Shoulder Rigs, Camera Cages and Baseplates

282 Matching Products Displaying Page 1 of 3

Blackmagic URSA Mini Shoulder Mount Kit

Find out more about the Blackmagic URSA Mini Shoulder Mount Kit

The Blackmagic URSA Mini Shoulder Mount Kit consists of a shoulder pad with built in rosettes, rail mounts and integrated quick lock release attachment points along with a top handle, all designed to perfectly fit the URSA Mini body so the camera can be used comfortably on the shoulder.

In StockFree delivery available
£329.00

1x Blackmagic URSA Mini Shoulder Mount Kit

This item is already in your basket

Blackmagic URSA Mini Shoulder Mount Kit

Hague CSM Camera Shoulder Mount Camera Rig

Find out more about the Hague CSM Camera Shoulder Mount Camera Rig

The Hague CSM Camera Shoulder Mount Rig is made of aluminium which can be bent to ensure a snug fit on your shoulder. Its design allows plenty of room for the right hand to be used on the cameras controls or to focus. A handgrip below the camera allows the left or right hand to support and take the weight of the camera.

In Stock
£49.80

1x Hague CSM Camera Shoulder Mount Camera Rig

This item is already in your basket

Hague CSM Camera Shoulder Mount Camera Rig

SmallRig GH5 Cage with Top Handle

Find out more about the SmallRig GH5 Cage with Top Handle

The SmallRig Cage (2050) is a formfitting cage with Top Handle specially designed to house the Panasonic Lumix GH5 compact system camera. The cage provides additional stability and protection, as well as plenty of ¼" and 3/8" threaded holes for creating the perfect rig setup. All camera controls and compartments are accessible.

In StockFree delivery available
£112.00

1x SmallRig GH5 Cage with Top Handle

This item is already in your basket

SmallRig GH5 Cage with Top Handle

SmallRig Cage for BlackMagic Design Pocket Cinema Camera 4K/6K - 2203

Find out more about the SmallRig Cage for BlackMagic Design Pocket Cinema Camera 4K/6K - 2203

The SmallRig Cage for BlackMagic Design Pocket Cinema Camera 4K/6K is a form-fitting cage that is secured with a 1/4"-20 screws on the top and bottom. Additional locating pins and rubber pads are also in place to guard against wiggles and scratches. There are also built-in NATO rails located on the top and left side of the cage. These can be used to attach

In StockFree delivery available
£76.99

1x SmallRig Cage for BlackMagic Design Pocket Cinema Camera 4K/6K - 2203

This item is already in your basket

SmallRig Cage for BlackMagic Design Pocket Cinema Camera 4K/6K - 2203

SmallRig Cage for Sony A7RIII/ A7III 2087

Find out more about the SmallRig Cage for Sony A7RIII/ A7III 2087

The SmallRig Cage 2087 is exclusively designed for the Sony A7RIII/A7III mirrorless cameras. It could offer lots of additional attachment options and enables the camera to release its potential to the utmost as per the needs of cameraman during shooting.

In StockFree delivery available
£74.00

1x SmallRig Cage for Sony A7RIII/ A7III 2087

This item is already in your basket

SmallRig Cage for Sony A7RIII/ A7III 2087

Shape Canon C200 Relocator Extension Cable

Find out more about the Shape Canon C200 Relocator Extension Cable

A sturdy and reliable Shape Canon C200 Relocator Extension Cable perfect for use with the Shape Remote Extension Handle for the Canon C200 camera.

Awaiting StockSave £10Free delivery available
£75.00RRP £85.00

1x Shape Canon C200 Relocator Extension Cable

This item is already in your basket

Shape Canon C200 Relocator Extension Cable

SmallRig Long Lens Support 1087

Find out more about the SmallRig Long Lens Support 1087

This lens support system is perfect for long lenses and is compatible with any industry-standard 15 mm rod system. It helps to create a more stable, vibration-free platform for shooting. The Y-shaped lens support screws onto the 15 mm rod clamp of a lens while shooting. There are 2 rubber washers to prevent the finish on your lens from wearing.

Special Order
£16.00

1x SmallRig Long Lens Support 1087

This item is already in your basket

SmallRig Long Lens Support 1087

SmallRig Easy Plate 1598

Find out more about the SmallRig Easy Plate 1598

This easy plate provides 1/4''-20 and 3/8"-16 threaded holes in standard spacing (9 mm centre to centre). It can be mounted on SmallRig railblocks, dovetails, and short rods. It works as a switching plate when attached to the bottom of a DSLR cage.

In Stock
£8.25

1x SmallRig Easy Plate 1598

This item is already in your basket

SmallRig Easy Plate 1598

Zhiyun Dual Handheld Grip for Crane Plus

Find out more about the Zhiyun Dual Handheld Grip for Crane Plus

This Dual Handgrip from Zhiyun-Tech is designed to reduce fatigue when operating the Crane or Crane-M gimbal. It produces smooth, professional-looking footage when filming with camcorders, gimbal-mounted DSLR, mirrorless cameras, or smartphones.

In StockFree delivery available
£99.00

1x Zhiyun Dual Handheld Grip for Crane Plus

This item is already in your basket

Zhiyun Dual Handheld Grip for Crane Plus

Buy used from £65.00
Zhiyun Dual Handle EH002 for Crane 2

Find out more about the Zhiyun Dual Handle EH002 for Crane 2

This Dual Handle for the Crane-2 Stabiliser from Zhiyun-Tech allows you to perform various gestures with the gimbal, such as top-down and bottom-up. The optional gimbal installs in the centre, enabling 2-handed operation and resulting in smooth video work.

Awaiting StockFree delivery available
£96.00

1x Zhiyun Dual Handle EH002 for Crane 2

This item is already in your basket

Zhiyun Dual Handle EH002 for Crane 2

Movcam Cage for Blackmagic Pocket Cinema Camera

Find out more about the Movcam Cage for Blackmagic Pocket Cinema Camera

The Movcam Cage with removable handgrip protects your Blackmagic Pocket Cinema Camera, while providing various mounting options and allowing full access to your camera’s connection ports, LCD screen, and battery compartment. Machined into the cage are two slots for optional accessory straps and on the bottom is Movecam's Lightweight Support System, which

In StockFree delivery available
£93.00

1x Movcam Cage for Blackmagic Pocket Cinema Camera

This item is already in your basket

Movcam Cage for Blackmagic Pocket Cinema Camera

SmallRig DJI Ronin-M Quick Plate Mount 1682

Find out more about the SmallRig DJI Ronin-M Quick Plate Mount 1682

The SmallRig Mini Quick Plate Mount for DJI Ronin/Ronin-M/Ronin-MX gimbals is designed to simply and quickly slide onto your equipment. With this plate mount, you are able to quickly switch your camera from the Ronin, Ronin-M, or Ronin-MX to a tripod.

Special Order
£29.00

1x SmallRig DJI Ronin-M Quick Plate Mount 1682

This item is already in your basket

SmallRig DJI Ronin-M Quick Plate Mount 1682

SmallRig Panasonic Lumix GH5 Cage

Find out more about the SmallRig Panasonic Lumix GH5 Cage

The SmallRig Cage (2049) is a formfitting cage specially designed to house the Panasonic Lumix GH5 compact system camera. The cage provides additional stability and protection, as well as plenty of ¼" and 3/8" threaded holes for creating the perfect rig setup. All camera controls and compartments are accessible.

Awaiting StockFree delivery available
£80.00

1x SmallRig Panasonic Lumix GH5 Cage

This item is already in your basket

SmallRig Panasonic Lumix GH5 Cage

Shape Revolt VCT Baseplate With Follow Focus And Matte Box Pro Kit

Find out more about the Shape Revolt VCT Baseplate With Follow Focus And Matte Box Pro Kit

The Revolt VCT universal baseplate offers a unique design, created for amateur and professional filmmakers seeking high quality camera stabilizers and supports. This bundle includes a perfect combination of our universal baseplate with our patented push button technology telescopic handles, a 2-stage matte box, and a sophisticated follow focus pro syst

Special OrderFree delivery available
£2,619.00

1x Shape Revolt VCT Baseplate With Follow Focus And Matte Box Pro Kit

This item is already in your basket

Shape Revolt VCT Baseplate With Follow Focus And Matte Box Pro Kit

SmallRig DJI Ronin-M Dovetail Mount 1685

Find out more about the SmallRig DJI Ronin-M Dovetail Mount 1685

This dovetail mount is designed to switch your camera from a Ronin-M gimbal to any other camera support without removing the dovetail or detaching the camera. It is made from quality aluminium alloy and is locked by an angle wrench. It is provided with 1/4” and 3/8” threaded holes, 4 counterbores, and a safety pin.

Awaiting Stock
£49.00

1x SmallRig DJI Ronin-M Dovetail Mount 1685

This item is already in your basket

SmallRig DJI Ronin-M Dovetail Mount 1685

SmallRig Mount for Samsung T5 SSD - 2245

Find out more about the SmallRig Mount for Samsung T5 SSD - 2245

The SmallRig Mount for Samsung T5 SSD – 2245 is a dedicated mount that works with SmallRig Cage for BMPCC 4K & 6K 2203, CVB2254 and CVB2255, and SmallRig Cage for Z cam E2 2264. The user can fix it to the cage via two M4 screws. The available knob screws are designed to lock the T5 SSD and its USB-C cable in place. It is also worth noting that the mount

In Stock
£22.99

1x SmallRig Mount for Samsung T5 SSD - 2245

This item is already in your basket

SmallRig Mount for Samsung T5 SSD - 2245

Kamerar Video Shoulder Stabiliser Support System

Find out more about the Kamerar Video Shoulder Stabiliser Support System

The Socom Video Shoulder Rig Kit is a solid foundation for video shooters looking to start out in 15mm Rail systems. It can be configured as a basic lightweight camera stabilizer or configured to a more advanced shoulder rig for supporting LED lighting, microphones, LCD monitors, portable audio recorders, follow focus systems, and more.

In StockFree delivery available
£174.00

1x Kamerar Video Shoulder Stabiliser Support System

This item is already in your basket

Kamerar Video Shoulder Stabiliser Support System

SmallRig Sun Hood for Atomos Ninja V

Find out more about the SmallRig Sun Hood for Atomos Ninja V

The SmallRig Sun Hood for Atomos Ninja V HDMI Monitor/Recorder helps to provide a great viewing experience even in harsh lighting conditions. The Sun Hood fits onto the SmallRig Cage 2209 by 4 velcro tapes, which is easy to attach and remove.

In Stock
£16.00

1x SmallRig Sun Hood for Atomos Ninja V

This item is already in your basket

SmallRig Sun Hood for Atomos Ninja V

Sachtler Ace Base Plate

Find out more about the Sachtler Ace Base Plate

Sachtler’s Ace Base Plate is a high-end base plate for videographers, complete with holes for 15mm rods. The base plate is easily taken down to attach to both tripods and shoulder rigs, and can hold a maximum load of 7kg. This large maximum load offers great flexibility when attaching additional accessories, such as a matte box or follow focus system, to

In StockFree delivery available
£226.00

1x Sachtler Ace Base Plate

This item is already in your basket

Sachtler Ace Base Plate

Manfrotto and Wooden Camera - Camera Cage Medium

Find out more about the Manfrotto and Wooden Camera - Camera Cage Medium

Manfrotto and Wooden camera have teamed up to produce a range of high-end camera cages aimed at independent filmmakers who use DLSR or Mirrorless systems. The cage features a minimalist design, made from solid, lightweight metal with a wooden handle, while an adjustable top plate ensures a snug fit for most rigs. The cage also features a clamp for HDMI

In StockFree delivery available
£289.95

1x Manfrotto and Wooden Camera - Camera Cage Medium

This item is already in your basket

Manfrotto and Wooden Camera - Camera Cage Medium

Wooden Camera Canon C200 | C200B Unified Accessory Kit (Pro)

Find out more about the Wooden Camera Canon C200 | C200B Unified Accessory Kit (Pro)

The Wooden Camera Canon C200/C200B Unified Accessory Kit (Pro) is a camera support package designed for the Canon C200 and C200B cameras. This accessory kit includes: Top Plate (C200, C200B), Unified Baseplate (C200, C200B, C700), 2x 15mm Rod (15"), NATO Handle Kit (Cheese, 70mm), Safety Dovetail (12"), UVF Mount V2, Rod Clamp (15mm LW), and Battery Sl

Special OrderFree delivery available
£2,046.00

1x Wooden Camera Canon C200 | C200B Unified Accessory Kit (Pro)

This item is already in your basket

Wooden Camera Canon C200 | C200B Unified Accessory Kit (Pro)

SmallRig Integrated Top Plate for Sony PXW-FS7/FS7II 1974

Find out more about the SmallRig Integrated Top Plate for Sony PXW-FS7/FS7II 1974

This plate is mounted on top of Sony FS7/FS7II camcorders with 4 screws. Its ‘Swiss cheese’ appearance consists of numerous 1/4” and 3/8” threaded and ARRI locating holes for the attachment of production accessories.

Special OrderFree delivery available
£59.00

1x SmallRig Integrated Top Plate for Sony PXW-FS7/FS7II 1974

This item is already in your basket

SmallRig Integrated Top Plate for Sony PXW-FS7/FS7II 1974

Chrosziel System for Sony A7S/R II

Find out more about the Chrosziel System for Sony A7S/R II

The Chrosziel 700-A7II System with Camera Cage and Lightweight Support provides the perfect combination of protection and easy handling for the Sony A7II series cameras. The cage comes with a top handle, 3/8"+1/4" threads, and the lightweight support system (LWS) comes with 15mm rods.

In StockFree delivery available
£349.00

1x Chrosziel System for Sony A7S/R II

This item is already in your basket

Chrosziel System for Sony A7S/R II

SmallRig Camera Fixing Screw with 1/4,, Thread (5 pcs)

Find out more about the SmallRig Camera Fixing Screw with 1/4,, Thread (5 pcs)

The Camera Fixing Screw 1615 comes with 1/4"-20 thread. Please be sure the size fits your camera and quick release plate before shopping.

Awaiting Stock
£4.49

1x SmallRig Camera Fixing Screw with 1/4,, Thread (5 pcs)

This item is already in your basket

SmallRig Camera Fixing Screw with 1/4,, Thread (5 pcs)

Limelite Comodo Carbon Fibre-AL Rod 35cm

Find out more about the Limelite Comodo Carbon Fibre-AL Rod 35cm

The Limelite Comodo Carbon Fibre-AL Rod 35cm is for use with the Comodo Camera Support system.

In Stock
£19.00

1x Limelite Comodo Carbon Fibre-AL Rod 35cm

This item is already in your basket

Limelite Comodo Carbon Fibre-AL Rod 35cm

Wooden Camera Panasonic EVA-1 Accessory Kit (Pro)

Find out more about the Wooden Camera Panasonic EVA-1 Accessory Kit (Pro)

The Panasonic EVA-1 Accessory Kit (Pro) is a professional camera support package designed for the Panasonic EVA-1 camera and utilises Wooden Camera's new Unified Baseplate System. The EVA-1 accessory package includes: Top Plate (Panasonic EVA-1), Unified Baseplate (Panasonic EVA-1), 2x 15mm Rod (15"), NATO Handle Kit (Plus, 70mm), Safety Dovetail (12”),

Special OrderFree delivery available
£1,944.00

1x Wooden Camera Panasonic EVA-1 Accessory Kit (Pro)

This item is already in your basket

Wooden Camera Panasonic EVA-1 Accessory Kit (Pro)

Wooden Camera Canon C200 | C200B Unified Accessory Kit (Advanced)

Find out more about the Wooden Camera Canon C200 | C200B Unified Accessory Kit (Advanced)

The Wooden Camera Canon C200/C200B Unified Accessory Kit (Advanced) is a camera support package designed for the Canon C200 and C200B cameras. The C200/C200B accessory package includes: Top Plate (C200, C200B), Unified Baseplate (C200, C200B, C700), 2x 15mm Rod (12"), NATO Handle Kit (Cheese, 70mm) and Safety Dovetail (8").

Special OrderFree delivery available
£1,206.00

1x Wooden Camera Canon C200 | C200B Unified Accessory Kit (Advanced)

This item is already in your basket

Wooden Camera Canon C200 | C200B Unified Accessory Kit (Advanced)

SmallRig HDMI Cable Clamp 1822

Find out more about the SmallRig HDMI Cable Clamp 1822

The SmallRig HDMI Cable Clamp can provide strain relief for HDMI cables where frequent tugging could cause damage to the camera. With only 1 screw to mount to the cage and lock the cable, it can save space for other accessories.

In Stock
£25.00

1x SmallRig HDMI Cable Clamp 1822

This item is already in your basket

SmallRig HDMI Cable Clamp 1822

SmallRig Cold Shoe to 1/4,, Threaded Adapter

Find out more about the SmallRig Cold Shoe to 1/4,, Threaded Adapter

The SmallRig Cold Shoe to 1/4,, Threaded Adapter (60x25x35 mm) made out of Aluminium Alloy is compatible with Canon, Nikon, Olympus, Pentax, Panasonic, Fujifilm, and Kodak. It is small in size, light weight and durable. The cold shoe adapter can attach the camera tightly via a cold shoe whereas ¼” screw could be mounted on the monitor in adjustable directions

In Stock
£6.99

1x SmallRig Cold Shoe to 1/4,, Threaded Adapter

This item is already in your basket

SmallRig Cold Shoe to 1/4,, Threaded Adapter

SmallRig Double Ball Head with Cold Shoe Mount + 1/4,, Screw

Find out more about the SmallRig Double Ball Head with Cold Shoe Mount + 1/4,, Screw

The SmallRig 1135 Double End Ball Head with Cold Shoe Mount and a ¼” Thumb Screw is a Multi-Function Double Ball Head on both ends with shoe adapter and 1/4" screw. It can mount Monitors and LED Lights to DSLRs, 180º Articulation. It also has a 1/4"-20 screw on top. The SmallRig 1135 Double End Ball Head can be mounted directly to a DSLR or camcorder's

Awaiting Stock
£7.99

1x SmallRig Double Ball Head with Cold Shoe Mount + 1/4,, Screw

This item is already in your basket

SmallRig Double Ball Head with Cold Shoe Mount + 1/4,, Screw

Shape Blackmagic Pocket Cinema Camera 4K Cage
3.0

Find out more about the Shape Blackmagic Pocket Cinema Camera 4K Cage

The Camera Cage for Blackmagic Cinema Camera 4K from Shape provides a formfitting base for attaching accessories, handles, or grips to your BMCC 4K. Accessory mounting options include one cold shoe and multiple 1/4?-20, 3/8?-16, and ARRI anti-twist threads. Constructed from lightweight yet sturdy CNC-machined aluminium, the cage includes a left-side clamp

In StockFree delivery available
£169.00

1x Shape Blackmagic Pocket Cinema Camera 4K Cage

This item is already in your basket

Shape Blackmagic Pocket Cinema Camera 4K Cage

Buy used from £115.00
SmallRig Cage for Atomos Ninja V

Find out more about the SmallRig Cage for Atomos Ninja V

A form-fitting SmallRig Cage designed for the Atomos Ninja V HDMI Monitor/Recorder. The SmallRig Cage was co-designed with Atomos to provide an additional protective exo-skeleton for the monitor, with a wide range of industry standard mount points. The cage mounts to the monitor by a 1/4"-20 screw on the top and two M3 screws on the left side.

Awaiting StockFree delivery available
£119.00

1x SmallRig Cage for Atomos Ninja V

This item is already in your basket

SmallRig Cage for Atomos Ninja V

SmallRig Camera/Camcorder Action Stabilizing Universal Handle

Find out more about the SmallRig Camera/Camcorder Action Stabilizing Universal Handle

The Action Stabilising Universal Handle from SmallRig is a top handle designed to add stability and comfort when shooting handheld with your camera rig setup. Lightweight, compact and ergonomic, the top handle is great for shooters on the move and features 8 ¼"-20 holes, 7 3/8"-16 threaded holes, 3 shoe mounts, and Arri locating holes. It attaches via two

In Stock
£35.00

1x SmallRig Camera/Camcorder Action Stabilizing Universal Handle

This item is already in your basket

SmallRig Camera/Camcorder Action Stabilizing Universal Handle

Vocas Spider Belly Brace

Find out more about the Vocas Spider Belly Brace

Compatible with the modular Spider System, the Vocas Spider Belly Brace (item code: 0830-0020) rests on the lower part of your torso to provide additional support and comfort when filming. Compatible with standard rosette.

In StockFree delivery available
£69.00

1x Vocas Spider Belly Brace

This item is already in your basket

Vocas Spider Belly Brace

Shape Straight Shoulder Mount for Canon C100/300/500

Find out more about the Shape Straight Shoulder Mount for Canon C100/300/500

This straight shoulder rig is designed specifically for the Canon Cinema EOS range of Super 35mm camcorders. The kit includes the C100/300 baseplate, a 15mm rod system, Shapes adjustable Quick Handles and a comfortable shoulder pad and back pad.

In StockFree delivery available
£550.00

1x Shape Straight Shoulder Mount for Canon C100/300/500

This item is already in your basket

Shape Straight Shoulder Mount for Canon C100/300/500

Wooden Camera Panasonic EVA-1 Accessory Kit (Advanced)

Find out more about the Wooden Camera Panasonic EVA-1 Accessory Kit (Advanced)

The Wooden Camera Panasonic EVA-1 Accessory Kit (Advanced) is a professional camera support package designed for the Panasonic EVA-1 camera and utilises Wooden Camera's new Unified Baseplate System. This accessory kit includes: Top Plate (Panasonic EVA-1), Unified Baseplate (Panasonic EVA-1), 2x 15mm Rod (12"), Safety Dovetail (8”), NATO Handle Kit (Plus,

Special OrderFree delivery available
£1,230.00

1x Wooden Camera Panasonic EVA-1 Accessory Kit (Advanced)

This item is already in your basket

Wooden Camera Panasonic EVA-1 Accessory Kit (Advanced)

Shape VCT Tripod Plate

Find out more about the Shape VCT Tripod Plate

The VCT Tripod Plate from Shape is a quick-release plate based on a V-lock system with delta attachment at the front and a rear pin at the back. Made from aluminium, the SH-VCTSH comes with a new latch design to unlock the baseplate from the VCT plate and it comes with several 1/4"-20 and 3/8-16 threaded holes underneath to attach any tripod QR plate.

In StockSave £28Free delivery available
£247.00RRP £275.00

1x Shape VCT Tripod Plate

This item is already in your basket

Shape VCT Tripod Plate

SmallRig Cage for Nikon Z6/ Nikon Z7 Camera - 2243

Find out more about the SmallRig Cage for Nikon Z6/ Nikon Z7 Camera - 2243

The SmallRig Cage for Nikon Z6 and Nikon Z7 Cameras have been designed to provide protection for both your camera and accessory mount. It can be secured to the bottom of your Z6 or Z7 via the 1/4”-20 and m2.5 screws. Multiple 1/4"-20 and ARRI 3/8”-16 accessory threads, a cold shoe mount and side features will allow you use a whole host of accessories such

In StockFree delivery available
£91.99

1x SmallRig Cage for Nikon Z6/ Nikon Z7 Camera - 2243

This item is already in your basket

SmallRig Cage for Nikon Z6/ Nikon Z7 Camera - 2243

SmallRig Universal Holder for External SSD - BSH2343

Find out more about the SmallRig Universal Holder for External SSD - BSH2343

The SmallRig Universal Holder for External SSD has been designed to mount a SSD hard drive onto your camera. It’s specifically designed for cameras such as the BMPCC 4K & 6K and Z Cam E2. It features stretchable spring-loaded clamps that fit a large number of different SSDs and a detachable cold shoe which can be fixed on the bottom or side of the holder,

In Stock
£38.00

1x SmallRig Universal Holder for External SSD - BSH2343

This item is already in your basket

SmallRig Universal Holder for External SSD - BSH2343

SmallRig 2pcs 15mm Black Aluminum Alloy Rod (M12-30cm) 12inch

Find out more about the SmallRig 2pcs 15mm Black Aluminum Alloy Rod (M12-30cm) 12inch

Made from aluminium alloy, the two SmallRig 15mm Black Rods (M12-30cm) could be utilised for mounting various 15mm-compatible accessories to your camera rig.

Special Order
£13.00

1x SmallRig 2pcs 15mm Black Aluminum Alloy Rod (M12-30cm) 12inch

This item is already in your basket

SmallRig 2pcs 15mm Black Aluminum Alloy Rod (M12-30cm) 12inch

Shape Straight Shoulder Mount for Sony A7II A7SII + A7RII

Find out more about the Shape Straight Shoulder Mount for Sony A7II A7SII + A7RII

A comprehensive straight shoulder rig complete with 15mm rod support/baseplate, shoulder pad, Shape Quick Handles, push-button top handle and robust cage designed for the A7S II/A7R II/A7 II. The cage adds a layer of protection to your camera and multiple 1/5” screw threads for accessories such as monitors, viewfinders and recorders. The cage also includes

In StockFree delivery available
£730.00

1x Shape Straight Shoulder Mount for Sony A7II A7SII + A7RII

This item is already in your basket

Shape Straight Shoulder Mount for Sony A7II A7SII + A7RII

Vocas Spider Starter Kit

Find out more about the Vocas Spider Starter Kit

The Vocas Spider Starter Kit is a lightweight, compact, high-quality rig for DSLRs, mirrorless cameras and compact camcorders, such as the Sony PXW-FS5 and Canon 5D series. This modular starter kit contains 1x Spider Universal Camera Base, 1x Spider Extendable Arm (2x pieces), 1x Spider Shoulder Base, and 1x Spider Rubberised Handgrip.

In StockFree delivery available
£299.00

1x Vocas Spider Starter Kit

This item is already in your basket

Vocas Spider Starter Kit

Sachtler Ace Accessories Kit

Find out more about the Sachtler Ace Accessories Kit

The Sachtler Ace Accessories Kit upgrades a standard 75mm Sachtler tripod to make it a high-end video production workhorse. The kit includes a 15mm rod system, follow focus system, base plate, and matte box. Everything included is manufactured to the same stellar standards that Sachtler has become known for over the years.

Special OrderFree delivery available
£988.00

1x Sachtler Ace Accessories Kit

This item is already in your basket

Sachtler Ace Accessories Kit

Buy used from £799.00
SmallRig Cage Kit for Sony A7R III 2096

Find out more about the SmallRig Cage Kit for Sony A7R III 2096

The SmallRig Cage Kit 2096 is designed for the Sony A7RIII mirrorless camera. It offers great protection, lots of additional attachment options for the camera person, supports handheld shooting and comes with HDMI lock to protect the HDMI cable and cable port. The kit includes: 1x A7RIII Cage 2087, 1x HDMI Lock 1679, 1x NATO Rail 1409, and 1x NATO Handle

In StockFree delivery available
£159.00

1x SmallRig Cage Kit for Sony A7R III 2096

This item is already in your basket

SmallRig Cage Kit for Sony A7R III 2096

Vocas Handgrip Combi Rail Bracket

Find out more about the Vocas Handgrip Combi Rail Bracket

The Vocas Handgrip Combi Rail Bracket is designed for use on 19mm and 15mm lightweight rails, as well as 15mm studio rails. It is equipped with an Arri-style rosette and is compatible with the Blackmagic Design URSA Mini camera.

In StockFree delivery available
£147.00

1x Vocas Handgrip Combi Rail Bracket

This item is already in your basket

Vocas Handgrip Combi Rail Bracket

SmallRig DMW-XLR1 Helmet Kit for Panasonic S1/S1R and GH5/GH5s - HTS2367

Find out more about the SmallRig DMW-XLR1 Helmet Kit for Panasonic S1/S1R and GH5/GH5s - HTS2367

The SmallRig DMW-XLR1 Helmet Kit for Panasonic S1/S1R and GH5/GH5s has been designed to protect the Panasonic DMW-XLR1 Microphone Adapter. The helmet kit can be secured to the front of the SmallRig Cage (2345/2488/2049) through two 1/4"-20 screws. The numerous 1/4”-20 threads and Arri 3/8”-16 locating holes provide additional mounting solutions for accessories

Awaiting StockFree delivery available
£89.00

1x SmallRig DMW-XLR1 Helmet Kit for Panasonic S1/S1R and GH5/GH5s - HTS2367

This item is already in your basket

SmallRig DMW-XLR1 Helmet Kit for Panasonic S1/S1R and GH5/GH5s - HTS2367

Vocas USBP-15 MKII Baseplate

Find out more about the Vocas USBP-15 MKII Baseplate

The USBP-15 MKII Baseplate from Vocas is a new base plate that features everything you need to convert your camera into a shoulder camera. It's compatible with the Sony PXW-FS5, Arri Alexa Mini, Canon EOS C100/C300/C500 and the Panasonic Varicam HS/S35 camcorders.

In StockFree delivery available
£639.00

1x Vocas USBP-15 MKII Baseplate

This item is already in your basket

Vocas USBP-15 MKII Baseplate

Wooden Camera Sony A7S Accessory Kit (Advanced)

Find out more about the Wooden Camera Sony A7S Accessory Kit (Advanced)

This robust and comprehensive kit turns your A7S into a protected, bars mounted video camera with XLR ports for pro-level audio input. The cage adds multiple ¼ and 3/8 mounting threads whilst the expansive top cheeseplate with NATO-mounted handle offer even more flexibility. The height adjustable 15mm rod support is ideal for a matte box and follow focus.

Usually 5-7 DaysFree delivery available
£979.00

1x Wooden Camera Sony A7S Accessory Kit (Advanced)

This item is already in your basket

Wooden Camera Sony A7S Accessory Kit (Advanced)

Vocas 15mm Lens Support for Sony 28-135mm

Find out more about the Vocas 15mm Lens Support for Sony 28-135mm

Created specifically for use with the Sony 28-135mm lens, the Vocas 0360-0550-01 15mm Lens Support is designed to support the weight of the larger, heavier lens.

In StockFree delivery available
£131.25

1x Vocas 15mm Lens Support for Sony 28-135mm

This item is already in your basket

Vocas 15mm Lens Support for Sony 28-135mm

Vocas Double-Sided Handgrip Extender Medium (110mm)

Find out more about the Vocas Double-Sided Handgrip Extender Medium (110mm)

The 110mm Double-Sided Handgrip Extender from Vocas features Arri-style rosettes on both sides, and can be added to an existing rig to extend the position of a handgrip. It is compatible with the AJA Cion, Blackmagic URSA Mini, Sony PXDW-FS5, and Sony PXW-FS7 cameras, amongst others.

In StockFree delivery available
£89.00

1x Vocas Double-Sided Handgrip Extender Medium (110mm)

This item is already in your basket

Vocas Double-Sided Handgrip Extender Medium (110mm)

Vocas PL Support for H-Cheese Plate Sony PXW-FS7 / FS7 II

Find out more about the Vocas PL Support for H-Cheese Plate Sony PXW-FS7 / FS7 II

The Vocas PL Support can be mounted on the H-cheese plate (not included) for the Sony PXW-FS7 / FS7 II camcorder and supports the E-mount to PL adapter (not included).

In StockFree delivery available
£105.00

1x Vocas PL Support for H-Cheese Plate Sony PXW-FS7 / FS7 II

This item is already in your basket

Vocas PL Support for H-Cheese Plate Sony PXW-FS7 / FS7 II

SmallRig Swivel and Tilt Monitor Mount - BSE2294

Find out more about the SmallRig Swivel and Tilt Monitor Mount - BSE2294

The SmallRig Swivel and Tilt Monitor Mount has been designed to hold your external monitor to your camera cage or handle. This is achieved via the two 1/4”-20 screws that are provided in the box. This mount enables to swivel 360° sideways and tilt 150° without using tools. It’s lightweight at only 68g and can support 5”and 7”monitor up to 1.2kg. Sure enough,

In Stock
£49.00

1x SmallRig Swivel and Tilt Monitor Mount - BSE2294

This item is already in your basket

SmallRig Swivel and Tilt Monitor Mount - BSE2294

F+V 4.2inch Stainless Steel Articulating Arm

Find out more about the F+V 4.2inch Stainless Steel Articulating Arm

Designed to allow the mounting of LCD monitors or small LED panels on top of your camera via the shoe mount, the 4.2inch Stainless Steel Articulating Arm by F+V has a three-jointed arm for a greater range of movement, and a single-point lock knob to keep it secure. The cold shoe connector on the bottom of the arm can be removed to reveal a 1/4"-20 male

In Stock
£49.99

1x F+V 4.2inch Stainless Steel Articulating Arm

This item is already in your basket

F+V 4.2inch Stainless Steel Articulating Arm

Wooden Camera Pocket Cage

Find out more about the Wooden Camera Pocket Cage

This discreet, simple cage is designed to turn the Blackmagic Pocket Cinema into a production ready camera. It adds a range of ¼ inch screw threads so you can easily mount accessories such as monitors and viewfinders.

In StockFree delivery available
£79.00

1x Wooden Camera Pocket Cage

This item is already in your basket

Wooden Camera Pocket Cage

Kamera Honu Cage With Rod Holder for GH4 / A7S

Find out more about the Kamera Honu Cage With Rod Holder for GH4 / A7S

The Honu v2.0 Cage is compatible with the Panasonic GH3/GH4 and the Sony A7/A7r. With an extended battery cut out and a slotted camera mount, you will have full access to the battery, audio/video ports, and memory card. This version is supplied with 15mm bars support.

In StockFree delivery available
£139.00

1x Kamera Honu Cage With Rod Holder for GH4 / A7S

This item is already in your basket

Kamera Honu Cage With Rod Holder for GH4 / A7S

Vocas Shoulder Rig Pro Kit for Midsize Cameras

Find out more about the Vocas Shoulder Rig Pro Kit for Midsize Cameras

The Vocas Shoulder Rig Pro Kit for Midsize Cameras (e.g. Canon XH-A1, Panasonic HVX-200, Sony FS5 etc.) contains all the items required to convert your camcorder into a shoulder mounted camera. The kit includes a Pro Rail Support 15mm, Shoulder Support for 15mm rails, Offset Bracket for Shoulder Support Low, Handgrip Kit (with 2 handgrips), Weight Attachment

Usually 5-7 DaysFree delivery available
£1,373.40

1x Vocas Shoulder Rig Pro Kit for Midsize Cameras

This item is already in your basket

Vocas Shoulder Rig Pro Kit for Midsize Cameras

Vocas Spider Extendable Arm

Find out more about the Vocas Spider Extendable Arm

The Extendable Arm (item code: 0820-0010) from Vocas is compatible with the modular Spider System and can be adjusted in length from 165mm to 235mm. When mounted on the Universal Camera Base (not included) the arm can be rotated 360-degrees. On one end of the arm accessories can be mounted to a standard rosette.

In StockFree delivery available
£115.00

1x Vocas Spider Extendable Arm

This item is already in your basket

Vocas Spider Extendable Arm

SmallRig U-Base 1674

Find out more about the SmallRig U-Base 1674

This low-profile base plate is a simple and light base plate for the current popular cameras, such as Sony FS7, Sony A7 series, Canon C100/C300/C500. It attaches to a camera with a 3/8"-16 or 1/4"-20 screw and features 15 mm diameter and 60 mm spaced rod holes that allows you to mount a follow focus, matte box, lens support, or other accessories.

Special Order
£29.00

1x SmallRig U-Base 1674

This item is already in your basket

SmallRig U-Base 1674

Manfrotto and Wooden Camera - Camera Cage Small

Find out more about the Manfrotto and Wooden Camera - Camera Cage Small

Manfrotto and Wooden camera have teamed up to produce a range of high-end camera cages aimed at independent filmmakers who use DLSR or Mirrorless systems. The cage features a minimalist design, made from solid, lightweight metal with a wooden handle, while an adjustable top plate ensures a snug fit for most rigs. The cage also features a clamp for HDMI

In StockSave £60Free delivery available
£229.00RRP £289.95

1x Manfrotto and Wooden Camera - Camera Cage Small

This item is already in your basket

Manfrotto and Wooden Camera - Camera Cage Small

SmallRig Cage for Panasonic S1/S1R With DMW-BGS1 Battery Grip - CCP2410

Find out more about the SmallRig Cage for Panasonic S1/S1R With DMW-BGS1 Battery Grip - CCP2410

The SmallRig Cage for Panasonic S1/S1R With DMW-BGS1 Battery Grip provides protection for the camera and mounting threads to attach accessories such as a microphone, external monitors, and lights.

In StockFree delivery available
£119.00

1x SmallRig Cage for Panasonic S1/S1R With DMW-BGS1 Battery Grip - CCP2410

This item is already in your basket

SmallRig Cage for Panasonic S1/S1R With DMW-BGS1 Battery Grip - CCP2410

SmallRig Panasonic GH4/GH3 Cage 1585

Find out more about the SmallRig Panasonic GH4/GH3 Cage 1585

This is a compact, lightweight cage for the Panasonic Lumix DMC-GH4/GH3 camera with a refined structure that allows full access to the camera's controls. The top plate offers arrays of 1/4"-20 & 3/8"-16 mounting holes for attaching accessories. There is an inherent NATO rail on the left side which allows you to attach an EVF mount or Monitor without little

In StockFree delivery available
£99.00

1x SmallRig Panasonic GH4/GH3 Cage 1585

This item is already in your basket

SmallRig Panasonic GH4/GH3 Cage 1585

Shape Cage for Sony A7II A7SII + A7RII

Find out more about the Shape Cage for Sony A7II A7SII + A7RII

Designed for the A7S/A7R II/A7 II, this robust cage adds a layer of protection to your camera and multiple 1/5” screw threads for accessories such as monitors, viewfinders and recorders. The cage also includes a removable holder for Metabones lens adapters and a hotshoe attachment for the Sony XLR-KM2 audio unit.

In StockFree delivery available
£178.00

1x Shape Cage for Sony A7II A7SII + A7RII

This item is already in your basket

Shape Cage for Sony A7II A7SII + A7RII

Shape V-Lock Quick Release Baseplate with Adjustable Handle and Follow Focus Pro

Find out more about the Shape V-Lock Quick Release Baseplate with Adjustable Handle and Follow Focus Pro

A comprehensive shoulder-mount solution for the FS7 camcorder incorporating a VCT-mountable baseplate, 15mm rods at either end, an adjustable handle and Shape's Follow Focus Pro unit.

Usually 5-7 DaysFree delivery available
£1,999.00

1x Shape V-Lock Quick Release Baseplate with Adjustable Handle and Follow Focus Pro

This item is already in your basket

Shape V-Lock Quick Release Baseplate with Adjustable Handle and Follow Focus Pro

Shape Canon C200 Bundle Rig and Follow Focus Pro (Pro SM W/O Right Handle)

Find out more about the Shape Canon C200 Bundle Rig and Follow Focus Pro (Pro SM W/O Right Handle)

The Canon C200 Bundle Rig features a Quick Handle Grip compatible with all standard ARRI rosettes, Adapter Plate designed to be mounted at the bottom of the camera, and a Pro Shoulder Mount. If you want to use the Tripod option, the Baseplate also includes a delta plate and can be quickly mounted to a VCT Tripod Plate. Contains Follow Focus Pro.

Usually 5-7 DaysSave £193Free delivery available
£2,033.00RRP £2,226.00

1x Shape Canon C200 Bundle Rig and Follow Focus Pro (Pro SM W/O Right Handle)

This item is already in your basket

Shape Canon C200 Bundle Rig and Follow Focus Pro (Pro SM W/O Right Handle)

Shape Canon C200 Bundle Rig (Pro SM W/O Right Handle)

Find out more about the Shape Canon C200 Bundle Rig (Pro SM W/O Right Handle)

The Canon C200 Bundle Rig features a Quick Handle Grip compatible with all standard ARRI rosettes, Adapter Plate designed to be mounted at the bottom of the camera, and a Pro Shoulder Mount. If you want to use the Tripod option, the Baseplate also includes a delta plate and can be quickly mounted to a VCT Tripod Plate. Machined from lightweight CNC alu

Usually 5-7 DaysSave £170Free delivery available
£1,030.00RRP £1,200.00

1x Shape Canon C200 Bundle Rig (Pro SM W/O Right Handle)

This item is already in your basket

Shape Canon C200 Bundle Rig (Pro SM W/O Right Handle)

Vocas Double Sided Handgrip Extender Short (66mm)

Find out more about the Vocas Double Sided Handgrip Extender Short (66mm)

The 66mm Double Sided Handgrip Extender Short features Arri-style rosettes on both sides, and can be added to an existing rig to extend the position of a handgrip. It is compatible with the AJA Cion, Blackmagic URSA Mini, Sony PXDW-FS5, and Sony PXW-FS7 cameras, amongst others.

In StockFree delivery available
£75.00

1x Vocas Double Sided Handgrip Extender Short (66mm)

This item is already in your basket

Vocas Double Sided Handgrip Extender Short (66mm)

Custom Bracket HDV Pro Kit

Find out more about the Custom Bracket HDV Pro Kit

The new Custom Brackets HDV Pro Kit is designed to hold DSLR cameras, together with a range of accessories when used for video recordings. The bracket will hold the camera and in addition it has several mounting points to hold a monitor, an LED light and a microphone. It includes two comfortable foam grips for use at eye level and a handle at the back for

Awaiting StockFree delivery available
£179.99

1x Custom Bracket HDV Pro Kit

This item is already in your basket

Custom Bracket HDV Pro Kit

Kamera Honu Cage for GH4 / A7S

Find out more about the Kamera Honu Cage for GH4 / A7S

The Honu v2.0 Cage is compatible with the Panasonic GH3/GH4 and the Sony A7/A7r. With an extended battery cut out and a slotted camera mount, you will have full access to the battery, audio/video ports, and memory card.

In StockFree delivery available
£89.00

1x Kamera Honu Cage for GH4 / A7S

This item is already in your basket

Kamera Honu Cage for GH4 / A7S

Manfrotto and Wooden Camera - Camera Cage Large

Find out more about the Manfrotto and Wooden Camera - Camera Cage Large

Manfrotto and Wooden camera have teamed up to produce a range of high-end camera cages aimed at independent filmmakers who use DLSR or Mirrorless systems. The cage features a minimalist design, made from solid, lightweight metal with a wooden handle, while an adjustable top plate ensures a snug fit for most rigs. The cage also features a clamp for HDMI

In StockFree delivery available
£389.95

1x Manfrotto and Wooden Camera - Camera Cage Large

This item is already in your basket

Manfrotto and Wooden Camera - Camera Cage Large

SmallRig Cage for Panasonic Lumix DC-S1 and S1R - CCP2345

Find out more about the SmallRig Cage for Panasonic Lumix DC-S1 and S1R - CCP2345

The SmallRig Cage for Panasonic Lumix DC-S1 and S1R provides protection for the camera and mounting threads to attach accessories such as a microphone, external monitors, and lights.

In StockFree delivery available
£99.00

1x SmallRig Cage for Panasonic Lumix DC-S1 and S1R - CCP2345

This item is already in your basket

SmallRig Cage for Panasonic Lumix DC-S1 and S1R - CCP2345

Shape Revolt VCT Baseplate With Wooden Handle Grip

Find out more about the Shape Revolt VCT Baseplate With Wooden Handle Grip

The Revolt VCT universal baseplate offers a unique design, created for amateur and professional filmmakers seeking high quality camera stabilizers and supports. This bundle includes a perfect combination of our universal baseplate with high-quality Canadian wooden handle grip.

Usually 5-7 DaysFree delivery available
£1,062.00

1x Shape Revolt VCT Baseplate With Wooden Handle Grip

This item is already in your basket

Shape Revolt VCT Baseplate With Wooden Handle Grip

Panasonic AU-VSHL2 Shoulder Pad for VariCam LT

Find out more about the Panasonic AU-VSHL2 Shoulder Pad for VariCam LT

This Panasonic Shoulder Pad for serves as a shoulder support for the VariCam LT cinema video camera. It also functions as a 15 mm LWS rod baseplate for building up your rig. The camera interfaces with the Shoulder Mount via an ARRI-standard sliding quick-release plate, while the shoulder support itself complies with the VCT-14 standard.

Usually 5-7 DaysFree delivery available
£1,449.00

1x Panasonic AU-VSHL2 Shoulder Pad for VariCam LT

This item is already in your basket

Panasonic AU-VSHL2 Shoulder Pad for VariCam LT

Panasonic AU-VGRP1 Grip Module for VariCam LT

Find out more about the Panasonic AU-VGRP1 Grip Module for VariCam LT

The Panasonic AU-VGRP1 Grip Module is a handgrip that can be mounted to the VariCam LT cinema video camera. It has an ergonomic design and features a REC start/stop button.

Usually 5-7 DaysFree delivery available
£1,027.00

1x Panasonic AU-VGRP1 Grip Module for VariCam LT

This item is already in your basket

Panasonic AU-VGRP1 Grip Module for VariCam LT

Wooden Camera Canon C200/C200B Unified Accessory Kit (Base)

Find out more about the Wooden Camera Canon C200/C200B Unified Accessory Kit (Base)

The Wooden Camera Unified Accessory Kit (Base) is a support package designed for the Canon EOS C200 and C200B cameras. The C200/C200B accessory kit includes: a top mounting cheese plate for camera accessory attachment that also includes a Canon C200/C200B EVF Bracket Adapter, a Unified Baseplate, a quick release baseplate that holds two 15mm Rods at the

Usually 5-7 DaysFree delivery available
£924.00

1x Wooden Camera Canon C200/C200B Unified Accessory Kit (Base)

This item is already in your basket

Wooden Camera Canon C200/C200B Unified Accessory Kit (Base)

SmallRig Cage for Panasonic S1H Camera - CCP2488

Find out more about the SmallRig Cage for Panasonic S1H Camera - CCP2488

The SmallRig Cage for Panasonic S1H Camera has been designed to provide protection for both your camera and accessory mount. It can be secured to the bottom of your S1H via the 1/4”-20 and m2.5 screws. Multiple 1/4"-20 and ARRI 3/8”-16 accessory threads, a cold shoe mount and side features will allow you use a whole host of accessories such as microphones

Awaiting StockFree delivery available
£89.00

1x SmallRig Cage for Panasonic S1H Camera - CCP2488

This item is already in your basket

SmallRig Cage for Panasonic S1H Camera - CCP2488

SmallRig Swat Nato Clamp

Find out more about the SmallRig Swat Nato Clamp

The SmallRig 1255 Swat NATO Clamp comes with 1/4" and 3/8" standard mounting holes and is compatible with Safety Rails and SlideRail-Clamp.

In Stock
£28.99

1x SmallRig Swat Nato Clamp

This item is already in your basket

SmallRig Swat Nato Clamp

Vocas Base Plate MKII for Sony PXW-FS7 / FS7 II

Find out more about the Vocas Base Plate MKII for Sony PXW-FS7 / FS7 II

Compatible with other support systems, the Vocas Base Plate MK II (0350-1700) for the Sony PXW-FS7 MK II Super 35mm camera transforms the camera into a shoulder camera. Weighing it at just 560g (without rails), the plate features an adjustable rubber shoulder pad for additional comfort, fixed rosette attachments and one set of 15mm rails in the front and

Special OrderSave £32Free delivery available
£630.00Was £662.00

1x Vocas Base Plate MKII for Sony PXW-FS7 / FS7 II

This item is already in your basket

Vocas Base Plate MKII for Sony PXW-FS7 / FS7 II

SmallRig Quick Release Baseplate Kit for Panasonic Lumix GH5

Find out more about the SmallRig Quick Release Baseplate Kit for Panasonic Lumix GH5

Designed for the Panasonic GH5, the SmallRig Quick Release Baseplate Kit (2035) contains a baseplate, quick release plate, 2x hex spanners and 4x ¼"-20 screws. It allows attachment of a 15mm rail system and SmallRig Cage 2049 setup on the Panasonic Lumix GH5 compact system camera.

Special OrderFree delivery available
£88.00

1x SmallRig Quick Release Baseplate Kit for Panasonic Lumix GH5

This item is already in your basket

SmallRig Quick Release Baseplate Kit for Panasonic Lumix GH5

SmallRig SWAT Nato Rail with 15mm Rod Clamp (Parallel)

Find out more about the SmallRig SWAT Nato Rail with 15mm Rod Clamp (Parallel)

The SmallRig SWAT Nato Rail with 15mm Rod Clamp (Parallel) 1254 takes advantage of dual-mount capabilities, featuring SWAT and 15mm rail clamp to broaden your configuration options. The mount has two ratcheting levers to lock the accessory into place.

In Stock
£27.00

1x SmallRig SWAT Nato Rail with 15mm Rod Clamp (Parallel)

This item is already in your basket

SmallRig SWAT Nato Rail with 15mm Rod Clamp (Parallel)

Manfrotto and Wooden Camera - Camera Cage Baseplate

Find out more about the Manfrotto and Wooden Camera - Camera Cage Baseplate

Compatible with the Manfrotto and Wooden Camera collaborative camera cages, the Camera Cage 15mm Base Plate features space for 15mm rods, and users have the ability to adjust the plate’s height. The Base Plate is compatible with the Small, Medium, and Large versions of the Manfrotto and Wooden Camera Cage.

In StockFree delivery available
£194.95

1x Manfrotto and Wooden Camera - Camera Cage Baseplate

This item is already in your basket

Manfrotto and Wooden Camera - Camera Cage Baseplate

Shape Offset Shoulder Mount for Blackmagic Cinema Camera

Find out more about the Shape Offset Shoulder Mount for Blackmagic Cinema Camera

This offset rig for the Blackmagic Cinema Camera is ideal for the operator wanting to use the camera shoulder mounted with the LCD screen in their eyeline. It combines a robust cage with a shoulder mount and Shape Quick Handles, 15mm bars construction and an offset bracket. The cage section also incorporates 15mm bars on the top of the cage and an adjustable

Usually 5-7 DaysFree delivery available
£910.00

1x Shape Offset Shoulder Mount for Blackmagic Cinema Camera

This item is already in your basket

Shape Offset Shoulder Mount for Blackmagic Cinema Camera

Wooden Camera Advanced Kit (Pocket)

Find out more about the Wooden Camera Advanced Kit (Pocket)

Turn your Blackmagic Pocket Cinema into a full production ready filmmaking kit with this advanced cage and bars system. The kit combines the Pocket Quick cage, adjustable 15mm bars support, the quick release baseplate, a rotatable NATO-adjustable top handle and A-Box adapter offering you 2 x XLR inputs for professional microphones. The kit also protects

Usually 5-7 DaysFree delivery available
£939.00

1x Wooden Camera Advanced Kit (Pocket)

This item is already in your basket

Wooden Camera Advanced Kit (Pocket)

Vocas Shoulder Rig Pro DSLR Kit for Cameras without Battery Grip

Find out more about the Vocas Shoulder Rig Pro DSLR Kit for Cameras without Battery Grip

The Vocas Shoulder Rig Pro DSLR Kit contains all the items required to convert a camera into a shoulder mounted camera, including a Rail Support DSLR (for low-style DSLR), Shoulder Support for 15mm rails, 15mm Offset High Bracket for Shoulder Support, Handgrip Kit (with 2 handgrips), Topside Handgrip, Weight Attachment Plate for Shoulder Support and 1kg

Usually 5-7 DaysFree delivery available
£1,383.90

1x Vocas Shoulder Rig Pro DSLR Kit for Cameras without Battery Grip

This item is already in your basket

Vocas Shoulder Rig Pro DSLR Kit for Cameras without Battery Grip

Vocas USBP-19 MKII Baseplate

Find out more about the Vocas USBP-19 MKII Baseplate

The USBP-19 MKII Baseplate from Vocas is a height-adjustable 19mm base plate that features everything you need to convert your camera into a shoulder camera. It's compatible with a large variety of cameras, including the Canon EOS C100/C300/C500.

Usually 5-7 DaysFree delivery available
£1,249.50

1x Vocas USBP-19 MKII Baseplate

This item is already in your basket

Vocas USBP-19 MKII Baseplate

Sevenoak SK-R01 Shoulder Support Rig

Find out more about the Sevenoak SK-R01 Shoulder Support Rig

The Sevenoak SK-R01 Shoulder Support Rig features a comfortable foam padded shoulder mount and hand grip to help support your camera and keep it steady. The compact camera stabilisation rig reduces muscle fatigue whilst shooting, thereby reducing camera shake when filming. It is height adjustable and can be used on either shoulder, and the hand grip can

Awaiting StockFree delivery available
£84.99

1x Sevenoak SK-R01 Shoulder Support Rig

This item is already in your basket

Sevenoak SK-R01 Shoulder Support Rig

8Sinn BM Pocket Cinema Camera 4K Cage

Find out more about the 8Sinn BM Pocket Cinema Camera 4K Cage

Designed for the Black Magic Pocket Cine Camera 4K, the 8SINN cage has ergonomic and durable design built from one solid piece of aluminium that will provide access to both the battery and card openings. The 8SINN cage offers multiple ¼ threaded mounting points, as well as a cold shoe mount. There is also a conveniently located strap holder that allows

In StockFree delivery available
£275.00

1x 8Sinn BM Pocket Cinema Camera 4K Cage

This item is already in your basket

8Sinn BM Pocket Cinema Camera 4K Cage

SmallRig Wooden Universal Side Handle

Find out more about the SmallRig Wooden Universal Side Handle

The SmallRig Wooden Universal Side Handle has been designed to provide users with comfortable handheld shooting experience. It is locked via two thumb screws and fits any cage featuring two 1/4”-20 threaded holes with 18mm distance on the side. The ergonomic side handle can be attached to the left or the right side by loosening the two screws on the side

In StockFree delivery available
£74.99

1x SmallRig Wooden Universal Side Handle

This item is already in your basket

SmallRig Wooden Universal Side Handle

SmallRig Cold Shoe Adapter

Find out more about the SmallRig Cold Shoe Adapter

The SmallRig 1960 Cold Shoe Adapter made of Aluminium Alloy has a universal compatibility and can attach an Articulating Rosette Arm (7") 1497, microphone and wireless microphone receiver, and much more! It comes with ¼” holes which can be used to attach a GH5 Cage Panasonic Lumix GH5 1965, Top Plate for Blackmagic Ursa Mini / Mini Pro 1958, Side Plate

In Stock
£4.99

1x SmallRig Cold Shoe Adapter

This item is already in your basket

SmallRig Cold Shoe Adapter

Shape Composite Grip Shoulder Mount

Find out more about the Shape Composite Grip Shoulder Mount

Shape's ideal straight rig for use with DSLR and small camcorders. The system uses Shape's Quick Handles, simple baseplate with 15mm rods and a comfortable shoulder pad.

Awaiting StockFree delivery available
£586.00

1x Shape Composite Grip Shoulder Mount

This item is already in your basket

Shape Composite Grip Shoulder Mount

SmallRig 1726 Cage for Blackmagic Video Assist

Find out more about the SmallRig 1726 Cage for Blackmagic Video Assist

The SmallRig 1726 Cage is specially designed for the Blackmagic Video Assist with 5'' HD model. There is an integrated and anti-twisted NATO rail on top for attaching NATO standard accessories directly. SmallRig HDMI lock 1693 can be attached to this cage for HDMI port protecting. The monitor cage bottom allows you attach Articulating Arms to it. Moreover,

Special OrderFree delivery available
£89.00

1x SmallRig 1726 Cage for Blackmagic Video Assist

This item is already in your basket

SmallRig 1726 Cage for Blackmagic Video Assist

Shape Remote Extension Handle for FS7

Find out more about the Shape Remote Extension Handle for FS7

This replacement remote extension handle for the FS7 allows the operator you adjust the position and angle of the FS7 handgrip at the touch of a Shape push-button.

Usually 5-7 DaysFree delivery available
£209.00

1x Shape Remote Extension Handle for FS7

This item is already in your basket

Shape Remote Extension Handle for FS7

Vocas Underneath Shoulder Rig Pro for Midsize Cameras

Find out more about the Vocas Underneath Shoulder Rig Pro for Midsize Cameras

Consisting of a 15mm Pro Rail Support, an Underneath Shoulder Support, and a Vocas Handgrip kit with two handgrips, the Vocas Underneath Shoulder Rig Pro for Midsize Cameras allows you to instantly transform your camera into a shoulder mounted camera. For use with an external viewfinder or LCD monitor.

Usually 5-7 DaysFree delivery available
£1,191.75

1x Vocas Underneath Shoulder Rig Pro for Midsize Cameras

This item is already in your basket

Vocas Underneath Shoulder Rig Pro for Midsize Cameras

Vocas USBP-19/15D 19mm + 15mm Universal Shoulder Base Plate

Find out more about the Vocas USBP-19/15D 19mm + 15mm Universal Shoulder Base Plate

The Vocas USBP-19/15D features height-adjustable front 15mm and 19mm rails, optional rear 15mm rails, a horizontally-adjustable soft rubber shoulder pad, integrated rosette attachments, and an adjustable dove tail balance plate for optimal balance. Compatible with a large variety of cameras, it has everything you need to convert your camera into a shoulder

Usually 5-7 DaysFree delivery available
£939.75

1x Vocas USBP-19/15D 19mm + 15mm Universal Shoulder Base Plate

This item is already in your basket

Vocas USBP-19/15D 19mm + 15mm Universal Shoulder Base Plate

SmallRig Cage For Blackmagic Micro Cinema Camera 1773

Find out more about the SmallRig Cage For Blackmagic Micro Cinema Camera 1773

This is a perfect cage for Blackmagic Micro Cinema Camera or Blackmagic Micro Studio Camera, made of 1 piece of high-quality aluminium alloy. It is lightweight and with 2 screws on the bottom to mount it, the camera will be very stable when you're shooting. There are 2 strips in the back to protect the battery and it is convenient for handhold usage.

Special OrderFree delivery available
£79.00

1x SmallRig Cage For Blackmagic Micro Cinema Camera 1773

This item is already in your basket

SmallRig Cage For Blackmagic Micro Cinema Camera 1773

Shape Composite Rider Shoulder Mount

Find out more about the Shape Composite Rider Shoulder Mount

This rig utilises an offset bracket to bring the LCD screen on any DSLR into the operator's eyeline. Constructed using Shape's simple baseplate with adjustable 15mm bars support, shoulder pad and Quick Handle system, it also incorporates a useful handle section that adds ¼ inch and 3/8 inch threads to add accessories such as viewfinders, monitors and

Usually 5-7 DaysFree delivery available
£929.00

1x Shape Composite Rider Shoulder Mount

This item is already in your basket

Shape Composite Rider Shoulder Mount

Shape V-Lock Quick Release Baseplate with Adjustable Arm for Sony FS7

Find out more about the Shape V-Lock Quick Release Baseplate with Adjustable Arm for Sony FS7

A VCT baseplate with a removable shoulder pad build specifically for the dimensions of the FS7 camera, incorporating 15mm rods at both ends and rosette fittings for handle, with one Shape adjustable handle included.

Usually 5-7 DaysFree delivery available
£1,099.00

1x Shape V-Lock Quick Release Baseplate with Adjustable Arm for Sony FS7

This item is already in your basket

Shape V-Lock Quick Release Baseplate with Adjustable Arm for Sony FS7

Vocas Shoulder Rig Pro DSLR Kit for Cameras with Battery Grip

Find out more about the Vocas Shoulder Rig Pro DSLR Kit for Cameras with Battery Grip

The Vocas Shoulder Rig Pro DSLR Kit contains all the items required to convert a camera into a shoulder mounted camera, including a Rail Support DSLR (for high-style DSLR), Shoulder Support for 15mm rails, 15mm Offset High Bracket for Shoulder Support, Handgrip Kit (with 2 handgrips), Topside Handgrip, Weight Attachment Plate for Shoulder Support and 1kg

Usually 5-7 DaysFree delivery available
£1,383.90

1x Vocas Shoulder Rig Pro DSLR Kit for Cameras with Battery Grip

This item is already in your basket

Vocas Shoulder Rig Pro DSLR Kit for Cameras with Battery Grip

Vocas Shoulder Rig Pro Kit for Blackmagic Cinema Camera

Find out more about the Vocas Shoulder Rig Pro Kit for Blackmagic Cinema Camera

The Vocas Shoulder Rig Pro contains all the items required to convert your Blackmagic Cinema Camera into a shoulder mounted camera. The kit includes a Rail Support for Blackmagic Camera, Shoulder Support for 15mm rails, 15mm Offset High Bracket for Shoulder Support, Handgrip Kit (with 2 handgrips), Topside Handgrip, Weight Attachment Plate for Shoulder

Usually 5-7 DaysFree delivery available
£1,373.40

1x Vocas Shoulder Rig Pro Kit for Blackmagic Cinema Camera

This item is already in your basket

Vocas Shoulder Rig Pro Kit for Blackmagic Cinema Camera

Vocas Shoulder Rig Pro Kit Type L (universal)

Find out more about the Vocas Shoulder Rig Pro Kit Type L (universal)

Transform your camera into a shoulder mounted rig with the Vocas Shoulder Rig Pro Kit Type L. This kit features a Vocas Type L baseplate and has been specifically designed for the Panasonic AG-AF100, HDC-Z10000, Sony NEX-FS100, and NEX-FS700 camcorders, with space necessary to use the original viewfinder that come with these cameras.

Usually 5-7 DaysFree delivery available
£1,240.00

1x Vocas Shoulder Rig Pro Kit Type L (universal)

This item is already in your basket

Vocas Shoulder Rig Pro Kit Type L (universal)

Vocas Shoulder Rig Pro Kit Type M for Canon C100/300/500

Find out more about the Vocas Shoulder Rig Pro Kit Type M for Canon C100/300/500

Transform your Canon EOS C100/C300/C500 cinema camera into a shoulder mounted camera with the Vocas Shoulder Rig Pro Kit with Type M. Allows use with the camera's original viewfinder.

Usually 5-7 DaysFree delivery available
£1,113.00

1x Vocas Shoulder Rig Pro Kit Type M for Canon C100/300/500

This item is already in your basket

Vocas Shoulder Rig Pro Kit Type M for Canon C100/300/500