Lighting Stands and Supports
This three-section boom arm is strong enough to support most Monolights. Fully assembled it extends to 200cm, while at its shortest, is only 75cm. Features a pivoting clamp and 4Kg counterweight. The total weight is 7.5kg. Constructed from black, non-reflecting aluminium and includes a 5/8 Inch stud.
The Lastolite 4-section heavy duty air-cushioned light stand extends from 104cm to 352cm in height and includes metal locking collars for durability.
An ideal choice for smaller portable lighting kits due to its compact and lightweight design, the Manfrotto 5001B Nano stand weighs in at just 930g and the 5 section design folds down to 48cm. Fitted with a 5/8 inch lighting spigot and a 1/4 inch adaptor thread it can be used to support equipment up to 1.5kg in weight.
The NG-L280 Light Stand by Nanguang is a 3-section, spring-cushioned lighting stand that can support lighting heads of up to 15kg. With a 100cm footprint diameter and a steel and aluminium construction, it is incredibly stable. The maximum working height is 265cm whilst the minimum is 120cm.
The Lastolite Lumen8 Pneumatic Stand is an air-cushioned lighting stand designed to support Lumen8 (and other makes) Flash Heads. It extends from 85cm to 312cm in height and has metal locking collars for added durability.
Lastolite 4-Section Lightweight Lighting Stand has plastic locking collars and extends from 85cm to 312cm in height.
Built with flexibility and location shoots in mind, the Nanopole is a lightweight and compact stand for flash heads and ancillaries weighing up to 1.5kg. The Nanopole possesses a couple of features which make it stand out from the crowd: Firstly, a ballast hook to secure sandbags for additional stability in high winds or when working on uneven surfaces.
The Manfrotto 1004BAC Master Stand has a maximum height of 385cm and a maximum load capacity of 9kg. It is made from aluminium, comes in black and weighs 2.15kg. With a patented Quick Stack System the stands can be connected and stacked together, which saves a lot of room while storing them in the studio.
Aluminium boom stand with black finish. Supplied with an (empty) sandbag counterweight for maximum stability and smoothness. The boom is adjustable from between 112 and 191cm and will supoport loads of up to 2kg at the maximum extension.
Medium duty "Clip Lock" stand with standard lighting Spigot. Three sections extend to a height of 2.3 metres ( 7' 6" ). Ideal for use with all major brands of studio light including Bowens, Elinchrom, Interfit et cetera (Not suitable for Portaflash). Recommended to support lights with medium softboxes up to 80cm x 120cm or 120cm Octagonal. 60cm legs create
Manfrotto's aluminium Autopole simply clamps between the studio floor and ceiling and extends between 2.1 and 3.7m in height. Pole diameters are 45mm and 40mm.
A complete wall mounting kit, the Interfit INT312 is simple to install and it allows you to use full width paper backdrops in the studio (although it is not for use with heavy vinyl rolls). The Interfit Wall mounting kit comprises of a pair of wall brackets, three pairs of paper holders, three sets of plastic colour-coded chains and weights plus four wall