Sliders, Dollies, and Jibs

Find out more about the Ratrig V-Motion Fast Motor

The Ratrig V-Motion Fast Motor is a module of the separately available RatRig V-Motion Lite motorising kit for the V-Slider/V-Slider Mini. It works with a 12V DC-motor, is compatible with many other generic controllers and motor drivers, and it offers a great range of speeds for real time action. Top speed: 1 metre in 18 seconds (57 rpm) and lowest speed:

Find out more about the Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead

Ideal for lightweight cameras up to 1kg, the Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead offers full 360° movement, and is adjustable from 1.1 to 1.4 metres high. It allows users to control the underslung powerhead via the wired remote control box, which pans and tilts the camera. Two variable speed control knobs gives the head precise

Find out more about the Libec SWIFT JIB50 Extendable Jib Kit

The standard SWIFT JIB50 kit comes with carrying cases for each included item: jib arm, tripod and dolly. All black colour, including tripod and dolly. Please note that the illustrated balance weight is not included.

Find out more about the Hague D7 Ride On Tracker Camera Dolly System

Quick and simple to set up, the Hague D7 Ride On Tracker Camera Dolly System enables you to create super smooth tracking shots both on location and in the studio. The base of the ride is made up of an aluminium frame, and attached to this is a telescopic column with a 100mm bowl which can hold a video head. This system also features a swivel seat that allows

Find out more about the Rhino Shutter Release Cable - Nikon

With this Rhino Shutter Release Cable for Nikon cameras, users of the Rhino Motion (not included, available separately) can trigger their camera's shutter speed when using its built-in intervalometer. Simply connect this coiled-spring cable to your camera and the Rhino Motion, and then use the Advanced Time-Lapse menu to set the desired shutter duration.

Find out more about the Libec TR-320 Tracking Rail with Dolly

The TR-320 tracking rail kit includes a set of 80 cm (31.5") aluminium pipes to construct a 320 cm (126") rail. The included dolly has high-performance bearings and a specialized tracking system to prevent derailing, allowing smooth-moving shots on either straight or curved rails. The CR-90 curved rail and EX-160S straight extension rails are also available,

Find out more about the Hague Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

The Hague Camslide Drive carbon fibre camera slider will automatically pan the camera while you concentrate on the sliding. This ingenious design makes it so much easier to pan and slide at the same time because you only have to concentrate on the one movement.

Find out more about the Rhino Flywheel

The Rhino Flywheel uses the integrated belt drive of the EVO sliders to smooth out inconsistencies in your slides by acting as an inertia dampener. Featuring built-in rubber bumpers, this weighted accessory allows you to capture smoother, more consistent motion. It attaches very easily to the drive shaft and can be locked down with the tool-less fasten

Find out more about the RatRig X-Slider

Create Hollywood-esque sweeping camera movements at a fraction of the budget with the RatRig X-Slider. RatRig have made it possible to capture shots that were previously either difficult to achieve, or were even impossible. By combing 2 sliders into the shape of an X, you can now seamlessly switch between sidewards motion and tracking back and forth. You

Find out more about the Syrp Genie II 3-Axis Kit

The Syrp Genie II is made up of two independent motion controllers; Linear and Pan Tilt. By combining both with the Magic Carpet slider, you will have the ultimate 3-Axis motion control tool! This kit will have you sorted for almost any filming situation. Combining Genie II Pan Tilt with the Linear gives you the ultimate 3-Axis motion control tool. Set

Find out more about the Syrp Genie II Pan Tilt + Linear Combo

The Syrp Genie II with Pan/Tilt Head and Linear Combo is stronger, faster and quieter than its predecessor. The Linear drive is a supercharged version of the original, it features an in-built joystick and it can attach to any slider to transform it into a motion control device. The pan tilt head offers 3-axis motion control for time-lapse, video and panorama,

Find out more about the Rhino Extension Cable