Eyepiece Accessories and Filters
The Sky-Watcher 1.25 Inch Light Pollution Filter is a contrast-enhancing anodised aluminium, optical glass filter designed to block out the wavelengths of light emitted by mercury-vapour light and other common causes of light pollution, whilst providing higher transmission at critical hydrogen-alpha and hydrogen-beta lines than competing filters. Bright,
Celestron's Moon Filter is an economical eyepiece filter for reducing the brightness of the moon and improving contrast, so greater detail can be observed on the lunar surface. The clear aperture is 21mm and the transmission is about 18%. Screws on to the filter thread of any Celestron, or other manufacturer's 1.25 inch eyepiece.
The SkyTech CLS Canon EOS Clip Filter aids astrophotography on Canon APS-C EOS cameras by blocking light pollution while allowing light from deepsky objects through. The CLS filter has a wide pass-band, giving a natural colour rendition, meaning it is ideal for areas with moderate light pollution such as in city outskirts or suburban locations.
Cheshire Collimating Eyepiece.Designed to assist with the accurate collimation of a Newtonian reflector telescope.
This 1mW red laser collimating device boasts some of the best and most practical functions collimators can offer. A large display window allows the user to clearly see the face of the device. Whilst most other brand name collimators only have one setting, this has seven adjustable brightness levels. The 1.25" laser collimator comes complete with a removable
Enhance your viewing of the planets and the moon. Even a 3/4 moon can reflect enough light to strain the eyes, so the use of a moon filter helps to reduce the incoming light and will even improve the contrast. The coloured filters are matched to help improve the viewing of a number of the Planets, and even comets.
The SkyTech CLS-CCD Canon EOS Clip Filter aids astrophotography on Canon APS-C EOS cameras by blocking light pollution while allowing light from deepsky objects through. The CLS-CCD filter has a wide pass-band, giving a natural colour rendition, meaning it is ideal for areas with moderate light pollution such as in suburban locations.
Experience unrivalled views of our nearest star with one of these fantastic solar filters. These fully-mounted filters are far safer and easier to use than 'solar film' as they are mounted in a frame which is securely attached over the end of your telescope or camera lens via thumb-screws. This not only means that the filter can be quickly and easily attached
The Optical Vision 1.25 Inch Variable Polarising Filter is a high quality anodised aluminium, optical glass variable polarising filter designed to reduce the amount of light entering your eyepiece. You can progressively dim the view when observing a bright object, such as the Moon or certain planets, to a level according to your needs, whilst increasing
The Baader Hyperion 14mm Finetuning-Ring will allow you to easily change the focal length of your Hyperion eyepiece. The finetuning-ring has an outside diameter of 2” and is equipped with a male M48 thread on one end and a female M48 thread on the other. The ring simply attaches to the ring between the front negative element and the main body of the Hyperion
90 degree Erecting Prism designed to fit 1.25”/31.7mm focusers and eyepieces.Designed to give a more comfortable viewing position, and to correct upside down images.