Boom Arms and Supports
A complete wall mounting kit, the Interfit INT312 is simple to install and it allows you to use full width paper backdrops in the studio (although it is not for use with heavy vinyl rolls). The Interfit Wall mounting kit comprises of a pair of wall brackets, three pairs of paper holders, three sets of plastic colour-coded chains and weights plus four wall
The Manfrotto 244N Magic Arm is a versitile aluminium support arm with a central locking knob. This differs from the 143N arm in that the 143B uses a cam lever. Each end features a Type 17 attachment and the arm can secure loads of up to 3kg.
The Lastolite Skylite Griphead is designed to allow the Skylite to be attached to lighting stands and tilted as required.
The Manfrotto 085BS Boom features a 35mm diameter 3 section boom arm complete with Pivoting Clamp 123, Counter Weight 022, Cine Stand with casters, cable clips and locking key. The maximum load at the full extension of 2.8m is 6kg and the light boom weighs 16.4kg.
The Manfrotto 143 Magic Arm is a versatile, aluminium articulating arm which can support up to 3kg and is designed to securely hold various accessories and enable quick positioning of whatever you attach to it (IE. lighting equipment or an additional camera). The arm comes with a central locking lever that can lock all three pivot points. On one end is
This Interfit INT274 adjustable reflector bracket will hold your reflector firmly in place and the swivel joint allows you to precisely position the reflector exactly where you want it. The bracket attaches to any lighting stand (although larger models with a wider leg spread will provide a more stable platform) and will support reflectors up to 150cm in
The Manfrotto 386B Nano Clamp is a smaller version of the popular Super Clamp. The 386B Nano clamp features a high friction tape which improves the grip, a high performance aluminium pull and lock aluminium handle, a unique surface design that was tested on the smallest surface enabling it to grip round or flat tube/pole surfaces. The flexibility given
The Elinchrom RQ Boom Arm is designed primarily for use with the Ranger Quadra heads (other small lightweight heads can also be used). The arm extends from 63cm up to a maximum of 156cm and the rubberised grip means the light can be easily and safely positioned as required particularly when used above the subject. The two sections of the EL-Boom Arm can
Designed to be fixed to a solid wall, this Interfit INT309 bracket can be used to support both studio lighting and accessories such as reflectors. The arm may be extended from 74cm to 124cm and bear a maximum load of 5kg at full extension. The arm should only be mounted to a solid wall.
The Mini Friction Arm is a useful, multi-role arm; handy for positioning and securing accessories, cameras, smaller lights and miscellaneous ancillaries. Fully extended length is 24cm and maximum payload is 3kg. Two 1/4 inch and a 3/8nch end adapters are supplied and fitted as standard, and other adapter options are available.
The Manfrotto 038 Double Super Clamp consists of two Super Clamps connected at a 90 degree angle to each other. They are ideal for connecting horizontal bars or supports to vertical stands and can be used to clamp onto any tube with a diameter of 12mm to 54mm.
Manfrotto's aluminium Autopole simply clamps between the studio floor and ceiling. This shorter model extends between 1.5 and 2.7m in height. Pole diameters are 45mm and 40mm.