Sliders, Dollies, and Jibs

119 Matching Products Displaying Page 5 of 10

Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead

Find out more about the Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead

Ideal for lightweight cameras up to 1kg, the Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead offers full 360° movement, and is adjustable from 1.1 to 1.4 metres high. It allows users to control the underslung powerhead via the wired remote control box, which pans and tilts the camera. Two variable speed control knobs gives the head precise movement at any required speed.

Special OrderFree delivery available
£948.00

1x Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead

This item is already in your basket

Hague K10-PH100 CamCrane Camera Jib with Remote Control Powerhead

Libec CR-90 90 degree curved Rail

Find out more about the Libec CR-90 90 degree curved Rail

The CR-90 is a versatile 90° curved rail that can be used with straight rails to make 45° or 90° curves.

Special OrderFree delivery available
£948.00

1x Libec CR-90 90 degree curved Rail

This item is already in your basket

Libec CR-90 90 degree curved Rail

iFootage Shark S1 and S1A1S Single Axis Motor Bundle

Find out more about the iFootage Shark S1 and S1A1S Single Axis Motor Bundle

This Shark Motor Bundle includes the iFootage Shark S1 Camera Slider and iFootage S1A1S Wireless Motion Controller System. Use on location or in the studio, the single axis, wireless remote control system is perfect for timelapse whilst sliding. Used in either remote manual or programmable mode the Shark Motor Bundle is lightweight, easy to setup and offers a 7kg maximum load. Note: the iFootage ...

Special OrderFree delivery available
£1,614.00

1x iFootage Shark S1 and S1A1S Single Axis Motor Bundle

This item is already in your basket

iFootage Shark S1 and S1A1S Single Axis Motor Bundle

iFootage Wireless Motion Control System Bundle

Find out more about the iFootage Wireless Motion Control System Bundle

The iFootage Wireless Motion Control System Bundle is designed and built specifically for the Shark Slider S1. It offers automotive control on two axis of camera movement: pan and tilt, either preset or in real time via the motion controller provided. Perfect for time-lapse and set camera movement such as interviews. Bundle includes: 1x Motion X2 Head, 1x Wireless Controller, 1x Power Cable, 1x ...

Special OrderFree delivery available
£1,650.00

1x iFootage Wireless Motion Control System Bundle

This item is already in your basket

iFootage Wireless Motion Control System Bundle

Syrp Genie Micro

Find out more about the Syrp Genie Micro

The Syrup Genie Micro comes as a welcome addition to the highly regarded Syrup line of products. Like all Syrup products, the Genie Micro is well-engineered and a professional product that will make your life easier as a photographer or videographer. It’s an all-in-one smart remote for use with mirrorless and DSLR cameras which allows you to wirelessly control your camera from the Syrup ...

In StockFree delivery available
£139.00

1x Syrp Genie Micro

This item is already in your basket

Syrp Genie Micro

Libec ALX S8 800mm Slider

Find out more about the Libec ALX S8 800mm Slider

The Libec ALX S8 allows your camera to have smooth and wobble-free sliding motion when mounted on 2 x 75 mm or flat-base tripods or placed on a flat surface.

In StockFree delivery available
£486.00

1x Libec ALX S8 800mm Slider

This item is already in your basket

Libec ALX S8 800mm Slider

Rhino Flywheel

Find out more about the Rhino Flywheel

The Rhino Flywheel uses the integrated belt drive of the EVO sliders to smooth out inconsistencies in your slides by acting as an inertia dampener. Featuring built-in rubber bumpers, this weighted accessory allows you to capture smoother, more consistent motion. It attaches very easily to the drive shaft and can be locked down with the tool-less fastener.

Special OrderFree delivery available
£111.99

1x Rhino Flywheel

This item is already in your basket

Rhino Flywheel

Hague Camslide Edge Carbon Fibre Slider

Find out more about the Hague Camslide Edge Carbon Fibre Slider

The Hague Camslide Edge Carbon Fibre Slider provides filmmakers with 80cm of high-quality, smooth sliding movement for professional tracking shots. Use it on the ground, table, or tripod mounted, the lightweight Camslide Edge features adjustable feet, a spirit level, a ¼" screw and 3/8" adapter for mounting ball and video heads, an 8kg maximum load, and 6 roller bearings to ensure a smooth, ...

Special OrderFree delivery available
£198.00

1x Hague Camslide Edge Carbon Fibre Slider

This item is already in your basket

Hague Camslide Edge Carbon Fibre Slider

Hague Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

Find out more about the Hague Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

The Hague Camslide Drive carbon fibre camera slider will automatically pan the camera while you concentrate on the sliding. This ingenious design makes it so much easier to pan and slide at the same time because you only have to concentrate on the one movement.

Special OrderFree delivery available
£288.00

1x Hague Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

This item is already in your basket

Hague Camslide Drive Carbon Fibre Camera Slider With Auto Pan System

Rhino Slider Carbon 42 Inch

Find out more about the Rhino Slider Carbon 42 Inch

The Rhino Slider Carbon 42 Inch weighs only 4Ibs 12oz and has a load capacity of 10Ibs. It’s long but lightweight rails allow the user to capture more movement that aids the creation of stunning time-lapses. The rails have been upgraded with the new Tripod Quick Mount System which allows the slider to be mounted onto tripods in a significantly less amount of time without the need to spin it ...

In StockSave £128Free delivery available
£762.00RRP £890.00

1x Rhino Slider Carbon 42 Inch

This item is already in your basket

Rhino Slider Carbon 42 Inch

Konova K5 Slider Kit 80cm

Find out more about the Konova K5 Slider Kit 80cm

The K5 range of sliders from Konova are suitable for mid-sized camcorders such as the Canon C100, Blackmagic Cinema Camera and Sony FS5. Smooth, stable and able to carry a payload of 23kg, they are supplied compete with adjustable legs, tools and a soft carry case. This model is 80cm in length.

Awaiting StockFree delivery available
£300.00

1x Konova K5 Slider Kit 80cm

This item is already in your basket

Konova K5 Slider Kit 80cm

Ratrig V-Motion Fast Motor

Find out more about the Ratrig V-Motion Fast Motor

The Ratrig V-Motion Fast Motor is a module of the separately available RatRig V-Motion Lite motorising kit for the V-Slider/V-Slider Mini. It works with a 12V DC-motor, is compatible with many other generic controllers and motor drivers, and it offers a great range of speeds for real time action. Top speed: 1 metre in 18 seconds (57 rpm) and lowest speed: 1 metre in 3 minutes.

Special OrderFree delivery available
£50.00

1x Ratrig V-Motion Fast Motor

This item is already in your basket

Ratrig V-Motion Fast Motor