Benro A573T Dual-Tube Aluminum Video Tripod

The Benro A573T Dual-Tube Aluminum Video Kit is built up of the brilliant S6PRO Video Head and A573T Video Tripod. The S6PRO is capable of supporting loads up to 6 kg. It is equipped with a 65mm flat base with a 3/8" thread, utilising a 5+0 steps of adjustable counterbalance via a knob on one side. The opposite knob gives control over continuous pan and tilt drag. It has a versatile tilt range of +90/-75° and a full 360° pan range. The A573T is a 75 mm bowl 2 stage/3 section tandem style video tripod. Providing an efficient workflow has been prioritised by Benro (setup/breakdown times reduced). With a mid-level spreader, rubber and dual spiked feet, and a height range (with S6PRO attached) between 75 cm and 157.5 cm - this tripod system is hard-wearing, secure, and strong; tailor-made for professional Videographers.

Benro A573T Dual-Tube Aluminum Video Tripod Key Features:

• Combination of S6PRO Video Head and A573T Dual-Tube Video Tripod
• S6PRO Video Head with 5+0 steps of counterbalance
• Continuous pan and tilt drag
• Independent pan and tilt locks
• +90/-75° tilt range
• 360° pan range
• Illuminated bubble level
• 1/4"-20 and 3/8"-16 screws provided - stored underneath camera plate
• 1/4"-20 threaded hole on each side of S6PRO for additional attachments - articulating arms etc.
• Benro A573T 75mm Bowl 2 stage/3 section Dual-Tube Aluminum Video Tripod
• Includes a half-ball adapter with a 3/8"-16 screw
• Max height of 157.5 cm and minimum 75 cm
• Rubber and spiked feet included
• Built-in mid-level spreader

Expanded Benro A573T Dual-Tube Aluminum Video Tripod Key Features:

S6PRO Video Head

The Benro S6PRO Video Head is both robust and lightweight, supporting loads up to 6 kg video cameras with accessories. It is equipped with a 65mm flat base with a 3/8" threaded stud, allowing efficient movement between compatible tripods and sliders, jibs, monopods, and various other support gear. For heavy loads, the S6PRO utilises 5+0 steps of adjustable counterbalance via a knob on one side of the head. The opposite knob gives control over continuous pan and tilt drag. This video head has a versatile tilt range of +90/-75° and a full 360° pan range; attach additional accessories via two 3/8"-16 threaded holes (can secure articulating arms). The rugged magnesium/aluminium construction of the S6PRO Head incorporates two rosette adapters (L and R) to attach the adjustable pan bar. For optimal camera balance, the camera plate can be adjusted forward/back, and a safety lock ensures the plate cannot slip out of place - 1/4"-20 and 3/8"-16 threaded studs provided and stored underneath camera plate.

What's in the box?

• 1 x A573T Dual-Tube Aluminum Video Tripod
• 1 x Rubber and spiked feet
• 1 x Benro S6PRO Video Head
• 1 x Sliding Plate for S6PRO
• 1 x Pan Bar
• 1 x Case

Benro S Pro Tandem Leg Video Tripod Kit Product Video:

Benro A573T Dual-Tube Aluminum Video Tripod

FAQs

Where are Benro tripods made?

Benro tripods and tripod heads (Benro Precision Photography Industry Co. LTD) are made from a facility in Hong Kong.

Do Benro tripods have a spirit-level?

They do not have a spirit-level, however, they do have a built-in bubble level to aid with aligning your camera and tripod to gain the best content possible.