13 Matching Products
Designed primarily for use with the Quantum T3 battery utilising the locking connection (although it can also be used with other Quantum batteries) the CZ2 coiled cable connects to Canon flashguns 430EZ, 480G, 540EZ, 550EX, 580EX and 580EX II.
Designed primarily for use with the Quantum T3 battery utilising the locking connection (although it can also be used with other Quantum batteries), the CKE2 coiled cable connects to Nikon flashguns SB28, SB80, SB800 and SB900.
Leave your AC studio flash at home: The Qpaq-X flash system works for both location and candid photography. Connect one or two Qflash X 400 watt-second heads and shoot in Manual, Automatic, TTL, or Strobo mode. Qpaq-X has a removable battery that is user replaceable. Select from either small or large battery modules to fit the needs of your assignment,
Quantum QF51 Male / Female Extension Cable. 6m (19.5 foot) length. To extend QF21, QF50, QF52, QF53, or TTL adapters. Maximum control length possible is 30m (100 feet), using 5 QF51 cables.
The Quantum CQ8 Power Cable is a dedicated short coiled power cord for use with the Quantum Turbo battery to power Trio and Pilot shoe-mounted Qflashes for Nikon, Fuji and Canon digital cameras.
This Turbo Compact cable is for use with the Metz 45CL1, CL3, CL4, CT3 and CT4 (not CT1 or CT5) flash units.
The Quantum CQ2 Power Cable is a dedicated coiled power cord for use with the Quantum Turbo battery to power Trio and Pilot shoe-mounted Qflashes for Nikon, Fuji and Canon digital cameras.
Quantum's Energy Saver improves the efficiency of alkaline AA batteries for some flashes that require AAs when using the Turbo Batteries. The Energy Saver is the size and shape of an AA battery. It substitutes for one of the alkaline batteries in the flash battery compartment: If a flash normally required 4 AAs when used with the Turbo, insert just 3 AAs
The Quantum OM41 V-Mount Power Cable allows you to power the OM4 Video Ringlight from a V-Mount Battery.
The Quantum ES1 Energy Saver is the size of a AA battery, and instead of using 4 AA alkaline cells in the battery compartment of certain specific flashes, you would insert 3 AAs and the Energy Saver. The ES1 is compatible with the Vivitar 285HV, Metz 45CL-1/3/4, 45CT-3/4, and Hasselblad 4504.
Spare or replacement High Performance Battery for the QPAQ-X Command Module.
Y connector module needed for third Qflash connected, and each one thereafter. Required for a TTL adapter or remote sensor when used with two or more Qflashes.