item is already in your basket

Wimberley P-5 Camera Body Plate

Wimberley Sidekick
5.0

Find out more about the Wimberley Sidekick

At 1.3 pounds and small enough to be easily packed, the Sidekick converts your ball head into a gimbal head in seconds: Simply slide the Sidekick into the quick-release of your ball head. The Sidekick's elevated tilt mechanism and side-mounted quick release allow the lens to rotate around its centre of gravity. This provides the same action and ease of

In StockFree delivery available
£265.00

1x Wimberley Sidekick

This item is already in your basket

Wimberley Sidekick

Wimberley P50 Quick Release Plate
5.0

Find out more about the Wimberley P50 Quick Release Plate

Wimberley Quick Release plates are renowned for their quality and important innovative features, which distinguish them from other plates on the market.

In StockFree delivery available
£60.00

1x Wimberley P50 Quick Release Plate

This item is already in your basket

Wimberley P50 Quick Release Plate

Wimberley P10 Quick Release Plate
4.0

Find out more about the Wimberley P10 Quick Release Plate

Wimberley P10 Quick Release Plate. One a line of Arca-Swiss style quick-release plates for collared lenses. These plates have important innovative features that distinguish them from other plates on the market. Lens feet with larger 3/8" mounting holes require insertion of a 3/8" to 1/4" reducer bushing to fasten plates using these holes.

In StockFree delivery available
£58.00

1x Wimberley P10 Quick Release Plate

This item is already in your basket

Wimberley P10 Quick Release Plate

Wimberley Plamp Stake Extension

Find out more about the Wimberley Plamp Stake Extension

The Wimberley Plamp Stake Extension is an add-on accessory for the Plamp Stake (not included, available separately). The Stake Extension is made of solid plastic and adds more than 10-inches to the height of the Stake. Multiple extensions (4 max.) may be connected in series to achieve the desired height.

In Stock
£12.00

1x Wimberley Plamp Stake Extension

This item is already in your basket

Wimberley Plamp Stake Extension

Wimberley P40 Quick Release Plate
4.5

Find out more about the Wimberley P40 Quick Release Plate

Wimberley P40 Quick Release Plate. One a line of Arca-Swiss style quick-release plates for collared lenses. These plates have important innovative features that distinguish them from other plates on the market. Lens feet with larger 3/8" mounting holes require insertion of a 3/8" to 1/4" reducer bushing to fasten plates using these holes.

Awaiting StockFree delivery available
£60.00

1x Wimberley P40 Quick Release Plate

This item is already in your basket

Wimberley P40 Quick Release Plate

Wimberley The Plamp II
4.5

Find out more about the Wimberley The Plamp II

Finally there is a way to stabilise those aggravating windblown subjects! The Plamp II is an easily positionable arm which can be used to hold macro subjects and other useful objects. One end of the Plamp clamps to your tripod while the other grasps the object. One day in the field with a Plamp (or two) and you will begin to realise its full potential.

Awaiting StockFree delivery available
£52.00

1x Wimberley The Plamp II

This item is already in your basket

Wimberley The Plamp II

Wimberley PP-222 Plamp Extension

Find out more about the Wimberley PP-222 Plamp Extension

The Wimberley PP-222 Plamp Extension is an easily positionable arm used to hold macro subjects and other useful objects. This extension arm adds 12 additional inches (30cm) to the length of the Plamp II, making it even more versatile and useful.

Awaiting Stock
£11.00

1x Wimberley PP-222 Plamp Extension

This item is already in your basket

Wimberley PP-222 Plamp Extension

Wimberley MonoGimbal Head
5.0

Find out more about the Wimberley MonoGimbal Head

The Wimberley MonoGimbal Head is an Arca-type compatible accessory that allows for a variety of movements when using longer lenses on a monopod. It has been designed for mounting lenses and cameras sideways and therefore reducing the chance of the camera falling forwards as the total mass it more evenly balanced.

Awaiting StockFree delivery available
£199.00

1x Wimberley MonoGimbal Head

This item is already in your basket

Wimberley MonoGimbal Head

Wimberley AP-554 replacement lens foot
4.0

Find out more about the Wimberley AP-554 replacement lens foot

The Wimberley AP-554 replacement lens foot replaces the stock foot on the rotation collar of the Nikon 500mm f/4 AF-S (I, II & VR) and 200-400mm f/4 AF-S (VR) lenses. The AP-544 is taller than the Wimberley AP-533 and provides greater clearance between the body of the lens and the foot, making it easier to use the foot as a handle for your lens. Its longer

In StockFree delivery available
£119.00

1x Wimberley AP-554 replacement lens foot

This item is already in your basket

Wimberley AP-554 replacement lens foot

Wimberley 1/4inch Screw

Find out more about the Wimberley 1/4inch Screw

An additional 1/4" screw for use with Wimberley P series quick release plates

In Stock
£4.75

1x Wimberley 1/4inch Screw

This item is already in your basket

Wimberley 1/4inch Screw

Wimberley AK100 Sidekick Adapter

Find out more about the Wimberley AK100 Sidekick Adapter

The Wimberley AK100 Sidekick Adapter attaches to the Wimberley Sidekick, providing a dovetail width that conforms to the limited clamping range of lever-style clamps. (Traditional twist-knob clamps will work with the AK-100 as well.) The AK-100 also provides a stop-screw to insure that the Sidekick cannot accidentally slide out of your ball head's quick-release

In Stock
£49.00

1x Wimberley AK100 Sidekick Adapter

This item is already in your basket

Wimberley AK100 Sidekick Adapter

Wimberley AP-500 Replacement Lens Foot

Find out more about the Wimberley AP-500 Replacement Lens Foot

The Wimberley AP-500 is a custom low-profile replacement feet that replace the factory foot on the rotation collar of your lens. These feet also serve as the Arca-Swiss style quick-release plate eliminating the bulk and complexity of an additional plate. A Wimberley lens foot also improves lens handling on a conventional tripod head, such as a ball head,

Awaiting StockFree delivery available
£69.00

1x Wimberley AP-500 Replacement Lens Foot

This item is already in your basket

Wimberley AP-500 Replacement Lens Foot

Wimberley Soft Touch Knob Conversion Kit
5.0

Find out more about the Wimberley Soft Touch Knob Conversion Kit

The Wimberley Soft Touch Knob Conversion Kit allows you to replace the round tilt knob on older Sidekicks and Wimberley Heads with a 5-lobe, soft-touch knob.

In Stock
£13.00

1x Wimberley Soft Touch Knob Conversion Kit

This item is already in your basket

Wimberley Soft Touch Knob Conversion Kit

Wimberley AP-452 Lens Replacement Foot
5.0

Find out more about the Wimberley AP-452 Lens Replacement Foot

These custom low-profile replacement feet lower the centre of gravity of large lenses and make them easier to pack. The replacement feet have the same dual safety stops and flash bracket compatibility as the Wimberley lens plates. They are milled to slide right into an Arca-Swiss style quick-release clamp, and also have 1/4" and 3/8" tapped holes for mounting

Awaiting StockFree delivery available
£119.00

1x Wimberley AP-452 Lens Replacement Foot

This item is already in your basket

Wimberley AP-452 Lens Replacement Foot

Wimberley M-8 Perpendicular Plate Flash Bracket Module

Find out more about the Wimberley M-8 Perpendicular Plate Flash Bracket Module

The Wimberley flash bracket system is beautifully engineered and highly modular; fitting together securely and providing you with an enormously versatile way of attaching flashes and accessories to your camera. Don't compromise: Build and modify your flash bracket system with pieces which precisely conform to your desired specification. The flash is connected

Special OrderFree delivery available
£104.00

1x Wimberley M-8 Perpendicular Plate Flash Bracket Module

This item is already in your basket

Wimberley M-8 Perpendicular Plate Flash Bracket Module

Wimberley RB100 Riser

Find out more about the Wimberley RB100 Riser

The Wimberley RB100 Riser block can be mounted on any 3/8"-16 stud mount on a tripod, monopod or ground pod to give you an additional 1" of height under any tripod head with a 3/8"-16 mounting hole. It allows you to use the Wimberley Head MK II on the original Skimmer Ground Pod, and it can also be used to give you additional height with the Skimmer II

In Stock
£37.00

1x Wimberley RB100 Riser

This item is already in your basket

Wimberley RB100 Riser

Wimberley P652

Find out more about the Wimberley P652

These custom low-profile replacement feet replace the factory foot on the rotation collar of your lens and also serve as the Arca-Swiss style quick-release plate for your lens. No additional quick-release plate is needed. It makes your lens handle better on a conventional tripod head, such as a ball head, and also makes it easier to pack. For 600mm f4

In StockFree delivery available
£107.00

1x Wimberley P652

This item is already in your basket

Wimberley P652

Wimberley M-1 Quick-Release Arm Flash Bracket Module
5.0

Find out more about the Wimberley M-1 Quick-Release Arm Flash Bracket Module

The Wimberley flash bracket system is beautifully engineered and highly modular; fitting together securely and providing you with an enormously versatile way of attaching flashes and accessories to your camera. Don't compromise: Build and modify your flash bracket system with pieces which precisely conform to your desired specification. The flash is connected

Special OrderFree delivery available
£79.00

1x Wimberley M-1 Quick-Release Arm Flash Bracket Module

This item is already in your basket

Wimberley M-1 Quick-Release Arm Flash Bracket Module

Wimberley M-4 Macro Arm Flash Bracket Module

Find out more about the Wimberley M-4 Macro Arm Flash Bracket Module

The Wimberley flash bracket system is beautifully engineered and highly modular; fitting together securely and providing you with an enormously versatile way of attaching flashes and accessories to your camera. Don't compromise: Build and modify your flash bracket system with pieces which precisely conform to your desired specification. The flash is connected

Special OrderFree delivery available
£124.00

1x Wimberley M-4 Macro Arm Flash Bracket Module

This item is already in your basket

Wimberley M-4 Macro Arm Flash Bracket Module

Wimberley AP-602 Lens Plate

Find out more about the Wimberley AP-602 Lens Plate

Designed for the Canon 600mm f4 IS and 400mm f2.8 IS the Wimberley AP-602 replacement plate lowers the overall height and centre of gravity of the lens making them easier to handle and pack. They are manufactured to fit into an Arca-Swiss style quick-release clamp, and also have 1/4" and 3/8" tapped holes for mounting to non-quick-release tripod heads and

In StockSave £12Free delivery available
£97.00Was £109.00

1x Wimberley AP-602 Lens Plate

This item is already in your basket

Wimberley AP-602 Lens Plate

Wimberley M-3 Tilt Arm Flash Bracket Module

Find out more about the Wimberley M-3 Tilt Arm Flash Bracket Module

The Wimberley flash bracket system is beautifully engineered and highly modular; fitting together securely and providing you with an enormously versatile way of attaching flashes and accessories to your camera. Don't compromise: Build and modify your flash bracket system with pieces which precisely conform to your desired specification. The flash is connected

Special OrderFree delivery available
£105.00

1x Wimberley M-3 Tilt Arm Flash Bracket Module

This item is already in your basket

Wimberley M-3 Tilt Arm Flash Bracket Module

Wimberley M-6 Extension Post Flash Bracket Module

Find out more about the Wimberley M-6 Extension Post Flash Bracket Module

The Wimberley flash bracket system is beautifully engineered and highly modular; fitting together securely and providing you with an enormously versatile way of attaching flashes and accessories to your camera. Don't compromise: Build and modify your flash bracket system with pieces which precisely conform to your desired specification. The flash is connected

Special OrderFree delivery available
£54.00

1x Wimberley M-6 Extension Post Flash Bracket Module

This item is already in your basket

Wimberley M-6 Extension Post Flash Bracket Module

Wimberley M-9 Wimberley Head Flash Bracket Module

Find out more about the Wimberley M-9 Wimberley Head Flash Bracket Module

The Wimberley flash bracket system is beautifully engineered and highly modular; fitting together securely and providing you with an enormously versatile way of attaching flashes and accessories to your camera. Don't compromise: Build and modify your flash bracket system with pieces which precisely conform to your desired specification. The flash is connected

Special OrderFree delivery available
£135.00

1x Wimberley M-9 Wimberley Head Flash Bracket Module

This item is already in your basket

Wimberley M-9 Wimberley Head Flash Bracket Module

Wimberley M-7 Flash Flipper Flash Bracket Module

Find out more about the Wimberley M-7 Flash Flipper Flash Bracket Module

The Wimberley flash bracket system is beautifully engineered and highly modular; fitting together securely and providing you with an enormously versatile way of attaching flashes and accessories to your camera. Don't compromise: Build and modify your flash bracket system with pieces which precisely conform to your desired specification. The flash is connected

In StockSave £17Free delivery available
£62.00Was £79.00

1x Wimberley M-7 Flash Flipper Flash Bracket Module

This item is already in your basket

Wimberley M-7 Flash Flipper Flash Bracket Module

Wimberley AP-555 Replacement Lens Foot

Find out more about the Wimberley AP-555 Replacement Lens Foot

The AP-555 has been designed for use with Nikon’s 400mm f/2.8 FL VR, 600mm f/4.0 FL VR and 800mm f/5.6 FL VR lenses. It will replace the stock foot on the rotation collar and because of the longer length; it will be better balanced with smaller DSLR camera bodies than the stock Nikon foot. Additionally, Wimberley lens plates are compatible with most Arca-Swiss

Special OrderFree delivery available
£143.00

1x Wimberley AP-555 Replacement Lens Foot

This item is already in your basket

Wimberley AP-555 Replacement Lens Foot

Wimberley AP-610 Replacement Lens Foot

Find out more about the Wimberley AP-610 Replacement Lens Foot

The Wimberley AP-610 is a replacement lens foot for the Sony 100-400 f/4.5-5.6 GM OSS FE Lens.

Special OrderFree delivery available
£69.00

1x Wimberley AP-610 Replacement Lens Foot

This item is already in your basket

Wimberley AP-610 Replacement Lens Foot

Wimberley M-2 Upright Flash Bracket Module

Find out more about the Wimberley M-2 Upright Flash Bracket Module

The Wimberley flash bracket system is beautifully engineered and highly modular; fitting together securely and providing you with an enormously versatile way of attaching flashes and accessories to your camera. Don't compromise: Build and modify your flash bracket system with pieces which precisely conform to your desired specification. The flash is connected

Special OrderFree delivery available
£55.00

1x Wimberley M-2 Upright Flash Bracket Module

This item is already in your basket

Wimberley M-2 Upright Flash Bracket Module

Wimberley Full Gimbal Conversion Kit

Find out more about the Wimberley Full Gimbal Conversion Kit

The Wimberley Full Gimbal Conversion Kit allows you to replace the Wimberley quick-release clamp on the Sidemount Wimberley Head (WH-200-S) with the swinging arm and platform of the full gimbal Wimberley Head (WH-200). The procedure is simple, and the only tool required is a 5/32 hex key which is included.

Special OrderSave £74Free delivery available
£275.00RRP £349.00

1x Wimberley Full Gimbal Conversion Kit

This item is already in your basket

Wimberley Full Gimbal Conversion Kit